journal article·2022-10

Evolution of microstructure and mechanical properties of cold-rolled Ti-34Nb-(0, 0.3, 0.6)O alloys during aging

Xiangwei Wu, Wenqian Zou, Jindu Huang, Feng Chen

Journal of Materials Science· Volume 57· Issue 40
Publisher page

Abstract

This study investigated the effects of O content on microstructure and mechanical properties of cold-rolled Ti-34Nb-(0, 0.3, 0.6)O (wt.%) alloys during aging within a wide temperature range (300 °C ~ 550 °C) by means of TMA, XRD, TEM and SEM. With the increase of aging temperature, it is found that: (1) O suppresses the precipitation of ω phase, thereby delaying the precipitation of α phase, and increases the precipitation peak temperature of α phase; (2) O inhibits the growth, spheroidization and decomposition of α phase, and increases the (α + β)/β phase transformation temperature; (3) at the same aging temperature (400 °C ~ 550 °C), oxygen-enriched alloys have higher strength and elastic properties. The elastic allowable strain (σ0.2/E) of Ti-34Nb-(0.3, 0.6)O alloys after aging at 400 °C × 8 h is up to 1.8%, which makes them suitable for preparing heat-resistant and high-elastic components for aerospace field. Ti-34Nb-0.3O alloy after aging at 450 °C × 8 h exhibits lower elastic modulus, high strength and good elongation, and has a good application prospect in the field of human implant materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Wang X, Jahazi M, Yue S (2008) Investigation of α platelet boundaries in a near-α titanium alloy. Mater Sci Eng A 492:450–454. https://doi.org/10.1016/j.msea.2008.03.04110.1016/j.msea.2008.03.041 ↗
2. Geetha M, Mudali UK, Gogia AK, Asokamani R, Raj B (2004) Influence of microstructure and alloying elements on corrosion behavior of Ti-13Nb-13Zr alloy. Corros Sci 46:877–892. https://doi.org/10.1016/S0010-938X(03)00186-010.1016/S0010-938X(03)00186-0 ↗
3. Bohemen S, Kamp A, Petrov RH, Kestens L, Sietsma J (2008) Nucleation and variant selection of secondary α plates in a β Ti alloy. Acta Mater 56:5907–5914. https://doi.org/10.1016/j.actamat.2008.08.01610.1016/j.actamat.2008.08.016 ↗
4. Boyer RR (1996) An overview on the use of titanium in the aerospace industry. Mater Sci Eng A 213:103–114. https://doi.org/10.1016/0921-5093(96)10233-110.1016/0921-5093(96)10233-1 ↗
5. Kenta D, Wang G, Wang W, Dargusch MS (2012) Influence of ageing temperature and heating rate on the properties and microstructure of β Ti alloy, Ti-6Cr-5Mo-5V-4Al. Mater Sci Eng A 531:98–106. https://doi.org/10.1016/j.msea.2011.10.04010.1016/j.msea.2011.10.040 ↗
6. Niinomi M, Nakai M, Hieda J (2012) Development of new metallic alloys for biomedical applications. Acta Biomater 8:3888–3903. https://doi.org/10.1016/j.actbio.2012.06.03710.1016/j.actbio.2012.06.037 ↗
7. Talling RJ, Dashwood RJ, Jackson M, Dye D (2009) On the mechanism of superelasticity in Gum metal. Acta Mater 57:1188–1198. https://doi.org/10.1016/j.actamat.2008.11.01310.1016/j.actamat.2008.11.013 ↗
8. Bönisch M, Panigrahi A, Calin M, Waitz T, Zehetbauer M, Skrotzki W, Eckert J (2017) Thermal stability and latent heat of Nb-rich martensitic Ti-Nb alloys. J Alloys Compd 697:300–309. https://doi.org/10.1016/j.jallcom.2016.12.10810.1016/j.jallcom.2016.12.108 ↗
9. Banerjee D, Williams JC (2013) Perspectives on titanium science and technology. Acta Mater 61:844–879. https://doi.org/10.1016/j.actamat.2012.10.04310.1016/j.actamat.2012.10.043 ↗
10. Kolli R, Devaraj A (2018) A review of metastable beta titanium alloys. Metals 8:506. https://doi.org/10.3390/met807050610.3390/met8070506 ↗
11. Banerjee S, Tewari R, Dey GK (2006) Omega phase transformation-morphologies and mechanisms. Int J Mater Res 97:963–977
12. Weiss I, Semiatin SL (1998) Thermomechanical processing of beta titanium alloys-an overview. Mater Sci Eng A 243:46–65. https://doi.org/10.1016/S0921-5093(97)00783-110.1016/S0921-5093(97)00783-1 ↗
13. Ivasishin OM, Markovsky PE, Matviychuk YV, Semiatin SL, Ward CH, Fox S (2008) A comparative study of the mechanical properties of high-strength β-titanium alloys. J Alloys Compd 457:296–309. https://doi.org/10.1016/j.jallcom.2007.03.07010.1016/j.jallcom.2007.03.070 ↗
14. Hao YL, Niinomi M, Kuroda D, Fukunaga K, Zhou YL, Yang R, Suzuki A (2003) Aging response of the Young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr for biomedical applications. Metall Mater Trans A 34:1007–1012. https://doi.org/10.1007/s11661-003-0230-x10.1007/s11661-003-0230-x ↗
15. Mello MD, Salvador CF, Cremasco A, Caram R (2015) The effect of Sn addition on phase stability and phase evolution during aging heat treatment in Ti-Mo alloys employed as biomaterials. Mater Charact 110:5–13. https://doi.org/10.1016/j.matchar.2015.10.00510.1016/j.matchar.2015.10.005 ↗
16. Du ZX, Xiao SL, Shen YP, Liu JS, Liu J, Xu LJ, Kong FT, Chen YY (2015) Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength beta titanium alloy sheets. Mater Sci Eng A 631:67–74. https://doi.org/10.1016/j.msea.2015.02.03010.1016/j.msea.2015.02.030 ↗
17. Niinomi M, Nakai M, Hendrickson M, Nandwana P, Alam T, Choudhuri D, Banerjee R (2016) Influence of oxygen on omega phase stability in the Ti-29Nb-13Ta-4.6 Zr alloy. Scripta Mater 123:144–148. https://doi.org/10.1016/j.scriptamat.2016.06.02710.1016/j.scriptamat.2016.06.027 ↗
18. Qazi JI, Marquardt B, Allard LF, Rack HJ (2005) Phase transformations in Ti-35Nb-7Zr-5Ta-(0.06-0.68)O alloys. Mat Sci Eng C 25:389–397. https://doi.org/10.1016/j.msec.2005.01.02210.1016/j.msec.2005.01.022 ↗
19. Nakai M, Niinomi M, Akahori T, Tsutsumi H, Ogawa M (2009) Effect of oxygen content on microstructure and mechanical properties of biomedical Ti-29Nb-13Ta-4.6Zr alloy under solutionized and aged conditions. Mater Trans 50:2716–2720. https://doi.org/10.2320/matertrans.MA20090410.2320/matertrans.MA200904 ↗
20. Lan CB, Chen F, Chen HJ, Wu YL, Wu XW (2018) Influence of oxygen content on the microstructure and mechanical properties of cold rolled Ti-32.5Nb-6.8Zr-2.7Sn-xO alloys after aging treatment. J Mater Sci Technol 34:134–140. https://doi.org/10.1016/j.jmst.2018.03.00810.1016/j.jmst.2018.03.008 ↗
21. Blackburn MJ, Williams JC (1968) Phase Transformations in Ti--Mo and Ti--V alloys. Boeing Scientific Research Labs, Seattle.
22. Tong L, Damon K, Gang S, Liu H, Fries SG, Ceguerra AV, Dargusch MS, Cairney JM (2018) Nucleation driving force for ω-assisted formation of α and associated ω morphology in β-Ti alloys. Scripta Mater 155:149–154. https://doi.org/10.1016/j.scriptamat.2018.06.03910.1016/j.scriptamat.2018.06.039 ↗
23. Li DD, Wan WF, Zhu LQ, Jiang Y, Shao SQ, Yang GJ, Liu HQ, Yi DQ et al (2018) Experimental and DFT characterization of interphase boundaries in titanium and the implications for ω-assisted α phase precipitation. Acta Mater 151:406–415. https://doi.org/10.1016/j.actamat.2018.03.05610.1016/j.actamat.2018.03.056 ↗
24. Williams JC, Hickman BS, Leslie DH (1971) The effect of ternary additions on the decompositon of metastable beta-phase titanium alloys. Metall Trans 2:477–484. https://doi.org/10.1007/BF0266333710.1007/BF02663337 ↗
25. Homma T, Arafah A, Haley D, Nakai M, Niinomi M, Moody MP (2018) Effect of alloying elements on microstructural evolution in oxygen content controlled Ti-29Nb-13Ta-4.6 Zr (wt%) alloys for biomedical applications during aging. Mater Sci Eng A 709:312–321. https://doi.org/10.1016/j.msea.2017.10.01810.1016/j.msea.2017.10.018 ↗
26. Chou K, Marquis EA (2019) Oxygen effects on ω and α phase transformations in a metastable β Ti-Nb alloy. Acta Mater 181:367–376. https://doi.org/10.1016/j.actamat.2019.09.04910.1016/j.actamat.2019.09.049 ↗
27. Chou K, Li N, Marquis EA (2021) Enhanced work hardening from oxygen-stabilized ω precipitates in an aged metastable β Ti-Nb alloy. Acta Mater 220:117302. https://doi.org/10.1016/j.actamat.2021.11730210.1016/j.actamat.2021.117302 ↗
28. Chou K, Neill O, Marquis EA (2021) Oxygen-induced refinement of α precipitates in an aged metastable β Ti-15-333 alloy. Scripta Mater 205:114206. https://doi.org/10.1016/j.scriptamat.2021.11420610.1016/j.scriptamat.2021.114206 ↗
29. Chou K, Marquis EA (2021) Role of Oxygen on the Precipitation and Deformation Behavior of an Aged β Ti-15Mo Alloy. J Alloys Compd 891:161811. https://doi.org/10.1016/j.jallcom.2021.16181110.1016/j.jallcom.2021.161811 ↗
30. Pinotti VE, Plaine AH, Silva M, Bolfarini C (2021) Influence of oxygen addition and aging on the microstructure and mechanical properties of a β-Ti-29Nb-13Ta-4Mo alloy. Mater Sci Eng A 819(18):141500. https://doi.org/10.1016/j.msea.2021.14150010.1016/j.msea.2021.141500 ↗
31. Takahashi E, Sakurai T, Watanabe S, Masahashi N, Hanada S (2002) Effect of heat treatment and Sn content on superelasticity in biocompatible TiNbSn alloys. Mater Trans 43:2978–2983. https://doi.org/10.2320/matertrans.43.297810.2320/matertrans.43.2978 ↗
32. Zhang LC, Zhou T, Alpay SP, Aindow M, Wu MH (2005) Origin of pseudoelastic behavior in Ti-Mo-based alloys. Appl Phys Lett 87:241909. https://doi.org/10.1063/1.214208910.1063/1.2142089 ↗
33. Kim HY, Ikehara Y, Kim JI, Hosoda H, Miyazaki S (2006) Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys. Acta Mater 54:2419–2429. https://doi.org/10.1016/j.actamat.2006.01.01910.1016/j.actamat.2006.01.019 ↗
34. Tahara M, Kim HY, Inamura T, Hosoda H, Miyazaki S (2011) Lattice modulation and superelasticity in oxygen-added β-Ti alloys. Acta Mater 59:6208–6218. https://doi.org/10.1016/j.actamat.2011.06.01510.1016/j.actamat.2011.06.015 ↗
35. Tane M, Nakano T, Kuramoto S, Hara M, Niinomi M, Takesue N, Yano T, Nakajima H (2011) Low young’s modulus in Ti-Nb-Ta-Zr-O alloys: cold working and oxygen effects. Acta Mater 59:6975–6988. https://doi.org/10.1016/j.actamat.2011.07.05010.1016/j.actamat.2011.07.050 ↗
36. Nii Y, Arima TH, Kim HY, Miyazaki S (2010) Effect of randomness on ferroelastic transitions: Disorder-induced hysteresis loop rounding in Ti-Nb-O martensitic alloy. Phys Rev B. https://doi.org/10.1103/PhysRevB.82.21410410.1103/PhysRevB.82.214104 ↗
37. Guo WY, Li J, Sun J (2010) Thermal expansion behavior of Ti-23Nb-0 7Ta-2Zr-O alloy. Mat Res Appl 4:169
38. Wu XW, Zou WQ, Huang JD, Wu YL, Luo C, Lan CB, Chen F (2021) The mechanism of negative linear thermal expansion behavior of cold-rolled Ti-34Nb alloy. J Mater Sci 56:5190–5200. https://doi.org/10.1007/s10853-020-05574-710.1007/s10853-020-05574-7 ↗
39. Li T, Kent D, Sha G, Stephenson LT, Ceguerra AV, Ringer SP, Dargusch MS, Cairney JM (2016) New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys. Acta Mater 106:353–366. https://doi.org/10.1016/j.actamat.2015.12.04610.1016/j.actamat.2015.12.046 ↗
40. Li T, Kent D, Sha G, Liu HW, Fries SG, Ceguerra AV, Dargusch MS, Cairney JM (2018) Nucleation driving force for ω-assisted formation of α and associated ω morphology in β-Ti alloys. Scripta Mater 155:149–154. https://doi.org/10.1016/j.scriptamat.2018.06.03910.1016/j.scriptamat.2018.06.039 ↗
41. Kim HY, Wei L, Kobayashi S, Tahara M, Miyazaki S (2013) Nanodomain structure and its effect on abnormal thermal expansion behavior of a Ti-23Nb-2Zr-0.7Ta-1.2O alloy. Acta Mater 61:4874–4886. https://doi.org/10.1016/j.actamat.2013.04.06010.1016/j.actamat.2013.04.060 ↗
42. Niu JG, Ping DH, Ohno T, Geng WT (2014) Suppression effect of oxygen on the β to ω transformation in a β-type Ti alloy: insights from first-principles. Modell Simul Mater Sci Eng 22:15007–15015. https://doi.org/10.1088/0965-0393/22/1/01500710.1088/0965-0393/22/1/015007 ↗
43. Hao YL, Zhang ZB, Li SJ, Yang R (2012) Microstructure and mechanical behavior of a Ti-24Nb-4Zr-8Sn alloy processed by warm swaging and warm rolling. Acta Mater 60:2169–2177. https://doi.org/10.1016/j.actamat.2012.01.00310.1016/j.actamat.2012.01.003 ↗
44. Li T, Kent D, Sha G, Dargusch MS, Cairney JM (2015) The mechanism of ω-assisted α phase formation in near β-Ti alloys. Scripta Mater 104:75–78. https://doi.org/10.1016/j.scriptamat.2015.04.00710.1016/j.scriptamat.2015.04.007 ↗
45. Li T, Kent D, Sha G, Cairney JM, Dargusch MS (2016) The role of ω in the precipitation of α in near-β Ti alloys. Scripta Mater 117:92–95. https://doi.org/10.1016/j.scriptamat.2016.02.02610.1016/j.scriptamat.2016.02.026 ↗
46. Prima F, Vermaut P, Texier G, Ansel D, Gloriant T (2006) Evidence of α-nanophase heterogeneous nucleation from ω particles in a β-metastable Ti-based alloy by high-resolution electron microscopy. Scripta Mater 54:645–648. https://doi.org/10.1016/j.scriptamat.2005.10.02410.1016/j.scriptamat.2005.10.024 ↗
47. Sadeghpour S, Abbasi SM, Morakabati M, Bruschi S (2017) Correlation between alpha phase morphology and tensile properties of a new beta titanium alloy. Mater Design 121:24–35. https://doi.org/10.1016/j.matdes.2017.02.04310.1016/j.matdes.2017.02.043 ↗
48. Meng M, Fan XG, Yang H, Guo LG, Zhan M, Gao PF (2017) Precipitation of secondary alpha in competition with epitaxial growth of primary alpha in two-phase titanium alloys. J Alloy Compd 714:294–302. https://doi.org/10.1016/j.jallcom.2017.04.20910.1016/j.jallcom.2017.04.209 ↗
49. Kathleen C, Marquis EA (2019) Oxygen effects on ω and α phase transformations in a metastable β Ti-Nb alloy. Acta Mater 181:367–376. https://doi.org/10.1016/j.actamat.2019.09.04910.1016/j.actamat.2019.09.049 ↗
50. Lan CB, Wu Y, Li G, Chen F (2017) Effects of cold rolling on microstructure, texture evolution and mechanical properties of Ti-32.5Nb-6.8Zr-2.7Sn-0.3O alloy for biomedical applications. Mater Sci Eng A 690:170–176. https://doi.org/10.1016/j.msea.2017.02.04510.1016/j.msea.2017.02.045 ↗
51. Besse M, Castany P, Gloriant T (2011) Mechanisms of deformation in gum metal TNTZ-O and TNTZ titanium alloys: a comparative study on the oxygen influence. Acta Mater 59:5982–5988. https://doi.org/10.1016/j.actamat.2011.06.00610.1016/j.actamat.2011.06.006 ↗
52. Chen W, Cao S, Kou W, Zhang J, Wang Y, Zha Y, Pan Y, Hu Q et al (2019) Origin of the ductile-to-brittle transition of metastable β-titanium alloys: self-hardening of ω-precipitates. Acta Mater 170:187–204. https://doi.org/10.1016/j.actamat.2019.03.03410.1016/j.actamat.2019.03.034 ↗
53. Cardoso FF, Ferrandini PL, Lopes ES, Cremasco A, Caram R (2014) Ti-Mo alloys employed as biomaterials: effects of composition and aging heat treatment on microstructure and mechanical behavior. J Mech Behav Biomed 32:31–38. https://doi.org/10.1016/j.jmbbm.2013.11.02110.1016/j.jmbbm.2013.11.021 ↗
54. Nakai M, Niinomi M, Oneda T (2012) Improvement in fatigue strength of biomedical β-type Ti-Nb-Ta-Zr alloy while maintaining low Young’s modulus through optimizing ω-phase precipitation. Metall Mater Trans A 43:294–302. https://doi.org/10.1007/s11661-011-0860-310.1007/s11661-011-0860-3 ↗