Effect of mechanical polishing of aluminum alloy surfaces on wetting and droplet evaporation at constant and cyclically varying pressure in the chamber
Source abstract
Abstract
Improving the mechanical polishing of engineering surfaces in terms of the wetting and droplet evaporation theories is important for increasing the efficiency of modern equipment. Depending on the function of engineering surfaces, the mechanical polishing allows changing the wetting, as well as the liquid droplet evaporation rates and modes. However, the prediction of the processes occurring at the liquid/gas/solid contact line becomes more complicated after modification of metal surfaces, as well as under changing the environmental conditions. This work focuses on the study of wetting and evaporation of liquid droplets from polished aluminum alloy surfaces at constant and cyclically varying pressure. Wetting and droplet evaporation are key processes in equipment of the thermal power industry, in particular, operating at constant and cyclically varying high pressure: water-water steam generators, water vapor separators, droplet catchers, etc. Therefore, we investigated droplet wetting and evaporation modes after mechanical processes of surfaces, including polishing by tumbling, satin finishing, grinding and polishing by disks and pastes. We determined the condition when polishing of aluminum alloy surfaces by these methods does not affect the wettability by liquid droplets. Moreover, we established the effect of constant and cyclically varying high pressure on the droplet evaporation rate and evaporation modes. The pressure was found not to affect the characteristics of water droplet evaporation under conditions of periodically varied pressure in the chamber from the atmospheric (0.1 MPa) to high (0.5, 1.0, 1.5, and 2.0 MPa) values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Nanomaterials and Printing Technologies · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Kuznetsov GV, Orlova EG, Feoktistov DV et al (2020) Droplet spreading and wettability of abrasive processed aluminum alloy surfaces. Met Mater Int 26:46–55. https://doi.org/10.1007/s12540-019-00310-610.1007/s12540-019-00310-6 ↗
2. Tong XT (2011) Liquid cooling devices and their materials selection. In: Itoh K, Lee T, Sakurai T, Sansen WMC, Schmitt-Landsiedel D (eds) Advanced materials for thermal management of electronic packaging. Springer, New York, pp 421–47310.1007/978-1-4419-7759-5_10 ↗
3. Domantovskiy AG, Yemel’yanenko AM, Boynovich LB (2019) Teksturirovannyye materialy s ekstremal’nym smachivaniyem dlya sbora vody iz aerozoley. Doklady akademii Nauk, Fizicheskaya khimiya 489:478–482 ([In Russian])
4. Yoosefan F, Ashrafi A, Monirvaghefi SM (2020) Characterization of Co–Cr–Fe–Mn–Ni high-entropy alloy thin films synthesized by pulse electrodeposition: part 2: effect of pulse electrodeposition parameters on the wettability and corrosion resistance. Met Mater Int 27:106–117. https://doi.org/10.1007/s12540-019-00584-w10.1007/s12540-019-00584-w ↗
5. Lian Z, Xu J, Yu P et al (2019) Oil-repellent and corrosion resistance properties of superhydrophobic and superoleophobic aluminum alloy surfaces based on nanosecond laser-textured treatment. Met Mater Int 26:1603–1610. https://doi.org/10.1007/s12540-019-00382-410.1007/s12540-019-00382-4 ↗
6. Yin X, Yu S, Bi X et al (2021) Preparation of durable, self-cleaning and photocatalytic superhydrophobic Ni3S2 coating on 304 stainless steel surface against contaminations. J Mater Sci 56:6719–6731. https://doi.org/10.1007/s10853-020-05717-w10.1007/s10853-020-05717-w ↗
7. Ren S, Chen Y, Xu K et al (2021) Maintenance of superhydrophobic concrete for high compressive strength. J Mater Sci 56:4588–4598. https://doi.org/10.1007/s10853-020-05558-710.1007/s10853-020-05558-7 ↗
8. Guo Y, Zhang X, Wang X et al (2020) Wetting and tribological properties of superhydrophobic aluminum surfaces with different water adhesion. J Mater Sci 55:11658–11668. https://doi.org/10.1007/s10853-020-04733-010.1007/s10853-020-04733-0 ↗
9. Erfanmanesh M, Bakhshi SR, Pakmanesh MR, Barekat M (2020) Preparation and improved friction and wear performance of the nano-MoSi2 coating on Ni substrate by plasma spraying. Met Mater Int 27:1531–1539. https://doi.org/10.1007/s12540-019-00580-010.1007/s12540-019-00580-0 ↗
10. Cihanoğlu G, Ebil Ö (2021) Robust fluorinated siloxane copolymers via initiated chemical vapor deposition for corrosion protection. J Mater Sci 56:11970–11987. https://doi.org/10.1007/s10853-021-06060-410.1007/s10853-021-06060-4 ↗
11. Liu Z, Pan N, Tao H, Lin J (2021) Temperature-dependent wetting characteristics of micro–nano-structured metal surface formed by femtosecond laser. J Mater Sci 56:3525–3534. https://doi.org/10.1007/s10853-020-05457-x10.1007/s10853-020-05457-x ↗
12. Zhang X, Zhao J, Mo J et al (2019) Fabrication of superhydrophobic aluminum surface by droplet etching and chemical modification. Colloids Surf A Physicochem Eng Asp 567:205–212. https://doi.org/10.1016/j.colsurfa.2019.01.04610.1016/j.colsurfa.2019.01.046 ↗
13. Xia Z, Fang F, Ahearne E, Tao M (2020) Advances in polishing of optical freeform surfaces: a review. J Mater Process Tech 286:1–17. https://doi.org/10.1016/j.jmatprotec.2020.11682810.1016/j.jmatprotec.2020.116828 ↗
14. Zang D, Tarafdar S, Tarasevich YY et al (2019) Evaporation of a droplet: from physics to applications. Phys Rep 804:1–56. https://doi.org/10.1016/j.physrep.2019.01.00810.1016/j.physrep.2019.01.008 ↗
15. Kabov OA, Gatapova EY, Semenov AA et al (2018) Experimental and numerical studies of evaporation of a sessile water drop on a heated conductive substrate. Interfac Phenom Heat Transf 6:421–435. https://doi.org/10.1615/InterfacPhenomHeatTransfer.201903086210.1615/InterfacPhenomHeatTransfer.2019030862 ↗
16. Semenov AA, Feoktistov DV, Zaitsev DV et al (2015) Experimental investigation of liquid drop evaporation on a heated solid surface. Thermophys Aeromech 22:771–774. https://doi.org/10.1134/S086986431506013X10.1134/S086986431506013X ↗
17. Ye S, Zhang L, Wu CM et al (2020) Experimental investigation of evaporation dynamic of sessile droplets in pure vapor environment with low pressures. Int J Therm Sci 149:106213. https://doi.org/10.1016/j.ijthermalsci.2019.10621310.1016/j.ijthermalsci.2019.106213 ↗
18. Lecoq L, Flick D, Laguerre O (2017) Study of the water evaporation rate on stainless steel plate in controlled conditions. Int J Therm Sci 111:450–462. https://doi.org/10.1016/j.ijthermalsci.2016.09.03010.1016/j.ijthermalsci.2016.09.030 ↗
19. Kuznetsov GV, Feoktistov DV, Orlova EG, Batishcheva KA (2016) Regimes of water droplet evaporation on copper substrates. Colloid J 78:319–324. https://doi.org/10.1134/S1061933X1603008X10.1134/S1061933X1603008X ↗
20. Misyura SY, Kuznetsov GV, Feoktistov DV et al (2019) The influence of the surface microtexture on wettability properties and drop evaporation. Surf Coatings Technol 375:458–467. https://doi.org/10.1016/j.surfcoat.2019.07.05810.1016/j.surfcoat.2019.07.058 ↗
21. Gatapova EY, Kabov OA, Ajaev VS (2019) Evaporation and interface dynamics in microregion on heated substrate of non-uniform wettability. Int J Heat Mass Transf 142:118355. https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.00510.1016/j.ijheatmasstransfer.2019.07.005 ↗
22. Kuznetsov GV, Feoktistov DV, Orlova EG et al (2019) Unification of the textures formed on aluminum after laser treatment. Appl Surf Sci 469:974–982. https://doi.org/10.1016/j.apsusc.2018.11.04610.1016/j.apsusc.2018.11.046 ↗
23. Zhang Y, Chen H, Liu D, Deng H (2020) High efficient polishing of sliced 4H-SiC (0001) by molten KOH etching. Appl Surf Sci 525:146532. https://doi.org/10.1016/j.apsusc.2020.14653210.1016/j.apsusc.2020.146532 ↗
24. Li Y, Zhang Z, Guan Y (2020) Thermodynamics analysis and rapid solidification of laser polished Inconel 718 by selective laser melting. Appl Surf Sci 511:145423. https://doi.org/10.1016/j.apsusc.2020.14542310.1016/j.apsusc.2020.145423 ↗
25. Deng T, Xie F, Li J et al (2020) Effect of overlapped adjacent tracks on surface morphology in plasma beam polishing of austenitic stainless steel. Appl Surf Sci 512:145739. https://doi.org/10.1016/j.apsusc.2020.14573910.1016/j.apsusc.2020.145739 ↗
26. Temmler A, Liu D, Luo J, Poprawe R (2020) Influence of pulse duration and pulse frequency on micro-roughness for laser micro polishing (LµP) of stainless steel AISI 410. Appl Surf Sci 510:145272. https://doi.org/10.1016/j.apsusc.2020.14527210.1016/j.apsusc.2020.145272 ↗
27. Mower TM, Long MJ (2016) Mechanical behavior of additive manufactured, powder-bed laser-fused materials. Mater Sci Eng A 651:198–213. https://doi.org/10.1016/j.msea.2015.10.06810.1016/j.msea.2015.10.068 ↗
28. Bagehorn S, Wehr J, Maier HJ (2017) Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts. Int J Fatigue 102:135–142. https://doi.org/10.1016/j.ijfatigue.2017.05.00810.1016/j.ijfatigue.2017.05.008 ↗
29. Villa F, Marengo M, De Coninck J (2018) A new model to predict the influence of surface temperature on contact angle. Sci Rep 8:1–10. https://doi.org/10.1038/s41598-018-24828-810.1038/s41598-018-24828-8 ↗
30. Milne AJB, Amirfazli A (2012) The cassie equation: how it is meant to be used. Adv Colloid Interface Sci 170:48–55. https://doi.org/10.1016/j.cis.2011.12.00110.1016/j.cis.2011.12.001 ↗
31. Hejazi V, Moghadam AD, Rohatgi P, Nosonovsky M (2014) Beyond Wenzel and Cassie-Baxter: second-order effects on the wetting of rough surfaces. Langmuir 30:9423–9429. https://doi.org/10.1021/la502143v10.1021/la502143v ↗
32. Zahiri B, Sow PK, Kung CH, Mérida W (2017) Understanding the wettability of rough surfaces using simultaneous optical and electrochemical analysis of sessile droplets. J Colloid Interface Sci 501:34–44. https://doi.org/10.1016/j.jcis.2017.04.04310.1016/j.jcis.2017.04.043 ↗
33. Zhang C, Zhu X, Zhou L (2011) Morphology tunable pinning force and evaporation modes of water droplets on PDMS spherical cap micron-arrays. Chem Phys Lett 508:134–138. https://doi.org/10.1016/j.cplett.2011.04.04110.1016/j.cplett.2011.04.041 ↗
34. Kuznetsov GV, Feoktistov DV, Orlova EG et al (2018) Evaporation modes of LiBr, CaCl2, LiCl, NaCl aqueous salt solution droplets on aluminum surface. Int J Heat Mass Transf 126:161–168. https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.04010.1016/j.ijheatmasstransfer.2018.05.040 ↗
35. Zaitsev DV, Batishcheva KA, Kuznetsov GV, Orlova EG (2020) Prediction of water droplet behavior on aluminum alloy surfaces modified by nanosecond laser pulses. Surf Coatings Technol 399:126206. https://doi.org/10.1016/j.surfcoat.2020.12620610.1016/j.surfcoat.2020.126206 ↗
36. Misyura SY (2018) Evaporation and heat and mass transfer of a sessile drop of aqueous salt solution on heated wall. Int J Heat Mass Transf 116:667–674. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.01810.1016/j.ijheatmasstransfer.2017.09.018 ↗
37. Kelly-Zion PL, Batra J, Pursell CJ (2013) Correlation for the convective and diffusive evaporation of a sessile drop. Int J Heat Mass Transf 64:278–285. https://doi.org/10.1016/j.ijheatmasstransfer.2013.04.05110.1016/j.ijheatmasstransfer.2013.04.051 ↗
38. Gatapova EY, Semenov AA, Zaitsev DV, Kabov OA (2014) Evaporation of a sessile water drop on a heated surface with controlled wettability. Colloids Surfaces A Physicochem Eng Asp 441:776–785. https://doi.org/10.1016/j.colsurfa.2013.05.04610.1016/j.colsurfa.2013.05.046 ↗
39. Sobac B, Brutin D (2015) Pure diffusion. In: Brutin D (ed) Droplet wetting and evaporation. Elsevier Inc., United States, pp 101–11410.1016/B978-0-12-800722-8.00008-4 ↗
40. Carle F, Brutin D (2015) Convection. In: Brutin D (ed) Droplet wetting and evaporation. Elsevier Inc., United States, pp 115–12810.1016/B978-0-12-800722-8.00009-6 ↗
41. Kelly-Zion PL, Pursell CJ, Wassom GN et al (2018) Correlation for sessile drop evaporation over a wide range of drop volatilities, ambient gases and pressures. Int J Heat Mass Transf 118:355–367. https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.12910.1016/j.ijheatmasstransfer.2017.10.129 ↗
42. Narayanaswamy V (2014) A review of thermal and humidity management needs and feasible solutions for next generation subsea electric systems. Underw Technol 32:129–143. https://doi.org/10.3723/ut.32.12910.3723/ut.32.129 ↗
43. Kiper I, Fulcrand R, Pirat C et al (2015) Sessile drop evaporation on (super)hydrophobic surfaces: effect of low pressure on the contact line dynamics. Colloids Surfaces A Physicochem Eng Asp 482:617–623. https://doi.org/10.1016/j.colsurfa.2015.07.00210.1016/j.colsurfa.2015.07.002 ↗
44. Kubochkin NS, Ivanova NA (2019) Droplet shape and wetting behavior under the influence of cyclically changing humidity. Langmuir 35:5054–5059. https://doi.org/10.1021/acs.langmuir.9b0015910.1021/acs.langmuir.9b00159 ↗
45. Owens DK, Wendt RC (1969) Estimation of the surface free energy of polymers. J Appl Polym Sci 13:1741–1747. https://doi.org/10.1002/app.1969.07013081510.1002/app.1969.070130815 ↗
46. Kaelble DH (1970) Dispersion-polar surface tension properties of organic solids. J Adhes 2:66–81. https://doi.org/10.1080/002184670854458210.1080/0021846708544582 ↗
47. Tryznowski M, Izdebska-podsiad J, Zuzanna Ż (2017) Wettability and surface free energy of NIPU coatings based on bis (2, 3- dihydroxypropyl ) ether dicarbonate. Prog Org Coatings 109:55–60. https://doi.org/10.1016/j.porgcoat.2017.04.01110.1016/j.porgcoat.2017.04.011 ↗
48. Yu DI, Kwak HJ, Doh SW et al (2015) Wetting and evaporation phenomena of water droplets on textured surfaces. Int J Heat Mass Transf 90:191–200. https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.04610.1016/j.ijheatmasstransfer.2015.06.046 ↗
49. Furuta T, Sakai M, Isobe T, Nakajima A (2009) Evaporation behavior of microliter- and sub-nanoliter-scale water droplets on two different fluoroalkylsilane coatings. Langmuir 25:11998–12001. https://doi.org/10.1021/la902848s10.1021/la902848s ↗
50. Soolaman DM, Yu HZ (2005) Water microdroplets on molecularly tailored surfaces: correlation between wetting hysteresis and evaporation mode switching. J Phys Chem B 109:17967–17973. https://doi.org/10.1021/jp051182s10.1021/jp051182s ↗
51. Erbil HY (2012) Evaporation of pure liquid sessile and spherical suspended drops: a review. Adv Colloid Interface Sci 170:67–86. https://doi.org/10.1016/j.cis.2011.12.00610.1016/j.cis.2011.12.006 ↗
52. Wang D, Cornelius CJ (2016) Ionomer thermodynamic interrelationships associated with wettability, surface energy, swelling, and water transport. Eur Polym J 85:126–138. https://doi.org/10.1016/j.eurpolymj.2016.10.02410.1016/j.eurpolymj.2016.10.024 ↗