Ultrahigh electrostrains of lead-free (Ba,Ca)(Ti,Zr)O3 piezoelectric ceramics via defect engineering
Source abstract
Abstract
Piezoelectric ceramics with large electric field-induced strain are of great importance for actuator applications. Unfortunately, BaTiO3-based ceramics usually exhibit relatively low strain in spite of their high large-signal piezoelectric coefficient d33*. In this study, an ultrahigh electrostrain with a value of ~ 0.242% (d33* = 1210 pm/V) at 2 kV/mm is achieved in MnO2-doped (Ba,Ca)(Ti,Zr)O3 (BCTZ)-based lead-free piezoelectric ceramics via defect engineering, which is ~ 82% higher than that of the undoped sample. Detailed structural analysis in combination with various electrical property measurements revealed that such an ultrahigh strain should be attributed to the internal bias field Ei as a result of defect dipoles between the acceptor Mn ions and the oxygen vacancies, accompanied by the recoverable strain and the enhanced asymmetry of strain vs. electric field curve. The results demonstrate that the studied compositions might have great potential for applications of lead-free actuator piezoelectric ceramics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Zhang ST, Kounga AB, Jo W, Jamin C, Seifert K, Granzow T, Rodel J, Damjanovic D (2009) High-strain lead-free antiferroelectric electrostrictors. Adv Mater 21:4716–4720. https://doi.org/10.1002/adma.20090151610.1002/adma.200901516 ↗
2. Hao JG, Shen B, Zhai JW, Liu CZ, Li XL, Gao XY (2013) Switching of morphotropic phase boundary and large strain response in lead-free ternary (Bi0.5Na0.5)TiO3-(K0.5Bi0.5)TiO3-(K0.5Na0.5)NbO3 system. J Appl Phys. https://doi.org/10.1063/1.479551110.1063/1.4795511 ↗
3. Shi J, Fan HQ, Liu X, Bell AJ (2014) Large electrostrictive strain in (Bi0.5Na0.5)TiO3-BaTiO3-(Sr0.7Bi0.2)TiO3 solid solutions. J Am Ceram Soc 97:848–853. https://doi.org/10.1111/jace.1271210.1111/jace.12712 ↗
4. Uiiah A, Ahn CW, Uiiah A, Kim W (2013) Large strain under a low electric field in lead-free bismuth-based piezoelectrics. Appl Phys Lett. https://doi.org/10.1063/1.481342010.1063/1.4813420 ↗
5. Liu WF, Ren XB (2009) Latge piezoelectric effect in Pb-free ceramics. Phys Rev Lett. https://doi.org/10.1103/PhysRevLett.103.25760210.1103/PhysRevLett.103.257602 ↗
6. Tian Y, Wei LL, Chao XL, Liu ZH, Yang ZP (2013) Phase transition behavior and large piezoelectricity near the morphotropic phase boundary of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics. J Am Ceram Soc 96:496–502. https://doi.org/10.1111/jace.1204910.1111/jace.12049 ↗
7. Wang D, Jiang ZH, Yang B, Zhang ST, Zhang MF, Guo FF, Cao WW (2014) Phase diagram and enhanced piezoelectric response of lead-free BaTiO3-CaTiO3-BaHfO3 system. J Am Ceram Soc 97:3244–3251. https://doi.org/10.1111/jace.1313710.1111/jace.13137 ↗
8. Zhao CL, Wu HJ, Li F, Cai YQ, Zhang Y, Song DS, Wu JG, Lyu X, Yin J, Xiao DQ, Zhu JG, Pennycook SJ (2018) Practical high piezoelectricity in barium titanate ceramics utilizing multiphase convergence with broad structural flexibility. J Am Chem Soc 140:15252–15260. https://doi.org/10.1021/jacs.8b0784410.1021/jacs.8b07844 ↗
9. Wang DW, Fan ZM, Rao GH, Wang G, Liu Y, Yuan CL, Ma T, Li DJ, Tan XL, Lu ZL, Feteira A, Liu SY, Zhou CR, Zhang SJ (2020) Ultrahigh piezoelectricity in lead-free piezoceramics by synergistic design. Nano Energy. https://doi.org/10.1016/j.nanoen.2020.10494410.1016/j.nanoen.2020.104944 ↗
10. Yang ZJ, Fu J, Xu YD, Zuo RZ (2021) Field-insensitive giant dynamic piezoelectric response and its structural origin in (Ba, Ca)(Ti, Zr)O3 tetragonal-orthorhombic phase-boundary ceramics. J Eur Ceram Soc 41:6441–6448. https://doi.org/10.1016/j.jeurceramsoc.2021.06.00410.1016/j.jeurceramsoc.2021.06.004 ↗
11. Zhao CL, Wu B, Thong HC, Wu JG (2018) Improved temperature stability and high piezoelectricity in lead-free barium titanate-based ceramics. J Eur Ceram Soc 38:5411–5419. https://doi.org/10.1016/j.jeurceramsoc.2018.08.00410.1016/j.jeurceramsoc.2018.08.004 ↗
12. Mayamae J, Vittayakorn W, Sukkhab U, Bongkarnc T, Muanghluae R, Vittayaakorn N (2017) High piezoelectric response in lead free 0.9BaTiO3-(0.1-x)CaTiO3-xBaSnO3 solid solution. Ceram Int 43:S121–S128. https://doi.org/10.1016/j.ceramint.2017.05.25210.1016/j.ceramint.2017.05.252 ↗
13. Chaiyo N, Cann DP, Vittayakorn N (2015) Phase transitions, ferroelectric, and piezoelectric properties of lead-free piezoelectric xBaZrO3-(0.25-x)CaTiO3-0.75BaTiO3 ceramics. J Mater Sci 50:6171–6179. https://doi.org/10.1007/s10853-015-9174-y10.1007/s10853-015-9174-y ↗
14. Wang XF, Chao XL, Liang PF, Wei LL, Yang ZP (2014) Polymorphic phase transition and enhanced electrical properties of (Ba0.91Ca0.09-xSrx)(Ti0.92Sn0.08)O3 lead-free ceramics. Ceram Int 40:9389–9394. https://doi.org/10.1016/j.ceramint.2014.02.00810.1016/j.ceramint.2014.02.008 ↗
15. Acosta M, Novak N, Jo W, Rodel J (2014) Relationship between electromechanical properties and phase diagram in the Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 lead-free piezoceramics. Acta Mater 80:48–55. https://doi.org/10.1016/j.actamat.2014.07.05810.1016/j.actamat.2014.07.058 ↗
16. Zhu LF, Zhang BP, Zhao L, Li JF (2014) High piezoelectricity of BaTiO3-CaTiO3-BaSnO3 lead-free ceramics. J Mater Chem C 2:4764–4771. https://doi.org/10.1039/C4TC00155A10.1039/C4TC00155A ↗
17. Zhu LF, Zhang BP, Zhao XK, Zhao L, Yao FZ, Han X, Zhou PF, Li JF (2013) Phase transition and high piezoelectricity in (Ba, Ca)(Ti1-xSnx)O3 lead-free ceramics. Appl Phys Lett. https://doi.org/10.1063/1.481873210.1063/1.4818732 ↗
18. Ehmke MC, Ehrlich SN, Blendell JE, Bowman KJ (2012) Phase coexistence and ferroelastic texture in high strain (1–x)Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 piezoceramics. Appl Phys Lett 111:124–110. https://doi.org/10.1063/1.473034210.1063/1.4730342 ↗
19. Zhang MH, Liu YX, Wang K, Koruza J, Schultaeiβ J (2020) Origin of high electromechanical properties in (K, Na)NbO3-based lead-free piezoelectric modified with BaZrO3. Phys Rev Mater. https://doi.org/10.1103/PhysRevMaterials.4.06440710.1103/PhysRevMaterials.4.064407 ↗
20. Fu J, Zuo RZ, Qi H, Chan TS (2019) Identifying the local defect structure in (Na0.5K0.5)NbO3: 1mol% CuO lead-free ceramics by X-ray absorption spectra. Appl Phys Lett 114:92–904. https://doi.org/10.1063/1.508839710.1063/1.5088397 ↗
21. Eichel RA, Erhart P, Traskelin P, Albe K, Kungl H, Hoffmann MJ (2008) Defect-dipole formation in copper-doped PbTiO3 ferroelectrics. Phys Rev Lett. https://doi.org/10.1103/PhysRevLett.100.09550410.1103/PhysRevLett.100.095504 ↗
22. Eichel RA (2007) Defect structure of oxide ferroelectrics-valence state, site of incorporation, mechanisms of charge compensation and internal bias fields. J Electroceram 19:9–21. https://doi.org/10.1007/s10832-007-9068-810.1007/s10832-007-9068-8 ↗
23. Zhang SJ, Lim JB, Lee HJ, Shrout TR (2009) Characterization of hard piezoelectric lead-free ceramics. IEEE Trans Ultrason Ferroelectr Freq Control 56:1523–1527. https://doi.org/10.1109/TUFFC.2009.121510.1109/TUFFC.2009.1215 ↗
24. Zho ZH, Lv YK, Dai YJ, Zhang SJ (2020) Ultrahigh electro-strain in acceptor-doped KNN lead-free piezoelectric ceramics via defect engineering. Acta Mater 200:35–41. https://doi.org/10.1016/j.actamat.2020.08.07310.1016/j.actamat.2020.08.073 ↗
25. Liu XM, Tan XL (2016) Giant strains in non-texture (Bi1/2Na1/2)TiO3-based lead-free ceramics. Adv Mater 28:574–578. https://doi.org/10.1002/adma.20150376810.1002/adma.201503768 ↗
26. Cao WP, Li WL, Feng Y, Bai T, Qiao YL, Hou YF, Zhang TD, Yu Y, Fei WD (2016) Defect dipole induced large recoverable strain and high energy-storage density in lead-free Na0.5Bi0.5TiO3-based systems. Appl Phys Lett 108:202902. https://doi.org/10.1063/1.495097410.1063/1.4950974 ↗
27. Fu J, Zuo RZ (2012) Polarization reversal and dynamic scaling of (Na0.5K0.5)NbO3 lead-free ferroelectric ceramics with double hysteresis-like loops. J Appl Phys 112:104114. https://doi.org/10.1063/1.476827010.1063/1.4768270 ↗
28. Ren XB (2004) Large electric-field-induced strain in ferroelectric crystals by point-defect-mediated reversible domain switching. Nat Mater 3:91–94. https://doi.org/10.1038/nmat105110.1038/nmat1051 ↗
29. Zhang LX, Chen W, Ren X (2004) Large recoverable electrostrain in Mn-doped (Ba, Sr)TiO3 ceramics. Appl Phys Lett 85:5658–5660. https://doi.org/10.1063/1.182939410.1063/1.1829394 ↗
30. Nageri M, Kumar V (2018) Manganese-doped BaTiO3 nanotube arrays for enhanced visible light photocatalytic applications. Mater Chem Phys 213:400–405. https://doi.org/10.1016/j.matchemphys.2018.04.00310.1016/j.matchemphys.2018.04.003 ↗
31. Ng YS, Alexander SM (1983) Structural studies of manganese stabilized lead-zirconate-titanate. Ferroelectrics 51:81–86. https://doi.org/10.1080/0015019830800905610.1080/00150198308009056 ↗
32. Yao FZ, Zhang MH, Wang K, Zhou JJ, Chen F, Xu B, Li F, Shen Y, Zhang QH, Gu L, Zhang XW, Li JF (2018) Refreshing piezoelectrics: distinctive role of manganese in lead-free perovskites. ACS Appl Mater Interfaces 10:37298–37306. https://doi.org/10.1021/acsami.8b1495810.1021/acsami.8b14958 ↗
33. Shannon RD (1976) Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Cryst A 32:751–767. https://doi.org/10.1107/S056773947600155110.1107/S0567739476001551 ↗
34. Damjanovic D, Biancoli A, Batooli L, Vahabzadeh A, Trodahl J (2012) Elastic, dielectric, and piezoelectric anomalies and Raman spectroscopy of 0.5Ba(Ti0.8Zr0.2)O3–0.5(Ba0.7Ca0.3)TiO3. Appl Phys Lett 100:192–907. https://doi.org/10.1063/1.471470310.1063/1.4714703 ↗
35. Venkata RE, Mahajan A, Graca MPF, Mendiratta SK, Monteiro JM, Valente MA (2013) Structure and ferroelectric studies of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 piezoelectric ceramics. Mater Res Bull 48:4395–4401. https://doi.org/10.1016/j.materresbull.2013.05.10810.1016/j.materresbull.2013.05.108 ↗
36. Pasha UM, Zheng H, Thakur OP, Feteira A, Whittle KR, Sinclair DC (2007) Reaney IM (2007) In situ Raman spectroscopy of A-site doped barium titanate. Appl Phys Lett. https://doi.org/10.1063/1.276888110.1063/1.2768881 ↗
37. Shi YJ, Dong XY, Zhao K, Yang WW, Zhu K, Hu R, Zeng HR, Shen B, Zhai JW (2021) Potential high-temperature piezoelectric ceramics with remarkable performances enhanced by the second-order Jahn-Teller effect. ACS Appl Mater Interfaces 13:14385–14393. https://doi.org/10.1021/acsami.1c0079010.1021/acsami.1c00790 ↗
38. Freeman CL, Dawson JA, Harding JH, Ben LB, Sinclair DC (2012) The influence of A-site rare earth ion size in controlling the Curie temperature of Ba1-xRexTi1-x/4O3. Adv Funct Mater 23:491–495. https://doi.org/10.1002/adfm.20120170510.1002/adfm.201201705 ↗
39. Sun HJ, Zhang Y, Liu XF, Liu Y, Chen W (2015) Effects of CuO additive on structure and electrical properties of low-temperature sintered Ba0.98Ca0.02Zr0.02Ti0.98O3 lead-free ceramics. Ceram Int 41:555–565. https://doi.org/10.1016/j.ceramint.2014.08.10410.1016/j.ceramint.2014.08.104 ↗
40. Sinclair DC, Attfield JP (1999) The influence of A-cation disorder on the Curie temperature of ferroelectric ATiO3 perovskties. Chem Commun. https://doi.org/10.1039/A903680F10.1039/A903680F ↗