journal article·2019-08

Crystal structure and grain formation mechanism of bismuth–indium particles generated by ultrasonic irradiation

Akio Furusawa, Kiyohiro Hine, Hidetoshi Kitaura, Yamato Hayashi, Hirotsugu Takizawa

Journal of Materials Science· Volume 54· Issue 16
Publisher page

Abstract

The miniaturization and high functionalization of electronic devices are driving the micronization of electronic components. In order to effectively microjoin electronic components, it is necessary to micronize the particles used in the soldering paste. In this study, we utilized an ultrasonic irradiation method to produce fine metal particles, and examined the influence of ultrasonic irradiation on the solidification process of the soldering materials. Bismuth–indium (Bi–45wt.%In) solder melted in a high-boiling-point solvent was exposed to ultrasonic irradiation to form droplets. By irradiating these droplets with ultrasonic waves during solidification, the amount of BiIn2 in the solid solder composition increased, while that of Bi3In5 decreased. In addition, submicron-sized agglomerations consisting of numerous small particles (~ 30 nm in diameter) were detected in the solvent; the In content of these clusters was ≥ 70 wt.%. It is thought that the amount of Bi3In5 generated decreased due to cavitation during solid–liquid phase coexistence, which caused the liquid-phase components with high In concentrations to separate from the droplets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermodynamic and Structural Properties of Metals and Alloys · Electronic Packaging and Soldering Technologies · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Kato T (1989) Recent development in production technology of alloy powders. J Jpn Inst Met 28:977–986
2. Harada K, Suga H (1990) Theoretical investigation on parameters of centrifugal atomization of metal powder. J Jpn Soc Powder Powder Metall 37:492–49910.2497/jjspm.37.492 ↗
3. Plookphol T, Wisutmethangoon S, Gonsrang S (2011) Influence of process parameters on SAC305 lead-free solder powder produced by centrifugal atomization. Powder Technol 214:506–51210.1016/j.powtec.2011.09.015 ↗
4. Shemyakina OA, Sheikhalieva ZI, Sheikhaliev SM (2010) Obtaining solder powders by centrifugal atomization of melt. Russ J Non-Ferr Met 51:250–25410.3103/S1067821210030107 ↗
5. Friedman H, Reich S, Popovitz-Biro R, von Huth P, Halevy I, Koltypin Y, Gedanken A, Porat Z (2013) Micro- and nano-spheres of low melting point metals and alloys formed by ultrasonic cavitation. Ultrason Sonochem 20:432–44410.1016/j.ultsonch.2012.08.009 ↗
6. Kumar VB, Kimmel G, Porat ZE, Gedanken A (2015) Formation of particles of bismuth-based binary alloys and intermetallic compounds by ultrasonic cavitation. New J Chem 39:5374–538110.1039/C5NJ00781J ↗
7. Kumar VB, Gedanken A, Kimmel G, Porat Z (2014) Ultrasonic cavitation of molten gallium: formation of micro- and nano-spheres. Ultrason Sonochem 21(3):1166–117310.1016/j.ultsonch.2013.11.004 ↗
8. Kumar VB, Koltypin Y, Gedanken A, Porat Z (2014) Ultrasonic cavitation of molten gallium in water: entrapment of organic molecules in gallium microspheres. J Mater Chem A 2(5):1309–131710.1039/C3TA13573J ↗
9. Furusawa A, Akiyama S, Sakai K, Hayashi Y, Takizawa H (2017) Synthesis of lead-free solder particles using high-speed centrifugal atomization. Mater Trans 58:1458–146210.2320/matertrans.M2017129 ↗
10. Liu ZK (2009) First-principles calculations and CALPHAD modeling of thermodynamics. J Phase Equilib Diffus 30:517–53410.1007/s11669-009-9570-6 ↗
11. Kago K, Suetsugu K, Hibino S, Ikari T, Furusawa A, Takano H, Horiuchi T, Ishida K, Sakaguchi T, Kikuchi S, Matsushige K (2004) Novel ultrasonic soldering technique for lead-free solders. Mater Trans 45:703–70910.2320/matertrans.45.703 ↗
12. Li J, Chen J, Wang H, Chen N, Wang Z, Guo L, Deepak FL (2018) In situ atomic-scale study of particle-mediated nucleation and growth in amorphous bismuth to nanocrystal phase transformation. Adv Sci 5(6):170099210.1002/advs.201700992 ↗
13. Sugasawa S, Uematsu S, Akiyama S (2011) Observation of microstructural deformation behavior in metals caused by cavitation impact. Jpn J Appl Phys 50:07HE0310.7567/JJAP.50.07HE03 ↗
14. Furusawa A, Hine K, Hayashi Y, Takizawa H (2019) Formation of particle of bismuth–indium alloys and particle diameter by ultrasonic cavitation. Ultrason Sonochem 50:322–33010.1016/j.ultsonch.2018.09.034 ↗