Microstructural evolution during creep of a hot extruded 2D70Al-alloy
Source abstract
Abstract
Microstructural evolution during creep of a hot extruded Al–Cu–Mg–Fe–Ni (2D70) Al-alloy was investigated in this study using transmission electron microscopy (TEM). The samples for creep test were carried out two-stage homogenization, followed by extruding. The creep ultimate strength dropped and the temperature increased gradually from 312 to 117 MPa and from 423 to 513 K, respectively. The microstructural observation for the crept samples showed that the S′ phase coarsened with increased creep temperature and the aging precipitates transformed from S″ phase to S′ phase during creep process. Meanwhile, excess solute atoms in supersaturated solid solution dynamically precipitated to further form finer S′ phase and S″ phase, which pinned the dislocations and impeded the dislocation movements. Large amount of dislocations piled up around the micron-scale Al9FeNi phase, and a lot of dislocation walls were generated along 〈220〉 orientation. S phase accumulates around these defects. The interaction between dislocations and precipitates was beneficial for the improved performances at elevated temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Novy F, Janecek M, Kral R (2009) J Alloy Compd 487:14610.1016/j.jallcom.2009.08.014 ↗
2. Bergsma SC, Li X (1996) J Mater Eng Perform 5:10010.1007/BF02647276 ↗
3. Wang J, Yi D, Su X, Yin F (2008) Mater Charact 59:96510.1016/j.matchar.2007.08.007 ↗
4. Ber LB (2000) Mater Sci Eng A 280:8310.1016/S0921-5093(99)00660-7 ↗
5. Bardi F, Cabibbo M, Spigarelli S (2002) Mater Sci Eng 334:8710.1016/S0921-5093(01)01775-0 ↗
6. Yu K, Li W, Li S, Zhao J (2004) Mater Sci Eng A 368:8810.1016/j.msea.2003.09.092 ↗
7. Majimel J, Molenat G, Casanove MJ (2002) Scripta Mater 46:11310.1016/S1359-6462(01)01200-3 ↗
8. Roldan M, Sifferlent R (1972) Acta Metall 20:82910.1016/0001-6160(72)90131-9 ↗
9. Singer R, Blum WZ (1977) Metallkde 68:328
10. Wang G-j, Xiong B-q, Zhang Y-a, Li Z-h, Li P-y (2009) Int J Miner Metall Mater 16:42710.1016/S1674-4799(09)60075-3 ↗
11. Djakovic A, Basoalto HC, Dyson BF, McLean M (2005) Metalurgija 11:257