journal article·2022-08

Effect of force ratio on creep-fatigue crack growth (CFCG) of P91 steel

Chitresh Chandra, G. R. Kiranchand, Challa Krishna Teja, B. Srinivasa Rao, M. Nani Babu, N. Narasaiah

Journal of Materials Science· Volume 57· Issue 30
Publisher page

Abstract

Components operating at elevated temperature are often subjected to conjoint action of cyclic and static loading, rendering crack growth due to creep–fatigue interaction. It is a significant concern during the design and service life of the components made of P91 steel, which finds widespread use in conventional power plants. Creep fatigue crack growth (CFCG) tests have been performed on C(T) specimens with force ratios ranging from 0.1 to 0.8 at a temperature of 600 °C with a dwell period of 60 s. The CFCG results have been presented in terms of stress intensity factor range (ΔK), (Ct)avg, C* and (Ct)SSC parameters. The variation in crack growth rate with ΔK, (Ct)avg, (Ct)SSC and C* at different force ratios has been described. In the da/dN versus ∆K plot, a point of inflection is observed, where the crack growth rate was minimum for each force ratio, which resulted in a hook-like portion, corresponding to about 17% of the total life cycle of the sample. It can be understood from the plots of (da/dt)avg versus (Ct)avg that, the (Ct)avg values differ substantially at lower crack growth rates for different force ratios but tend to merge together at higher crack growth rates. Fractographic examination was performed on the fracture surface by dividing into 3 equidistant parts (i.e., A, B & C) of total CFCG portion. Crack growth in the ‘A’ region occupies a majority (60–90%) of the total life-cycle of the sample, and the time spent for growth in the A regime goes on increasing with increase in force ratio, whereas the time spent for crack growth in B regime goes on decreasing. The sample was then subjected to EDAX analysis to chart out the oxidation profile of the fracture surface as a function of time of exposure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Material Properties and Failure Mechanisms · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Saxena A (1993) Fracture mechanics approaches for characterizing creep-fatigue crack growth. JSME Int J Ser A Mech Mater Eng 36(1):1–20. https://doi.org/10.1299/jsmea1993.36.1_110.1299/jsmea1993.36.1_1 ↗
2. Narasimhachary SB, Saxena A (2013) Crack growth behavior of 9Cr− 1Mo (P91) steel under creep–fatigue conditions. Int J Fatigue 56:106–113. https://doi.org/10.1016/j.ijfatigue.2013.07.00610.1016/j.ijfatigue.2013.07.006 ↗
3. Pandey C, Mahapatra MM, Kumar P, Saini N (2018) Some studies on P91 steel and their weldments. J Alloy Compd 743:332–364. https://doi.org/10.1016/j.jallcom.2018.01.12010.1016/j.jallcom.2018.01.120 ↗
4. Swindeman, R. W., Santella, M. L., Maziasz, P. J., Roberts, B. W., and Coleman, K. (2004). Issues in replacing Cr–Mo steels and stainless steels with 9Cr–1Mo–V steel. International Journal of Pressure Vessels and Piping, 81(6), 507–512.https://doi.org/10.1016/j.ijpvp.2003.12.00910.1016/j.ijpvp.2003.12.009 ↗
5. Bassi F, Foletti S, Lo Conte A (2015) Creep fatigue crack growth and fracture mechanisms of T/P91 power plant steel. Mater High Temp 32(3):250–255. https://doi.org/10.1179/0960340914Z.0000000006510.1179/0960340914Z.00000000065 ↗
6. Mehmanparast A, Davies CM, Nikbin KM (2011) Evaluation of the testing and analysis methods in ASTM E2760–10 creep-fatigue crack growth testing standard for a range of steels. J ASTM Int 8(10):1–1810.1520/JAI103602 ↗
7. ASTM International (2019) Standard test method for creep-fatigue crack growth testing. ASTM, E. 2760–19e1
8. Tang Z, Jing H, Xu L, Zhao L, Han Y, Xiao B, Li H (2018) Creep-fatigue crack growth behavior of G115 steel under different hold time conditions. Int J Fatigue 116:572–583. https://doi.org/10.1016/j.ijfatigue.2018.07.01010.1016/j.ijfatigue.2018.07.010 ↗
9. ASTM International (2015) Standard test methods for measurements of fatigue crack growth rates. ASTM E647–15
10. ASTMSTP905 SV (1986) Creep crack growth under non-steady-state conditions. In: Fracture mechanics: seventeenth volume: Seventeenth National Symposium on Fracture Mechanics on Fracture Mechanics sponsored ASTM Committee E-24 on Fracture Testing, Albany, New York, 7–9 August 1984 (p. 185). Astm Intl.10.1520/STP17396S ↗
11. Bassani JL, McClintock FA (1981) Creep relaxation of stress around a crack tip. Int J Solids Struct 17(5):479–49210.1016/0020-7683(81)90055-X ↗
12. Bassani JL, Hawk DE, Wu FH (1988) Crack growth in small-scale creep. ASTM International10.1520/STP26771S ↗
13. Riedel H (1983) Crack-tip stress fields and crack growth under creep-fatigue conditions. In: Elastic-plastic fracture: second symposium, Volume I—inelastic crack analysis. ASTM International10.1520/STP37312S ↗
14. Gieseke B, Saxena A (1989) Correlation of creep-fatigue crack growth rates using crack-tip parameters. In: Proceedings of the 7th international conference on fracture (ICF7), pp 189–196. Pergamon. https://doi.org/10.1016/B978-0-08-034341-9.50029-210.1016/B978-0-08-034341-9.50029-2 ↗
15. Grover PS, Saxena A (1999) Modelling the effect of creep-fatigue interaction on crack growth. Fatigue Fract Eng Mater Struct 22(2):111–12210.1046/j.1460-2695.1999.00144.x ↗
16. Tang Z, Jing H, Xu L, Chi D, Zhao L, Han Y et al (2019) Crack growth behavior, fracture mechanism, and microstructural evolution of G115 steel under creep–fatigue loading conditions. Int J Mech Sci 161:105037. https://doi.org/10.1016/j.ijmecsci.2019.10503710.1016/j.ijmecsci.2019.105037 ↗
17. Adefris N, Saxena A, McDowell DL (1996) Creep-fatigue crack growth behavior in 1Cr-1Mo-0.25 V steels. Part I estimation of crack tip parameters. Fatigue Fract Eng Mater Struct 19(4):387–398. https://doi.org/10.1111/j.1460-2695.1996.tb00976.x10.1111/j.1460-2695.1996.tb00976.x ↗
18. Kumar VGMD, German MD, Shih CF (1981) Engineering approach for elastic-plastic fracture analysis (No. EPRI-NP--1931). General Electric Co. (Report)10.2172/6068291 ↗
19. Saxena A (2015) Creep and creep–fatigue crack growth. Int J Fract 191(1):31–5110.1007/s10704-015-9994-4 ↗
20. Narasimha Chary SB (2013) Crack Growth behavior under creep-fatigue conditions using compact and double edge notch tension-compression specimens. (Thesis)
21. Saxena A, Ernst HA, Landes JD (1983) Creep crack growth behavior in 316 stainless steel at 594° C (1100° F). Int J Fract 23(4):245–257. https://doi.org/10.1007/BF0002069310.1007/BF00020693 ↗
22. Yoon KB, Saxena A, Liaw PK (1993) Characterization of creep-fatigue crack growth behavior under trapezoidal waveshape using C t-parameter. Int J Fract 59(2):95–114. https://doi.org/10.1007/BF0001238510.1007/BF00012385 ↗
23. Saxena A, Gieseke B (1987) Transients in elevated temperature crack growth.[1 Cr-1Mo-0. 25V] (No. DOE/ER/45257–2; CONF-8710123–1). Georgia Inst. of Tech., Atlanta (USA). Fracture and Fatigue Research Lab
24. Ohji K, Kubo S (1990) Crack growth behavior and fractographs under creep-fatigue conditions including the near threshold regime. Fractography, Publication of the Society of the Material Science, Japan, Elsevier Applied Sciences, vol 105
25. Gieseke BG (1990) Mechanics and mechanisms of creep-fatigue crack growth in Cu-1 wt% Sb (Doctoral dissertation, Georgia Institute of Technology). http://hdl.handle.net/1853/19982
26. Chaswal V, Sasikala G, Ray SK, Mannan SL, Raj B (2005) Fatigue crack growth mechanism in aged 9Cr–1Mo steel: threshold and Paris regimes. Mater Sci Eng, A 395(1–2):251–264. https://doi.org/10.1016/j.msea.2004.12.02610.1016/j.msea.2004.12.026 ↗
27. Grover PS, Saxena A (1995) Characterization of creep-fatigue crack growth behavior in 2.25 Cr-1 Mo steel using (C t) avg. Int J Fract 73(4):273–28610.1007/BF00027270 ↗