Study on quenching sensitivity of an Al–Zn–Mg–Cu alloy containing trace amounts of Sc and Zr
Source abstract
Abstract
The quenching sensitivity of an Al–Zn–Mg–Cu alloy containing trace amounts of Sc and Zr is studied by interrupted quenching experiments. Electrical conductivity of the quenched samples and the hardness of the samples subjected to one-stage and two-stage aging, are measured to construct the time–temperature–transformation (TTT) curves and the time–temperature–property (TTP) curves. It is revealed that the quenching sensitivity of the alloy is mainly influenced by the precipitation of coarse η phases during slow quenching, which preferentially nucleate and grow at grain boundaries and at the Al3(Sc, Zr) dispersoids that are incoherent with the matrix. The quenching sensitivity increases with the size and quantity of the coarse η phases. The nose temperature is 290 °C for both TTT and TTP curves, where the phase transformation rate is the fastest and the quenching sensitivity is the highest. Compared to one-stage aged samples, two-stage aged samples exhibit lower quench sensitivity due to the reduced transformation rate from η′ phases to η phases after slow quenching. The quenching sensitive temperatures range from 206 to 358 °C for the one-stage aged samples and from 213 to 352 °C for the two-stage aged samples. Moreover, based on the simulated TTT and continuous cooling transformation curves, an optimized quenching process is proposed in the present work.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Wen K, Fan Y, Wang G, Jin L, Li X, Li Z, Zhang Y, Xiong B (2016) Aging behavior and precipitate characterization of a high Zn-containing Al–Zn–Mg–Cu alloy with various tempers. Mater Des 101:16–2310.1016/j.matdes.2016.03.150 ↗
2. Chung T-F, Yang Y-L, Huang B-M, Shi Z, Lin J, Ohmura T, Yang J-R (2018) Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy. Acta Mater 149:377–38710.1016/j.actamat.2018.02.045 ↗
3. Zhu Q, Cao L, Wu X, Zou Y, Couper MJ (2019) Effect of Ag on age-hardening response of Al-Zn-Mg-Cu alloys. Mater Sci Eng A 754:265–26810.1016/j.msea.2019.03.090 ↗
4. Rowolt C, Milkereit B, Springer A, Mihara-Narita M, Yoshida H, Yamashita K, Oldenburg K, Kessler O (2021) On the extraordinary low quench sensitivity of an AlZnMg alloy. J Mater Sci 56:20181–2019610.1007/s10853-021-06583-w ↗
5. Evancho JW, Staley JT (1974) Kinetics of precipitation in aluminum alloys during continuous cooling. Metall Trans 5:43–4710.1007/BF02642924 ↗
6. Dolan GP, Robinson JS (2004) Residual stress reduction in 7175–T73, 6061–T6 and 2017A–T4 aluminium alloys using quench factor analysis. J Mater Process Technol 153–154:346–35110.1016/j.jmatprotec.2004.04.065 ↗
7. Liu S, Zhong Q, Zhang Y, Liu W, Zhang X, Deng Y (2010) Investigation of quench sensitivity of high strength Al–Zn–Mg–Cu alloys by time-temperature-properties diagrams. Mater Des 31:3116–312010.1016/j.matdes.2009.12.038 ↗
8. Flynn RJ, Robinson JS (2004) The application of advances in quench factor analysis property prediction to the heat treatment of 7010 aluminium alloy. J Mater Process Technol 153–154:674–68010.1016/j.jmatprotec.2004.04.133 ↗
9. Lin L, Peng H, Zhao J (2021) Quench sensitivity of 7475 aluminum alloy using end-quenching technique and TTP diagrams. JOM 73:1135–114310.1007/s11837-020-04466-0 ↗
10. Ye J, Pan Q, Li H, Huang Z, Liu Y, Wang X, Li M (2019) Quench sensitivity of a 7A46 aluminum alloy. JOM 71:2054–206210.1007/s11837-019-03421-y ↗
11. Archambault P, Godard D (2000) High temperature precipitation kinetics and ttt curve of a 7xxx alloy by in-situ electrical resistivity measurements and differential calorimetry. Scripta Mater 42:675–68010.1016/S1359-6462(99)00419-4 ↗
12. Deng Y-L, Wan L, Zhang Y-Y, Zhang X-M (2011) Influence of Mg content on quench sensitivity of Al–Zn–Mg–Cu aluminum alloys. J Alloys Compd 509:4636–464210.1016/j.jallcom.2011.01.147 ↗
13. Lim ST, Yun SJ, Nam SW (2004) Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications. Mater Sci Eng A 371:82–9010.1016/S0921-5093(03)00653-1 ↗
14. Tang J, Yang Z, Liu S, Wang Q, Chen J, Chai W, Ye L (2019) Quench sensitivity of AA 7136 Alloy: contribution of grain structure and dispersoids. Metall Mater Trans A 50:4900–491210.1007/s11661-019-05397-5 ↗
15. Li C-B, Han S-Q, Liu S-D, Deng Y-L, Zhang X-M (2016) Grain structure effect on quench sensitivity of Al–Zn–Mg–Cu–Cr alloy. Trans Nonferrous Met Soc China 26:2276–228210.1016/S1003-6326(16)64319-4 ↗
16. Zheng Y-L, Li C-B, Liu S-D, Deng Y-L, Zhang X-M (2014) Effect of homogenization time on quench sensitivity of 7085 aluminum alloy. Trans Nonferrous Met Soc China 24:2275–228110.1016/S1003-6326(14)63344-6 ↗
17. Tang J-G, Chen H, Zhang X-M, Liu S-D, Liu W-J, Ouyang H, Li H-P (2012) Influence of quench-induced precipitation on aging behavior of Al–Zn–Mg–Cu alloy. Trans Nonferrous Met Soc China 22:1255–126310.1016/S1003-6326(11)61313-7 ↗
18. Nie B, Liu P, Zhou T (2016) Effect of compositions on the quenching sensitivity of 7050 and 7085 alloys. Mater Sci Eng A 667:106–11410.1016/j.msea.2016.04.095 ↗
19. Zhang X, Liu W, Liu S, Zhou M (2011) Effect of processing parameters on quench sensitivity of an AA7050 sheet. Mater Sci Eng A 528:795–80210.1016/j.msea.2010.07.033 ↗
20. Azarniya A, Taheri AK, Taheri KK (2019) Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective. J Alloys Compd 781:945–98310.1016/j.jallcom.2018.11.286 ↗
21. Fang HC, Chao H, Chen KH (2014) Effect of Zr, Er and Cr additions on microstructures and properties of Al–Zn–Mg–Cu alloys. Mater Sci Eng A 610:10–1610.1016/j.msea.2014.05.021 ↗
22. Peng G, Chen K, Fang H, Chen S (2012) Effect of Cr and Yb additions on microstructure and properties of low copper Al–Zn–Mg–Cu–Zr alloy. Mater Des 36:279–28310.1016/j.matdes.2011.11.040 ↗
23. Røyset J, Ryum N (2005) Scandium in aluminium alloys. Int Mater Rev 50:19–4410.1179/174328005X14311 ↗
24. Kodetová V, Vlach M, Smola B, Kekule T, Daniš S, Kudrnová H, Málek J (2018) Effect of cold rolling on precipitation processes in Al–Zn–Mg(–Sc–Zr) Alloy. Acta Phys Pol A 134:631–63510.12693/APhysPolA.134.631 ↗
25. Li B, Pan Q, Huang X, Yin Z (2014) Microstructures and properties of Al–Zn–Mg–Mn alloy with trace amounts of Sc and Zr. Mater Sci Eng A 616:219–22810.1016/j.msea.2014.08.024 ↗
26. Teng GB, Liu CY, Ma ZY, Zhou WB, Wei LL, Chen Y, Li J, Mo YF (2018) Effects of minor Sc addition on the microstructure and mechanical properties of 7055 Al alloy during aging. Mater Sci Eng A 713:61–6610.1016/j.msea.2017.12.067 ↗
27. Tiryakioğlu M, Robinson JS, Eason PD (2014) On the quench sensitivity of 7010 aluminum alloy forgings in the overaged condition. Mater Sci Eng A 618:22–2810.1016/j.msea.2014.09.002 ↗
28. Gjønnes J, Simensen CJ (1970) An electron microscope investigation of the microstructure in an aluminium-zinc-magnesium alloy. Acta Metall 18:881–89010.1016/0001-6160(70)90016-7 ↗
29. Sha G, Cerezo A (2004) Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050). Acta Mater 52:4503–451610.1016/j.actamat.2004.06.025 ↗
30. Liu JZ, Chen JH, Yang XB, Ren S, Wu CL, Xu HY, Zou J (2010) Revisiting the precipitation sequence in Al–Zn–Mg-based alloys by high-resolution transmission electron microscopy. Scripta Mater 63:1061–106410.1016/j.scriptamat.2010.08.001 ↗
31. Berg LK, Gjønnes J, Hansen V, Li XZ, Knutson-Wedel M, Waterloo G, Schryvers D, Wallenberg LR (2001) GP-zones in Al–Zn–Mg alloys and their role in artificial aging. Acta Mater 49:3443–345110.1016/S1359-6454(01)00251-8 ↗
32. Salazar-Guapuriche MA, Zhao YY, Pitman A, Greene A (2006) Correlation of strength with hardness and electrical conductivity for aluminium alloy 7010. Mater Sci Forum 519–521:853–85810.4028/www.scientific.net/MSF.519-521.853 ↗
33. Fuller C, Seidman D (2005) Temporal evolution of the nanostructure of Al(Sc, Zr) alloys: part II-coarsening of Al3(Sc1-xZrx) precipitates. Acta Mater 53:5415–542810.1016/j.actamat.2005.08.015 ↗
34. Liu K, Chen XG (2015) Development of Al–Mn–Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening. Mater Des 84:340–35010.1016/j.matdes.2015.06.140 ↗
35. Xie P, Chen K, Chen S, Ye S, Jiao H, Huang L (2019) Study on quenching sensitivity of 7097 aluminum alloy. Mater Res Express 7:01650510.1088/2053-1591/ab5987 ↗
36. Shang BC, Yin ZM, Wang G, Liu B, Huang ZQ (2011) Investigation of quench sensitivity and transformation kinetics during isothermal treatment in 6082 aluminum alloy. Mater Des 32:3818–382210.1016/j.matdes.2011.03.016 ↗
37. Schöbel M, Pongratz P, Degischer HP (2012) Coherency loss of Al3(Sc, Zr) precipitates by deformation of an Al–Zn–Mg alloy. Acta Mater 60:4247–425410.1016/j.actamat.2012.04.011 ↗
38. Karnesky RA, Meng L, Dunand DC (2007) Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids. Acta Mater 55:1299–130810.1016/j.actamat.2006.10.004 ↗
39. Beigei Kheradmand A, Mirdamadi S, Nategh S (2019) Modified age hardening of Al–Zn–Mg–Cu with minor amount of scandium and zirconium. Mater Res Express. https://doi.org/10.1088/2053-1591/ab0ade10.1088/2053-1591/ab0ade ↗
40. Jones MJ, Humphreys FJ (2003) Interaction of recrystallization and precipitation: the effect of Al3Sc on the recrystallization behaviour of deformed aluminium. Acta Mater 51:2149–215910.1016/S1359-6454(03)00002-8 ↗
41. Deng Y, Yin Z, Zhao K, Duan J, He Z (2012) Effects of Sc and Zr microalloying additions on the microstructure and mechanical properties of new Al–Zn–Mg alloys. J Alloys Compd 530:71–8010.1016/j.jallcom.2012.03.108 ↗
42. Dorward R, Beerntsen DJ (1995) Grain structure and quench-rate effects on strength and toughness of AA7050 Al–Zn–Mg–Cu–Zr alloy plate. Metall Mater Trans A 26:2481–248410.1007/BF02671263 ↗