journal article·2020-09

Fabrication of Al–Cu–Fe particles containing quasicrystalline i-phase by oxidation of ω-phase in air

Jhong-Ren Huang, Hisanori Yamane, An-Pang Tsai

Journal of Materials Science· Volume 55· Issue 26
Publisher page

Abstract

Alumina-layer-coated spherical particles composed of ω-phase (Al70Cu20Fe10) and icosahedral quasicrystal phase (i-phase, Al64Cu24Fe12) in the Al–Cu–Fe system were fabricated by heating spherical particles of the ω-phase at 700 °C for 200–400 h in air. Differential thermal analysis and transmission electron microscopy observations suggested that formation of a liquid phase with a composition close to θ-phase (Al2Cu) was formed near the surface of the particles, and an i-phase domain grew in the interior of the particles through the liquid. When the ω-phase particles were heated at 730 °C, which was above the melting point of the ω-phase, for 96–400 h in air, oxide-layer-coated granular particles containing the i-phase as the main phase and λ-phase (Al13Fe4) and θ-phase as minor phases were obtained. The surface oxide layer acted as a micro-crucible that could hold liquid and prevent cohesion to other particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Mineralogy and Gemology Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Shechtman D, Blech I, Gratias D, Cahn JW (1984) Metallic phase with long-range orientational order and no translational symmetry. Phys Rev Lett 53(20):1951–1953. https://doi.org/10.1103/PhysRevLett.53.195110.1103/PhysRevLett.53.1951 ↗
2. Tsai A-P, Inoue A, Masumoto T (1987) A stable quasicrystal in Al-Cu-Fe system. Jpn J Appl Phys, Part 2 26(9):L1505–L1507. https://doi.org/10.1143/jjap.26.l150510.1143/jjap.26.l1505 ↗
3. Huttunen-Saarivirta E (2004) Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a review. J Alloys Compd 363(1):154–178. https://doi.org/10.1016/S0925-8388(03)00445-610.1016/S0925-8388(03)00445-6 ↗
4. Dubois JM (2012) Properties- and applications of quasicrystals and complex metallic alloys. Chem Soc Rev 41(20):6760–6777. https://doi.org/10.1039/c2cs35110b10.1039/c2cs35110b ↗
5. Tsai AP, Aoki K, Inoue A, Masumoto T (1993) Synthesis of stable quasicrystalline particle-dispersed Al base composite alloys. J Mater Res 8(1):5–7. https://doi.org/10.1017/S088429140012026610.1017/S0884291400120266 ↗
6. Bown MG, Brown PJ (1956) The structure of FeCu2Al7 and T(CoCuAl). Acta Crystallogr A 9(11):911–914. https://doi.org/10.1107/S0365110X5600257610.1107/S0365110X56002576 ↗
7. Fleury E, Lee SM, Choi G, Kim WT, Kim DH (2001) Comparison of Al-Cu-Fe quasicrystalline particle reinforced Al composites fabricated by conventional casting and extrusion. J Mater Sci 36(4):963–970. https://doi.org/10.1023/a:100487582403910.1023/a:1004875824039 ↗
8. Kenzari S, Weisbecker P, Geandier G, Fournee V, Dubois JM (2006) Influence of oxidation of i-AlCuFeB particles on the formation of Al-based composites prepared by solid state sintering. Philos Mag 86(3–5):287–292. https://doi.org/10.1080/1478643050025180610.1080/14786430500251806 ↗
9. Kenzari S, Weisbecker P, Curulla M, Geandier G, Fournee V, Dubois JM (2008) Formation and properties of Al composites reinforced by quasicrystalline AlCuFeB particles. Philos Mag 88(5):755–766. https://doi.org/10.1080/1478643080195525310.1080/14786430801955253 ↗
10. Wehner BI, Meinhardt J, Köster U, Alves H, Eliaz N, Eliezer D (1997) Oxidation and hydrogenation of quasicrystals. Mater Sci Eng, A 226–228:1008–1011. https://doi.org/10.1016/S0921-5093(96)10848-010.1016/S0921-5093(96)10848-0 ↗
11. Wehner BI, Köster U, Rüdiger A, Pieper C, Sordelet DJ (2000) Oxidation of Al–Cu–Fe and Al–Pd–Mn quasicrystals. Mater Sci Eng, A 294–296:830–833. https://doi.org/10.1016/S0921-5093(00)01060-110.1016/S0921-5093(00)01060-1 ↗
12. Wehner BI, Köster U (2000) Microstructural evolution of alumina layers on an Al–Cu–Fe quasicrystal during high-temperature oxidation. Oxid Met 54(5):445–456. https://doi.org/10.1023/a:100463850138710.1023/a:1004638501387 ↗
13. Weisbecker P, Bonhomme G, Bott G, Dubois JM (2005) The oxidation at 500°C of AlCuFe quasicrystalline powders: a X-ray diffraction study. J Non-Cryst Solids 351(19–20):1630–1638. https://doi.org/10.1016/j.jnoncrysol.2005.04.05310.1016/j.jnoncrysol.2005.04.053 ↗
14. Rouxel D, Gil-Gavatz M, Pigeat P, Weber B (2005) Oxidation kinetics of the quasicrystalline i-AlCuFe phase compared with that of crystalline ω-AlCuFe and pure aluminum. J Non-Cryst Solids 351(10):802–809. https://doi.org/10.1016/j.jnoncrysol.2005.02.01310.1016/j.jnoncrysol.2005.02.013 ↗
15. Rouxel D, Pigeat P (2006) Surface oxidation and thin film preparation of AlCuFe quasicrystals. Prog Surf Sci 81(10):488–514. https://doi.org/10.1016/j.progsurf.2006.07.00210.1016/j.progsurf.2006.07.002 ↗
16. Pinhero PJ, Anderegg JW, Sordelet DJ, Besser MF, Thiel PA (2009) Surface oxidation of Al-Cu-Fe alloys: a comparison of quasicrystalline and crystalline phases. Philos Mag B 79(1):91–110. https://doi.org/10.1080/1364281990820678410.1080/13642819908206784 ↗
17. Polozhentsev OE, Bryleva MA, Kravtsova AN, Kochkina VK, Soldatov AV (2015) Icosahedral phase formation in an Al-Cu-Fe quasicrystal. B Russ Acad Sci Phys 79(9):1173–1179. https://doi.org/10.3103/s106287381501025610.3103/s1062873815010256 ↗
18. Salimon A, Korsunsky A, Shelekhov E, Sviridova T (2000) Preparation and analysis of quasicrystalline phases by high energy ball milling and X-ray diffraction. Mater Sci Forum 321:676–681. https://doi.org/10.4028/www.scientific.net/MSF.321-324.67610.4028/www.scientific.net/MSF.321-324.676 ↗
19. Srinivas V, Barua P, Murty BS (2000) On icosahedral phase formation in mechanically alloyed Al70Cu20Fe10. Mater Sci Eng 294–296:65–67. https://doi.org/10.1016/S0921-5093(00)01200-410.1016/S0921-5093(00)01200-4 ↗
20. Barua P, Srinivas V, Murty BS (2000) Synthesis of quasicrystalline phase by mechanical alloying of Al70Cu20Fe10. Philos Mag A 80(5):1207–1217. https://doi.org/10.1080/0141861000821211110.1080/01418610008212111 ↗
21. Barua P, Murty BS, Mathur BK, Srinivas V (2002) Nanostructured icosahedral phase formation in Al70Cu20Fe10 by mechanical alloying: comprehensive study. J Appl Phys 91(8):5353–5359. https://doi.org/10.1063/1.146420610.1063/1.1464206 ↗
22. Yin S, Xie Z, Bian Q, He B, Pan Z, Sun Z, Wei Z, Qian L, Wei S (2008) Formation of AlCuFe icosahedral quasicrystal by mechanical alloying: XAFS and XRD studies. J Alloys Compd 455(1):314–321. https://doi.org/10.1016/j.jallcom.2007.01.05810.1016/j.jallcom.2007.01.058 ↗
23. Barua P, Srinivas V, Dhabal S, Ghosh TB (2002) X-ray photoelectron spectroscopic studies on nanoquasicrystalline powders of Al70Cu20Fe10 obtained by mechanical alloying. J Mater Res 17(8):1892–1895. https://doi.org/10.1557/JMR.2002.028010.1557/JMR.2002.0280 ↗
24. Srinivas V, Barua P, Ghosh TB, Murty BS (2004) Oxidation behavior of Al–Cu–Fe nanoquasicrystal powders. J Non-Cryst Solids 334–335:540–543. https://doi.org/10.1016/j.jnoncrysol.2003.12.03710.1016/j.jnoncrysol.2003.12.037 ↗
25. Göğebakan M, Avar B (2011) Structural evolutions of the mechanically alloyed Al70Cu20Fe10 powders. Indian Academy of Sciences 77(4):735–747. https://doi.org/10.1007/s12043-011-0091-610.1007/s12043-011-0091-6 ↗
26. PDF files. The International Centre for Diffraction Data (ICDD). 12 Campus Blvd, Newtown Square, PA 19073, USA
27. Zhang L, Schneider J, Lück R (2005) Phase transformations and phase stability of the AlCuFe alloys with low-Fe content. Intermetallics 13(11):1195–1206. https://doi.org/10.1016/j.intermet.2005.03.00410.1016/j.intermet.2005.03.004 ↗
28. Zhou R-S, Snyder RL (1991) Structures and transformation mechanisms of the η, γ, and θ transition aluminas. Acta Crystallogr Sect B: Struct Sci 47(5):617–630. https://doi.org/10.1107/S010876819100271910.1107/S0108768191002719 ↗
29. Lewis J, Schwarzenbach D, Flack HD (1982) Electric field gradients and charge density in corundum, α-Al2O3. Acta Crystallogr Sect A: Found Crystallogr 38(5):733–739. https://doi.org/10.1107/S056773948200147810.1107/S0567739482001478 ↗
30. Zhang L, Lück R (2003) Phase diagram of the Al–Cu–Fe quasicrystal-forming alloy system III. Isothermal sections Z Metallkd 94(2):108–115. https://doi.org/10.3139/146.03010810.3139/146.030108 ↗
31. El Kabir T, Joulain A, Gauthier V, Dubois S, Bonneville J, Bertheau D (2008) Hot isostatic pressing synthesis and mechanical properties of Al/Al–Cu–Fe composite materials. J Mater Res 23(4):904–910. https://doi.org/10.1557/jmr.2008.011110.1557/jmr.2008.0111 ↗
32. Laplanche G, Joulain A, Bonneville J, Schaller R, El Kabir T (2010) Microstructures and mechanical properties of Al-base composite materials reinforced by Al–Cu–Fe particles. J Alloys Compd 493(1):453–460. https://doi.org/10.1016/j.jallcom.2009.12.12410.1016/j.jallcom.2009.12.124 ↗
33. Yadav TP, Mukhopadhyay NK (2018) Quasicrystal: a low-frictional novel material. Curr Opin Chem Eng 19:163–169. https://doi.org/10.1016/j.coche.2018.03.00510.1016/j.coche.2018.03.005 ↗
34. Dubois J-M, Belin-Ferré E (2015) Wetting and adhesion properties of quasicrystals and complex metallic alloys. Appl Adhes Sci 3(1):28. https://doi.org/10.1186/s40563-015-0046-010.1186/s40563-015-0046-0 ↗
35. Rivier N (1993) Non-stick quasicrystalline coatings. J Non-Cryst Solids 153–154:458–462. https://doi.org/10.1016/0022-3093(93)90395-E10.1016/0022-3093(93)90395-E ↗