journal article·2016-09

Facile-low temperature route towards development of SiC-based coating on carbon nanotubes for improved oxidation resistance

Shivanand C. Galaveen, Mahesh K. Satam, Luv Gurnani, T. Venkateswaran, Amartya Mukhopadhyay

Journal of Materials Science· Volume 51· Issue 18
Publisher page

Abstract

Coating with silicon carbide is a preferred avenue for improving the oxidation resistance of carbon nanotubes. However, expensive and non-scalable techniques like vapor deposition are commonly used to develop such coatings. Against this backdrop, reported here is a facile, cost-effective and low temperature route, based on wet-chemical synthesis, for obtaining SiC-based coating on multi-walled carbon nanotubes (MWCNTs). The coating was achieved by dispersing surface-modified MWCNTs in silica sol (having optimized viscosity), followed by simultaneous reduction and ‘carburization’ of the silica (wetting MWCNTs) in the presence of Mg at 600 °C. X-ray diffraction and RAMAN spectroscopy confirmed the presence of β-SiC, while TEM observations revealed the development of uniform and thin coating (~3 nm thick) on undamaged MWCNTs. Thermo-gravimetric and differential thermal analyses up to 1500 °C in air confirmed significant improvement in oxidation resistance for the MWCNTs with SiC-based coating (just ~15 % mass loss; as against rapid mass loss of ~100 % for uncoated MWCNTs due to oxidation). Additionally, undamaged MWCNTs (with SiC-based coating) could be imaged in TEM after exposure in air at 1200 °C for longer duration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Diamond and Carbon-based Materials Research · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Curtin WA, Sheldon BW (2004) CNT-reinforced ceramics and metals. Mater Today 7:44–4910.1016/S1369-7021(04)00508-5 ↗
2. Thostenson ET, Ren Z, Chou TW (2001) Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol 61:1899–191210.1016/S0266-3538(01)00094-X ↗
3. Harris PJF (2004) Carbon nanotube composites. Int Mater Rev 49:31–4310.1179/095066004225010505 ↗
4. Calvert P (1999) Nanotube composites: a recipe for strength. Nature 399:210–21110.1038/20326 ↗
5. Wang X, Padture NP, Tanaka H (2004) Contact-damage-resistant ceramic/single-wall carbon nanotubes and ceramic/graphite composites. Nat Mater 3:539–54410.1038/nmat1161 ↗
6. Peigney A, Laurent C, Flahaut E, Rousset A (2000) Carbon nanotubes in novel ceramic matrix nanocomposites. Ceram Int 26:677–68310.1016/S0272-8842(00)00004-3 ↗
7. Mukhopadhyay A, Chu BTT, Green MLH, Todd RI (2010) Understanding the mechanical reinforcement of uniformly dispersed multiwalled carbon nanotubes in alumino-borosilicate glass ceramic. Acta Mater 58:2685–269710.1016/j.actamat.2010.01.001 ↗
8. Mukhopadhyay A, Otieno G, Chu BTT, Wallwork A, Green MLH, Todd RI (2011) Effects of uniformly dispersed carbon nanotube reinforcements on thermal and electrical properties of aluminoborosilicate glass–ceramic. Scripta Mater 65:408–401110.1016/j.scriptamat.2011.05.023 ↗
9. Otieno G, Koos A, Dillon F, Yahya NA, Dancer CEJ, Hughes GM, Grobert N, Todd RI (2015) Stiffness, strength and interwall sliding in aligned and continuous multi-walled carbon nanotube/glass composite microcantilevers. Acta Mater 100:118–12510.1016/j.actamat.2015.08.045 ↗
10. Xia Z, Riester L, CurtinWA LH, Sheldon BW, Liang J, Chang B, Xu JM (2004) Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites. Acta Mater 52:931–94410.1016/j.actamat.2003.10.050 ↗
11. Mylvaganam K, Zhang LC (2007) Ballistic resistance capacity of carbon nanotubes. Nanotechnology 18:47570110.1088/0957-4484/18/47/475701 ↗
12. Morisada Y, Miyamoto Y (2004) SiC-coated carbon nanotubes and their application as reinforcements for cemented carbides. Mater Sci Eng A 381:57–6110.1016/j.msea.2004.03.055 ↗
13. Park YS, Choi YC, Kim KS, Chung D-C, Bae DJ, An KH, Lim SC, Zhu XY, Lee YH (2001) High yield purification of multiwalled carbon nanotubes by selective oxidation during thermal annealing. Carbon 39:655–66110.1016/S0008-6223(00)00152-4 ↗
14. Ebbesen TW, Ajayan PM, Hiura H, Tanigaki K (1994) Role of sp3 structures in graphite and carbon nanotubes. Nature 367:148–15210.1038/367519a0 ↗
15. Taguchi T, Kibria AKMF, Shamoto S (2013) Morphology change of multi-walled carbon nanotubes with SiC coating by electron irradiation. J Phys Conf Ser 417:01203710.1088/1742-6596/417/1/012037 ↗
16. Manivannan R, Daniel A, Srikanth I, Kumar A, Sarkar R, Ghoshal P, Devi R (2010) Thermal stability of zirconia-coated multiwalled carbon nanotubes. Def Sci J 60:337–34210.14429/dsj.60.362 ↗
17. Seeger T, Redlich P, Grobert N, Terrones M, Walton DRM, Kroto HW, Rühle M (2001) SiOx-coating of carbon nanotubes at room temperature. Chem Phys Lett 339:41–4610.1016/S0009-2614(01)00256-1 ↗
18. Morisada Y, Maeda M, Shibayanagi T, Miyamoto Y (2004) Oxidation resistance of multiwalled carbon nanotubes coated with silicon carbide. J Am Ceram Soc 87:804–80810.1111/j.1551-2916.2004.00804.x ↗
19. Nayak GC, Rajasekar R, Das CK (2010) Effect of SiC coated MWCNTs on the thermal and mechanical properties of PEI/LCP blend. Compos A 41:1662–166710.1016/j.compositesa.2010.08.003 ↗
20. Gupta RK, Mishra R, Mukhopadhyay K, Tiwari RK, Ranjan A, Saxena AK (2009) A new technique for coating silicon carbide onto carbon nanotubes using a polycarbosilane precursor. Silicon 1:125–12910.1007/s12633-009-9016-0 ↗
21. Morisada Y, Miyamoto Y, Takaura Y, Hirota K, Tamari N (2007) Mechanical properties of SiC composites incorporating SiC-coated multi-walled carbon nanotubes. Int J Refract Met Hard Mater 25:322–32710.1016/j.ijrmhm.2006.08.005 ↗
22. So KP, Jeong JC, Park JG, Park HK, Choi YH, Noh DH, Keum DH, Jeong HY, Biswas C, Hong CH, Lee YH (2013) SiC formation on carbon nanotube surface for improving wettability with aluminum. Compos Sci Technol 74:6–1310.1016/j.compscitech.2012.09.014 ↗
23. Chen Y, Balani K, Agarwal A (2008) Analytical model to evaluate interface characteristics of carbon nanotubes reinforced aluminum oxide nanocomposites. Appl Phys Lett 92:01191610.1063/1.2821108 ↗
24. Yang Y, Liang X, Chen W, Cao L, Li M, Sheldon BW, Lou J (2015) Quantification and promotion of interfacial interactions between carbon nanotubes and polymer derived ceramics. Carbon 95:964–97110.1016/j.carbon.2015.08.104 ↗
25. Chu TTB, Tobias G, Salzmann C, Ballesteros B, Grobert N, Todd RI, Green MLH (2008) Fabrication of carbon-nanotube-reinforced glass-ceramic nanocomposites by ultrasonic in situ sol–gel processing. J Mater Chem 18:5344–534910.1039/b809369e ↗
26. Yang Y, Qiu S, Cui W, Zhao Q, Cheng X, Li RKY, Xie X, Mai YW (2009) A facile method to fabricate silica-coated carbon nanotubes and silica nanotubes from carbon nanotubes templates. J Mater Sci 44:4539–4545. doi: 10.1007/s10853-009-3687-110.1007/s10853-009-3687-1 ↗
27. Zhang M, Zhang X, He X, Chen L, Zhang Y (2010) A facile method to coat mesoporous silica layer on carbon nanotubes by anionic surfactant. Mater Lett 64:1383–138610.1016/j.matlet.2010.03.032 ↗
28. Zhu HL, Han FD, Lun N, Qi YX, Bai YJ, Bi JQ, Meng XL, Zhang B, Wang Y, Liu JR, Fan RH (2010) Rapid, low-temperature synthesis of β-SiC nanowires from Si and graphite. J Am Ceram Soc 93:2415–241810.1111/j.1551-2916.2010.03731.x ↗
29. Dasog M, Smith LF, Purkait TK, Veinot JGC (2013) Low temperature synthesis of silicon carbide nanomaterials using a solid-state method. Chem Commun 49:7004–700610.1039/c3cc43625j ↗
30. Outokumpu HSC Chemistry® Version 5.1 (2002) Outokumpu Research Oy Information Service P.O. Box 60 FIN - 28101 PORI, Finland. www.outokumpu.com/hsc
31. Wang Y-Q, Zhou BL, Wang ZM (1995) Oxidation protection of carbon fibers by coatings. Carbon 33:427–43310.1016/0008-6223(94)00167-X ↗
32. Morisada Y, Miyamoto Y, Takaura Y, Hirota K, Tamari N (2007) Mechanical properties of SiC composites incorporating SiC-coated multi-walled carbon nanotubes. Intl J Ref Met Hard Mater 25:322–32710.1016/j.ijrmhm.2006.08.005 ↗
33. Norimatsu W, Kawai C, Kusunoki M (2011) A close-packed-carbon-nanotube film on sic for thermal interface material applications. In: Marulanda JM (ed) Nanotechnology and nanomaterials. Electronic properties of carbon nanotubes. INTECH Open Access Publisher. doi: 10.5772/17269 , ISBN 978-953-307-499-310.5772/17269 ↗
34. Park J-W, Kim E-S, Kim J-U, Kim Y, Windes WE (2016) Enhancing the oxidation resistance of graphite by applying an SiC coat with crack healing at an elevated temperature. Appl Surf Sci 378:341–34910.1016/j.apsusc.2016.03.203 ↗
35. Henry DJ, Christopher AL, Evans E, Yarovsky I (2005) Theoretical study of adhesion between graphite, polyester and silica surfaces. Mol Simul 31:449–45510.1080/089270412331332712 ↗