Electrical conductivity of graphene-containing composites by the conduction and volume share of networked interphase and the properties of tunnels applicable in breast cancer sensors
Source abstract
Abstract
An original model is advanced for conductivity of polymer graphene composites by tunneling effect and interphase piece. The conduction and volume share of networked interphase are defined and considered. Besides, the properties of tunnels such as tunneling length, tunneling resistivity and contact diameter are supposed, which affect the percolation beginning and conductivity. Consequently, the novel model approximates the nanocomposite’s conductivity by the properties of graphene, tunnels and interphase. The impressions of all factors on the conductivity are evaluated and justified. Furthermore, the model’s forecasts are matched to the experimented facts of some examples. The conduction and diameter of graphene directly affect the conductivity. Additionally, the suggested model shows the positive characters of big interphase and narrow tunnels in the conductivity, despite the fact that narrow interphase and large tunnels cause an insulated nanocomposite. The outputs of novel model display good matching with the experimented facts. These evidences confirm the correctness of the suggested model, which can replace the conventional models in future studies. The developed model can optimize the breast cancer sensors, because the conductivity is an important term for detection.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Carbon Nanotubes in Composites · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Wong D, Anwar M, Debnath S, Hamid A, Izman S (2021) A review: recent development of natural fiber-reinforced polymer nanocomposites. JOM 73(8):2504–251510.1007/s11837-021-04749-0 ↗
2. Boraei SBA, Nourmohammadi J, Mahdavi FS, Zare Y, Rhee KY, Montero AF et al (2022) Osteogenesis capability of three-dimensionally printed poly (lactic acid)-halloysite nanotube scaffolds containing strontium ranelate. Nanotechnol Rev 11(1):1901–191010.1515/ntrev-2022-0113 ↗
3. Farzaneh A, Rostami A, Nazockdast H (2021) Thermoplastic polyurethane/multiwalled carbon nanotubes nanocomposites: effect of nanoparticle content, shear, and thermal processing. Polym Compos 42(9):4804–481310.1002/pc.26190 ↗
4. Tajdari A, Babaei A, Goudarzi A, Partovi R, Rostami A (2021) Hybridization as an efficient strategy for enhancing the performance of polymer nanocomposites. Polym Compos 42(12):6801–681510.1002/pc.26341 ↗
5. Zare Y (2015) Modeling of tensile modulus in polymer/carbon nanotubes (CNT) nanocomposites. Synth Met 202:68–7210.1016/j.synthmet.2015.02.002 ↗
6. Zare Y, Garmabi H (2012) Nonisothermal crystallization and melting behavior of PP/nanoclay/CaCO3 ternary nanocomposite. J Appl Polym Sci 124(2):1225–123310.1002/app.35134 ↗
7. Mohammadpour-Haratbar A, Kiaeerad P, Mazinani S, Bazargan AM, Sharif F (2022) Bimetallic nickel–cobalt oxide nanoparticle/electrospun carbon nanofiber composites: preparation and application for supercapacitor electrode. Ceram Int 48(7):10015–1002310.1016/j.ceramint.2021.12.210 ↗
8. Mohammadpour-Haratbar A, Zare Y, Rhee KY (2022) Development of a theoretical model for estimating the electrical conductivity of a polymeric system reinforced with silver nanowires applicable for the biosensing of breast cancer cells. J Market Res 18:4894–4902
9. Boraei SBA, Nourmohammadi J, Mahdavi FS, Yus J, Ferrandez-Montero A, Sanchez-Herencia AJ et al (2020) Effect of SrR delivery in the biomarkers of bone regeneration during the in vitro degradation of HNT/GN coatings prepared by EPD. Colloids Surf, B 190:11094410.1016/j.colsurfb.2020.110944 ↗
10. Kong L, Rau A, Yang N, Lu K (2021) Flexible ZnO nanoparticle-poly (methyl methacrylate) hybrid films and their ultraviolet shielding behaviors. JOM 73(1):432–44010.1007/s11837-020-04454-4 ↗
11. Ghasemi AR, Soleymani M (2021) A new efficient buckling investigation of functionally graded CNT/fiber/polymer/metal composite panels exposed to hydrostatic pressure considering simultaneous manufacturing-induced agglomeration and imperfection issues. Eur Phys J Plus 136(12):1–2510.1140/epjp/s13360-021-02197-y ↗
12. Sieradzka M, Fabia J, Biniaś D, Graczyk T, Fryczkowski R (2021) High-impact polystyrene reinforced with reduced graphene oxide as a filament for fused filament fabrication 3D printing. Materials 14(22):700810.3390/ma14227008 ↗
13. Payandehpeyman J, Mazaheri M, Khamehchi M (2020) Prediction of electrical conductivity of polymer-graphene nanocomposites by developing an analytical model considering interphase, tunneling and geometry effects. Compos Commun 21:10036410.1016/j.coco.2020.100364 ↗
14. Colonna S, Monticelli O, Gomez J, Novara C, Saracco G, Fina A (2016) Effect of morphology and defectiveness of graphene-related materials on the electrical and thermal conductivity of their polymer nanocomposites. Polymer 102:292–30010.1016/j.polymer.2016.09.032 ↗
15. Haghgoo M, Ansari R, Hassanzadeh-Aghdam M (2022) Monte Carlo analytical-geometrical simulation of piezoresistivity and electrical conductivity of polymeric nanocomposites filled with hybrid carbon nanotubes/graphene nanoplatelets. Compos A Appl Sci Manuf 152:10671610.1016/j.compositesa.2021.106716 ↗
16. Haghgoo M, Ansari R, Hassanzadeh-Aghdam M (2022) Predicting effective electrical resistivity and conductivity of carbon nanotube/carbon black-filled polymer matrix hybrid nanocomposites. J Phys Chem Solids 161:11044410.1016/j.jpcs.2021.110444 ↗
17. Haghgoo M, Ansari R, Hassanzadeh-Aghdam MK (2020) The effect of nanoparticle conglomeration on the overall conductivity of nanocomposites. Int J Eng Sci 157:10339210.1016/j.ijengsci.2020.103392 ↗
18. Kazemi F, Mohammadpour Z, Naghib SM, Zare Y, Rhee KY (2021) Percolation onset and electrical conductivity for a multiphase system containing carbon nanotubes and nanoclay. J Market Res 15:1777–1788
19. Maiti S, Bera R, Karan SK, Paria S, De A, Khatua BB (2019) PVC bead assisted selective dispersion of MWCNT for designing efficient electromagnetic interference shielding PVC/MWCNT nanocomposite with very low percolation threshold. Compos Part B: Eng 167:377–38610.1016/j.compositesb.2019.03.012 ↗
20. Zare Y, Rhee KY (2020) Significances of interphase conductivity and tunneling resistance on the conductivity of carbon nanotubes nanocomposites. Polym Compos 41(2):748–75610.1002/pc.25405 ↗
21. Zare Y, Rhee KY (2021) Micromechanics simulation of electrical conductivity for carbon-nanotube-filled polymer system by adjusting Ouali model. Eur Phys J Plus 136(8):85210.1140/epjp/s13360-021-01782-5 ↗
22. Zare Y, Rhim SS, Rhee KY (2021) Development of jang-yin model for effectual conductivity of nanocomposite systems by simple equations for the resistances of carbon nanotubes, interphase and tunneling section. Eur Phys J Plus 136(7):1–1510.1140/epjp/s13360-021-01417-9 ↗
23. Clingerman ML, King JA, Schulz KH, Meyers JD (2002) Evaluation of electrical conductivity models for conductive polymer composites. J Appl Polym Sci 83(6):1341–135610.1002/app.10014 ↗
24. Chang L, Friedrich K, Ye L, Toro P (2009) Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites. J Mater Sci 44(15):4003–4012. https://doi.org/10.1007/s10853-009-3551-310.1007/s10853-009-3551-3 ↗
25. Kara S, Arda E, Dolastir F, Pekcan Ö (2010) Electrical and optical percolations of polystyrene latex–multiwalled carbon nanotube composites. J Colloid Interface Sci 344(2):395–40110.1016/j.jcis.2009.12.056 ↗
26. Kehl K, Morsi K (2021) Reactive processing and properties of nickel aluminide–carbon nanotube composites. J Mater Sci 56(35):19501–19511. https://doi.org/10.1007/s10853-021-06462-410.1007/s10853-021-06462-4 ↗
27. Chen J, Akono A-T (2021) Influence of multi-walled carbon nanotubes on the fracture response and phase distribution of metakaolin-based potassium geopolymers. J Mater Sci 56(35):19403–19424. https://doi.org/10.1007/s10853-021-06547-010.1007/s10853-021-06547-0 ↗
28. Jyoti J, Singh BP (2021) A review on 3D graphene–carbon nanotube hybrid polymer nanocomposites. J Mater Sci 56(31):17411–17456. https://doi.org/10.1007/s10853-021-06547-010.1007/s10853-021-06547-0 ↗
29. Murugesan R, Haldorai Y, Sibi L, Sureshkumar R (2021) Ibrutinib conjugated surface-functionalized multiwalled carbon nanotubes and its biopolymer composites for targeting prostate carcinoma. J Mater Sci 56(33):18684–18696. https://doi.org/10.1007/s10853-021-06559-w10.1007/s10853-021-06559-w ↗
30. Zare Y, Rhee KY (2019) The effective conductivity of polymer carbon nanotubes (CNT) nanocomposites. J Phys Chem Solids 131:15–2110.1016/j.jpcs.2019.03.006 ↗
31. Kim S, Zare Y, Garmabi H, Rhee KY (2018) Variations of tunneling properties in poly (lactic acid)(PLA)/poly (ethylene oxide)(PEO)/carbon nanotubes (CNT) nanocomposites during hydrolytic degradation. Sens Actuators, A 274:28–3610.1016/j.sna.2018.03.004 ↗
32. Razavi R, Zare Y, Rhee KY (2017) A two-step model for the tunneling conductivity of polymer carbon nanotube nanocomposites assuming the conduction of interphase regions. RSC Adv 7(79):50225–5023310.1039/C7RA08214B ↗
33. Haghgoo M, Ansari R, Hassanzadeh-Aghdam M, Nankali M (2019) Analytical formulation for electrical conductivity and percolation threshold of epoxy multiscale nanocomposites reinforced with chopped carbon fibers and wavy carbon nanotubes considering tunneling resistivity. Compos A Appl Sci Manuf 126:10561610.1016/j.compositesa.2019.105616 ↗
34. Ryvkina N, Tchmutin I, Vilčáková J, Pelíšková M, Sáha P (2005) The deformation behavior of conductivity in composites where charge carrier transport is by tunneling: theoretical modeling and experimental results. Synth Met 148(2):141–14610.1016/j.synthmet.2004.09.028 ↗
35. Fang C, Zhang J, Chen X, Weng GJ (2019) A monte carlo model with equipotential approximation and tunneling resistance for the electrical conductivity of carbon nanotube polymer composites. Carbon 146:125–13810.1016/j.carbon.2019.01.098 ↗
36. Zare Y (2016) Effects of imperfect interfacial adhesion between polymer and nanoparticles on the tensile modulus of clay/polymer nanocomposites. Appl Clay Sci 129:65–7010.1016/j.clay.2016.05.002 ↗
37. Zare Y (2016) Modeling the yield strength of polymer nanocomposites based upon nanoparticle agglomeration and polymer–filler interphase. J Colloid Interface Sci 467:165–16910.1016/j.jcis.2016.01.022 ↗
38. Zare Y, Rhee KY, Park S-J (2019) A modeling methodology to investigate the effect of interfacial adhesion on the yield strength of MMT reinforced nanocomposites. J Ind Eng Chem 69:331–33710.1016/j.jiec.2018.09.039 ↗
39. Zare Y (2016) Study on interfacial properties in polymer blend ternary nanocomposites: role of nanofiller content. Comput Mater Sci 111:334–33810.1016/j.commatsci.2015.09.053 ↗
40. Baek K, Shin H, Cho M (2021) Multiscale modeling of mechanical behaviors of Nano-SiC/epoxy nanocomposites with modified interphase model: effect of nanoparticle clustering. Compos Sci Technol 203:10857210.1016/j.compscitech.2020.108572 ↗
41. Power AJ, Remediakis IN, Harmandaris V (2021) Interface and interphase in polymer nanocomposites with bare and core-shell gold nanoparticles. Polymers 13(4):54110.3390/polym13040541 ↗
42. Zare Y, Rhee KY (2017) Dependence of Z parameter for tensile strength of multi-layered interphase in polymer nanocomposites to material and interphase properties. Nanoscale Res Lett 12(1):1–710.1186/s11671-017-1830-5 ↗
43. Zare Y (2015) Estimation of material and interfacial/interphase properties in clay/polymer nanocomposites by yield strength data. Appl Clay Sci 115:61–6610.1016/j.clay.2015.07.021 ↗
44. Zare Y, Garmabi H (2015) A developed model to assume the interphase properties in a ternary polymer nanocomposite reinforced with two nanofillers. Compos B Eng 75:29–3510.1016/j.compositesb.2015.01.031 ↗
45. Zare Y (2015) Assumption of interphase properties in classical Christensen–Lo model for Young’s modulus of polymer nanocomposites reinforced with spherical nanoparticles. RSC Adv 5(116):95532–9553810.1039/C5RA19330C ↗
46. Zare Y, Garmabi H (2014) Attempts to simulate the modulus of polymer/carbon nanotube nanocomposites and future trends. Polym Rev 54(3):377–40010.1080/15583724.2013.870574 ↗
47. Taheri SS, Fakhrabadi MMS (2022) Interphase effects on elastic properties of polymer nanocomposites reinforced by carbon nanocones. Comput Mater Sci 201:11091010.1016/j.commatsci.2021.110910 ↗
48. Liu Z, Moore JA, Liu WK (2016) An extended micromechanics method for probing interphase properties in polymer nanocomposites. J Mech Phys Solids 95:663–68010.1016/j.jmps.2016.05.002 ↗
49. Peng W, Rhim S, Zare Y, Rhee KY (2019) Effect of “Z” factor for strength of interphase layers on the tensile strength of polymer nanocomposites. Polym Compos 40(3):1117–112210.1002/pc.24813 ↗
50. Shin H, Yang S, Choi J, Chang S, Cho M (2015) Effect of interphase percolation on mechanical behavior of nanoparticle-reinforced polymer nanocomposite with filler agglomeration: a multiscale approach. Chem Phys Lett 635:80–8510.1016/j.cplett.2015.06.054 ↗
51. Balberg I, Azulay D, Toker D, Millo O (2004) Percolation and tunneling in composite materials. Int J Mod Phys B 18(15):2091–212110.1142/S0217979204025336 ↗
52. Zare Y, Rhee KY (2019) Tensile strength prediction of carbon nanotube reinforced composites by expansion of cross-orthogonal skeleton structure. Compos B Eng 161:601–60710.1016/j.compositesb.2019.01.001 ↗
53. Zare Y, Rhee KY (2020) Development of conventional paul model for tensile modulus of polymer carbon nanotube nanocomposites after percolation threshold by filler network density. JOM 72(12):4323–432910.1007/s11837-020-04398-9 ↗
54. Zare Y, Rhee KY (2020) Modeling the effects of filler network and interfacial shear strength on the mechanical properties of carbon nanotube-reinforced nanocomposites. JOM 72(6):2184–219010.1007/s11837-020-04083-x ↗
55. Deng F, Zheng Q-S (2008) An analytical model of effective electrical conductivity of carbon nanotube composites. Appl Phys Lett 92(7):07190210.1063/1.2857468 ↗
56. Li J, Kim J-K (2007) Percolation threshold of conducting polymer composites containing 3D randomly distributed graphite nanoplatelets. Compos Sci Technol 67(10):2114–212010.1016/j.compscitech.2006.11.010 ↗
57. Yanovsky YG, Kozlov G, Karnet YN (2013) Fractal description of significant nano-effects in polymer composites with nanosized fillers. Aggregation, phase interaction, and reinforcement. Phys Mesomech 16(1):9–2210.1134/S1029959913010025 ↗
58. Feng C, Jiang L (2013) Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites. Compos A Appl Sci Manuf 47:143–14910.1016/j.compositesa.2012.12.008 ↗
59. Messina E, Leone N, Foti A, Di Marco G, Riccucci C, Di Carlo G et al (2016) Double-wall nanotubes and graphene nanoplatelets for hybrid conductive adhesives with enhanced thermal and electrical conductivity. ACS Appl Mater Interfaces 8(35):23244–2325910.1021/acsami.6b06145 ↗
60. Taherian R (2016) Experimental and analytical model for the electrical conductivity of polymer-based nanocomposites. Compos Sci Technol 123:17–3110.1016/j.compscitech.2015.11.029 ↗
61. Lu X, Yvonnet J, Detrez F, Bai J (2017) Multiscale modeling of nonlinear electric conductivity in graphene-reinforced nanocomposites taking into account tunnelling effect. J Comput Phys 337:116–13110.1016/j.jcp.2017.01.063 ↗
62. Wang Y, Shan JW, Weng GJ (2015) Percolation threshold and electrical conductivity of graphene-based nanocomposites with filler agglomeration and interfacial tunneling. J Appl Phys 118(6):06510110.1063/1.4928293 ↗
63. Xu D, Wang Q, Feng D, Liu P (2020) Facile fabrication of multifunctional poly (ethylene-co-octene)/carbon nanotube foams based on tunable conductive network. Ind Eng Chem Res 59(5):1934–194310.1021/acs.iecr.9b06163 ↗
64. Gao C, Zhang S, Wang F, Wen B, Han C, Ding Y et al (2014) Graphene networks with low percolation threshold in ABS nanocomposites: selective localization and electrical and rheological properties. ACS Appl Mater Interfaces 6(15):12252–1226010.1021/am501843s ↗
65. Goumri M, Lucas B, Ratier B, Baitoul M (2016) Electrical and optical properties of reduced graphene oxide and multi-walled carbon nanotubes based nanocomposites: a comparative study. Opt Mater 60:105–11310.1016/j.optmat.2016.07.010 ↗
66. Zhang H-B, Zheng W-G, Yan Q, Yang Y, Wang J-W, Lu Z-H et al (2010) Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding. Polymer 51(5):1191–119610.1016/j.polymer.2010.01.027 ↗