journal article·2007-08

Study on the damping behavior of Al/SiCp composite in thermal cycling

Hongxiang Zhang, Mingyuan Gu

Journal of Materials Science· Volume 42· Issue 15
Publisher page

Abstract

A SiC particulate reinforced 1040 commercially pure aluminum was thermally cycled in air between 20 and 300 °C up to 500 cycles. And the damping capacities of the specimens after 50 and 500 cycles were measured against temperature and strain amplitude. Thermal cycling causes the increase in damping, and dislocation damping is the main mechanism. A damping peak was observed in the range of 150–200 °C, which is related to dislocation motion. Thermal cycling leads to the increase in the peak temperature. The activation energy of the internal friction peak was calculated by Arrhenius equation, yielding 1.02 and 1.09 eV for 50 and 500 cycles, respectively. Increase in dislocation during thermal cycling is responsible for the increase in peak temperature and activation energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Ahn JJ, Ochiai S (2002) J Comp Mater 36:207310.1177/0021998302036017979 ↗
2. Oguocha INA, Radjabi M, Yannacopoulos S (2001) Can Metall Quart 40(2):24510.1179/000844301794388434 ↗
3. Lloyd DJ (1991) Acta Metall Mater 39:5910.1016/0956-7151(91)90328-X ↗
4. Taya M, Mori T (1987) Acta Metall 35:15510.1016/0001-6160(87)90224-0 ↗
5. Dunand DC, Mortensen A (1991) Acta Metall Mater 39:12710.1016/0956-7151(91)90261-X ↗
6. Yu D, Chandra T (1995) Mater Sci Forum 189–190:30310.4028/www.scientific.net/MSF.189-190.303 ↗
7. Trojanova Z, Pahutova M, Kiehn J, Lukac P, Kainer KU (1997) Key Eng Mater 127–131(Pt 2):1001
8. Kustov S, Golyandin S, Sapozhnikov K, Vincent A, Maire E, Lormand G (2001) Mater Sci Eng A 313(1–2):21810.1016/S0921-5093(01)00971-6 ↗
9. Lavernia EJ, Zhang J, Perez RJ (1995) Key Eng Mater 104–107:69110.4028/www.scientific.net/KEM.104-107.691 ↗
10. Parrini L, Schaller R (1996) Acta Mater 44(10):389510.1016/S1359-6454(96)00065-1 ↗
11. Urreta S, Schaller R (1993) Scr Metall Mater 29:16510.1016/0956-716X(93)90302-9 ↗
12. Wang C, Zhu Z (1998) Scr Mater 38(12):173910.1016/S1359-6462(98)00116-X ↗
13. Parrini L, Schaller R (1995) Metall Trans A 26:145710.1007/BF02647596 ↗
14. Vicent A, Lormand G, Durieux S, Girard C, Maire E, Fougeres R (1996) J Phys IV C8:719
15. Zhang J, Perez RJ, Lavernia EJ (1994) Acta Metall Mater 42:39510.1016/0956-7151(94)90495-2 ↗
16. Perez RJ, Zhang J, Gungor RJ (1993) Metall Trans A 24:70110.1007/BF02656638 ↗
17. Zener C (1948) Elasticity and anelasticity of metals. University of Chicago, Chicago, IL
18. Kê TS (1947) Phys Rev 72:4110.1103/PhysRev.72.41 ↗
19. Flom Y, Arsenault RJ (1986) Mater Sci Eng A 77:19110.1016/0025-5416(86)90368-X ↗
20. Schoek G (1969) Phys Status Solid 32:65110.1002/pssb.19690320216 ↗
21. Vogelsang M, Arsenault RJ, Fisher RM (1986) Metall Trans A 17:37910.1007/BF02643944 ↗
22. Hill R (1983) The mathematical theory of plasticity. Oxford University Press, Oxford
23. Granato AV, Lücke K (1956) J Appl Phys 27:58310.1063/1.1722436 ↗
24. Granato AV, Lücke K (1956) J Appl Phys 27:78910.1063/1.1722485 ↗
25. Granato AV, Lücke K (1981) J Appl Phys 52:713610.1063/1.328687 ↗
26. Nowick AS, Berry BS (1972) Anelastic relaxation in crystalline solids. Academic Press, New York