journal article·2020-09

Evolution of cellular morphology in pure materials

Yaw Delali Bensah

Journal of Materials Science· Volume 55· Issue 25
Publisher page

Abstract

The evolution of cellular morphology during interfacial instability for liquid–solid transition for pure unary material systems is studied using the maximum entropy production (generation) rate principle (MEPR) for steady-state directional solidification. This approach is dependent on a quantity called maximum entropy production rate density which inherently contains key solidification parameters that governs cellular evolution for liquid–solid transformation. The maximum entropy production rate density is computationally measured from the solid–liquid interface in diffuse form and considers steady-state solidification at low velocities for both near and far from equilibrium conditions. The results are presented in mathematical expressions for morphological instability that corresponding to the evolution of a cellular morphology which emanates from the solid–liquid interface. The model is formulated to evaluate the solid–liquid interface thickness, the solidification velocity, grain boundary energy, and the size of the cellular morphological at instability. The results are tested with a number of pure single element materials at different temperature gradients which compare well with available experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Material Dynamics and Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Ben-Jacob E, Garik P (1990) The formation of pattern in non-equilibrium growth. Nature 343:523–53010.1038/343523a0 ↗
2. Young T (1805) An essay on the cohesion of fluids. Phil Trans R Soc 95:65–8710.1098/rstl.1805.0005 ↗
3. Laplace PS (1966) Trait´e de m´ecanique c´eleste; suppl´ements au Livre X. In Euvres, Vol. 4, Paris, Gauthier-Villars, 1805 and 1806: English translation by N. Bowditch (1839); reprinted by Chelsea, New York
4. Gauss CF (1839) Principia generalia theoriae figurae fluidorum. Comment Soc Regiae Scient Gottingensis 7:1830
5. Wilson HA (1900) On the velocity of solidification and viscosity of super-cooled liquids. Philos Mag 50:23810.1080/14786440009463908 ↗
6. Frenkel J (1932) Note on a relation between the speed of crystallization and viscosity. Phys Z Sowjetunion 1:498
7. Becker R, Doring W (1935) The kinetic treatment of nuclear formation in supersaturated vapors. Ann Phys (Leipzig) 24:719–75210.1002/andp.19354160806 ↗
8. Burton WK, Cabrera NT, Frank FC (1950) The growth of crystals and the equilibrium structure of their surfaces. Phil Trans A 243:299
9. Lamorgese AG, Molin D, Mauri R (2011) Phase field approach to multiphase flow modeling. Milan J Math 79:597–64210.1007/s00032-011-0171-6 ↗
10. Rayleigh L (1892) On the theory of surface forces II. Compressible fluids. Philos Mag 33:209–22010.1080/14786449208621456 ↗
11. van der Waals JD (1893) The thermodynamic theory of capillarity under the hypothesis of a continuous variation of density. Verhandel. Konink. Akad. Weten 1(8):56. Translated by J. S. Rowlinson, J. Stat Phys. 20(2):197–244, 197910.1007/BF01011514 ↗
12. Landau L (1937) On the theory of phase transitions. Zh. Eksp. Teor. Fiz. 7: 19-32. Translated by Ukrainian Physico-Technical Institute, Ukr. J. Phys 53:25–35, 2008
13. Cahn J (1960) Theory of crystal growth and interface motion in crystalline materials. Acta Metall 8:55410.1016/0001-6160(60)90110-3 ↗
14. Sekhar JA (2011) The description of morphologically stable regimes for steady state solidification based on the maximum entropy production rate postulate. J Mater Sci 46:6172–619010.1007/s10853-011-5688-0 ↗
15. Emmerich H (2003) The diffuse interfac approach in materials science. Springer, Berlin
16. Tiller WA, Jackson KA, Rutter JW (1953) The redistribution of solute atoms during the solidification of metals. Acta Metallurgy 1:428–43710.1016/0001-6160(53)90126-6 ↗
17. Mullins WW, Sekerka RF (1964) Stability of a Planar Interface During Solidification of a Dilute Binary Alloy. J Appl Phys 35(2):444–45110.1063/1.1713333 ↗
18. Inatomi Y, Ashida M, Sakata K, Okutani T (2014) Simultaneous measurement of temperature and concentration during faceted cellular array growth under microgravity. W J Eng 11:41–4810.1260/1708-5284.11.1.41 ↗
19. De Cheveigne S, Guthmann C, Kurowski P (1988) Directional solidification of metallic alloys: The nature of the bifurcation from planar to cellular interface. J Cryst Growth 92:616–62810.1016/0022-0248(88)90046-2 ↗
20. Bensah YD, Sekhar JA (2014) Morphstulate. Curr Opin Chem Eng 2:1–10
21. Bensah YD, Sekhar JA (2020) Solidification morphology and bifurcation predictions with the maximum entropy production rate model. Entropy 22(40):1–13
22. Ziman JM (1956) The general variational principle of transport theory. Can J Phys 35:125610.1139/p56-139 ↗
23. Ziegler H (1983) An introduction to thermomechanics. North- Holland, Amsterdam
24. Martyushev LM, Seleznev VD, Kuznetsova IE (2000) Application of the Principle of Maximum Entropy production to the analysis of the morphological stability of a growing crystal. Zh Éksp Teor Fiz 118:149
25. Kirkaldy JS (1985) Entropy criteria applied to pattern selection in systems with free boundaries. Metall Trans A 16A:1781–179610.1007/BF02670366 ↗
26. Kirkaldy JS (1992) Spontaneous evolution of spatiotemporal patterns in materials. Rep Prog Phys 55:723–79510.1088/0034-4885/55/6/002 ↗
27. Wang H, Liu F, Zhai H, Wang K (2012) Application of the maximal entropy production principle to rapid solidification: a sharp interface model. Acta Mater 60:1444–145410.1016/j.actamat.2011.11.038 ↗
28. Martyushev LM, Seleznev VD (2006) Maximum entropy production principle in physics, chemistry and biology. Phys Rep 426:1–4510.1016/j.physrep.2005.12.001 ↗
29. Bensah YD (2018) Morphological linstability at the solid-liquid interface by the maximum entropy production rate principle. Can J Phy 96:1314–132010.1139/cjp-2017-0887 ↗
30. Li HP, Sekhar JA (2009) Belousov–Zhabotinsky dissipative reactions in Ti–B and Ni–Al alloy systems. Acta Mater 57:543010.1016/j.actamat.2009.07.039 ↗
31. Sekhar JA, Li HP, Dey GK (2010) Decay-dissipative Belousov-Zhabotinsky nanobands and nanoparticles in NiAl. Acta Mater 58(3):1056–107310.1016/j.actamat.2009.10.022 ↗
32. Dewar RC (2003) Information theoretic explanation of maximum entropy production, the fluctuation theorem and self-organized criticality in non-equilibrium stationary states. J Phys A 36:631–66410.1088/0305-4470/36/3/303 ↗
33. Dewar RC (2005) Maximum entropy production and the fluctuation theorem. J Phys A: Math Gen 38:L371–L38110.1088/0305-4470/38/21/L01 ↗
34. Paltridge GW (1979) Climate and thermodynamic systems of maximum dissipation. Nature 279:63010.1038/279630a0 ↗
35. Ford IJ, Lee TL (2001) Entropy production and destruction in models of material evaporation. J Phys D: Appl Phys 34:41310.1088/0022-3727/34/3/327 ↗
36. Martyushev LM (2007) Some interesting consequences of the maximum entropy production principle. JETP 104(4):651–65410.1134/S1063776107040152 ↗
37. Martyushev LM (2010) The maximum entropy production principle:two basic questions. Phil Trans R Soc B 365:1333–133410.1098/rstb.2009.0295 ↗
38. Kleidon A, Lorenz R (2004) Non-equilibrium Thermodynamics and the Production of Entropy in Life, Earth, and Beyond. Springer, Heidelberg
39. Kleidon A (2009) Nonequilibrium thermodynamics and maximum entropy production in the earth system. Naturwissenschaften 96:65310.1007/s00114-009-0509-x ↗
40. Bensah YD, Li HP, Sekhar JA (2012) The Sgen rate maximization postulate: Applications to process-path analysis for solidification and micropyretic synthesis. Key Eng Mater 521:79–8610.4028/www.scientific.net/KEM.521.79 ↗
41. Frank M, Drikakis D (2018) Thermodynamics at Solid-Liquid Interfaces. Entropy 20:2–11
42. Zener C (1946) Kinetics of the decomposition of austenite. Trans Metall Soc AIME 167:550–595
43. Temkin DE (1960) Growth velocity of a needle crystal in a super cooled melt. Dokl Akad Nauk SSSR 132:1307
44. Bolling GF, Tiller WA (1961) Growth from the melt. III. dendritic growth. J Appl Phys 32:2587–260510.1063/1.1728359 ↗
45. Kaufman JH, Melroy OR, Dimino GM (1989) Information-theoretic study of pattern formation: rate of entropy production of random fractals. Phys Rev A 39(3):1420–142810.1103/PhysRevA.39.1420 ↗
46. Struchtrup H, Weiss W (1998) Maximum of the local entropy becomes a minimum in stationary states. Phys Rev Lett 80(23):5048–505110.1103/PhysRevLett.80.5048 ↗
47. Bensah YD (2015) Interfacial solid-liquid diffuseness and instability by the maximum entropy production rate postulate. University of Cincinnati, Cincinnati
48. Trivedi R (1999) Lectures on the theory of phase transformations, 2nd edn. In: Aaronson HI (ed) TMS AIME, New York, pp. 135–164
49. Mullins WW (1957) Theory of thermal grooving. J Appl Phys 28:333–33910.1063/1.1722742 ↗
50. Bergeon N, Tourret D, Chen L, Debierre JM, Guerin R, Ramirez A, Billia B, Karma A, Trivedi R (2013) Spatiotemporal dynamics of oscillatory cellular patterns in three-dimensional. Phys Rev Lett 110(226102):1–5
51. Rohrer GS (2011) Grain boundary energy anisotropy: a review. J Mater Sci 46:5881–589510.1007/s10853-011-5677-3 ↗
52. Woodruff DP (1973) The solid-liquid interface. Cambrifge University Press, London
53. Hill A (1990) Entropy production as the selection rule between different growth morphologies. Nature 348:426–42810.1038/348426a0 ↗
54. Haji-Akbari A et al (2009) Disordered, quasicrystalline and crystalline phases of densely packed tetrahedra. Nature 462:773–77810.1038/nature08641 ↗