journal article·2007-01-31

Effect of the amount of excess oxides on the densification of α-SiAlON fabricated via a reaction-bonding process

Youichirou Kaga, Mark I. Jones, Kiyoshi Hirao, Shuzo Kanzaki

Journal of Materials Science· Volume 42· Issue 2
Publisher page

Abstract

Y-α-SiAlONs with elongated grains were fabricated via a reaction-bonding process using starting compositions containing excess oxides in the form of Y2O3 and SiO2. The density of post-sintered specimens reached a maximum value with compositions containing 2 mass% excess oxides, although conventionally sintered materials of this composition were not fully dense. However for compositions containing smaller amounts of excess oxides, the density of the specimen fabricated via a reaction-bonding process was lower than that via a conventional process. In these samples it is thought that liquid phase sintering was difficult to be achieve during the post-sintering process, since the amount of SiO2 contained in the starting powder was lower and the Al2O3 in the starting composition was consumed for the production of β-SiAlON during nitridation. There was also a decrease in density of the reaction-bonded materials with further increases in the amounts of additional oxides. For these samples the compacts could not be densified uniformly, because of non-uniformity of the phase composition in the nitrided compacts. The dense reaction bonded α-SiAlON with elongated grains, fabricated from compositions with 2 mass% excess oxides exhibited both high fracture toughness and high hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Hwang CJ, Susintzky DW, Beaman DR (1995) J Am Ceram Soc 78:58810.1111/j.1151-2916.1995.tb08219.x ↗
2. Huang ZK, Jiang YZ, Tien TY (1996) J Mater Sci Lett 16:74710.1023/A:1018589316233 ↗
3. Nordberg L-O, Shen Z, Nygren M, Ekstrom T (1995) J Eur Ceram Soc 17:57510.1016/S0955-2219(96)00093-3 ↗
4. Wang H, Cheng Y-B, Muddle BC, Gao L, Yen TS (1996) J Mater Sci Lett 15:144710.1007/BF00275302 ↗
5. Chen I-W, Rosenflanz A (1997) Nature (London) 389:70110.1038/39542 ↗
6. Shen Z, Zhao Z, Peng H, Nygren M (2002) Nature (London) 417:26610.1038/417266a ↗
7. Kurama S, Herrmann M, Mandal H (2002) J Eur Ceram Soc 22:10910.1016/S0955-2219(01)00237-0 ↗
8. Mangels JA, Tennenhouse GJ (1980) Am Ceram Soc Bull 59:1216
9. Ziegler G, Heinrich J, Wötting G (1987) J Mater Sci, 22:304110.1007/BF01161167 ↗
10. Kaga Y, Jones MI, Hirao K, Kanzaki S (2004) J Am Ceram Soc 87:95610.1111/j.1551-2916.2004.00956.x ↗
11. Mitomo M (1977) J Mater Sci 12:27310.1007/BF00566267 ↗
12. Pavarajarn V, Kimura S (2001) J Am Ceram Soc 84:166910.1111/j.1151-2916.2001.tb00897.x ↗
13. Gazzara CP, Messier DR (1977) Am Ceram Soc Bull 56:777
14. Shen Z, Ekström T, Nygren M (1996) J Am Ceram Soc 79:72110.1111/j.1151-2916.1996.tb07935.x ↗
15. Ekström T, Käll PO, Nygren M, Olsson PO (1989) J Mater Sci 24:185310.1007/BF01105715 ↗
16. Hwang S-L, Chen I-W (1994) J Am Ceram Soc 77:16510.1111/j.1151-2916.1994.tb06972.x ↗
17. Huang ZK, Tien TY, Yen TS (1986) J Am Ceram Soc 69:C24110.1111/j.1151-2916.1986.tb07349.x ↗
18. Sun WY, Tien TY, Yen TS (1991) J Am Ceram Soc 74:254710.1111/j.1151-2916.1991.tb06797.x ↗