journal article·2007-01-17Open access

An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process

J. Zhang, B. L. Fox

Journal of Materials Science· Volume 42· Issue 1

Abstract

A novel fabrication process for advanced composite components—the QuicktepTM process was described. 2/2 twill weave MTM56/CF0300 carbon epoxy composite laminates were manufactured by the Quickstep and the autoclave processes. The response of these laminates to drop-weight low velocity impact at energy levels ranging from 5 to 30 J was investigated. It was found that the laminates fabricated by the Quickstep had better impact damage tolerance than those fabricated by the autoclave. Optical microscopy revealed extensive matrix fracture in the center of the backside of the autoclave laminates indicating the more brittle property of the epoxy matrix cured by the autoclave process. Interfacial shear strength (IFSS) for two composite systems were measured by micro–debond experiments. The MTM56/CF0300 material cured by the Quickstep showed stronger fibre matrix adhesion. Since the thickness and density of the impact targets produced by two processes were different, finite element analysis (FEA) was performed to study the effect of these factors on the impact response. The simulation results showed that the difference in thickness and density affects the stress distribution under impact loading. Higher thickness and lower density caused by processing lead to less endurance to drop weight impact loading. Therefore the better performance of Quickstep laminates under impact loading was not due to the thickness and density change, but resulted from stronger mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Richardson MOW, Wisheart MJ (1996) Composites Part A 27: 112310.1016/1359-835X(96)00074-7 ↗
2. López-Puente J, Zaera R, Navarro C (2002) Composites Part B 33: 55910.1016/S1359-8368(02)00065-3 ↗
3. Zaretsky E, De Botton G, Perl M (2004) Int J Solids Struct 41: 56910.1016/j.ijsolstr.2003.09.026 ↗
4. Ho H, Drzal LT (1996) Composites Part A 27: 96110.1016/1359-835X(96)84802-0 ↗
5. Oguibe CN, Webb DC (1999) Compos Sci Technol 59: 191310.1016/S0266-3538(99)00050-0 ↗
6. De Moura MFSF, Marques AT (2002) Composites Part A 33: 36110.1016/S1359-835X(01)00119-1 ↗
7. Sala G (2000) Composites Part B 31: 16110.1016/S1359-8368(00)00006-8 ↗
8. www.quickstep.com.au
9. LOURENCO NFS (2002) In: Predictive finite element method for axial crush of composite tubes University of Nottinggham
10. Abrate S (1994) Appl Mech Rev 47: 51710.1115/1.3111065 ↗
11. Cantwell WJ (1985) Compos Struct 3: 24110.1016/0263-8223(85)90056-X ↗
12. Aymerich F, Priolo P, Vacca D (1999) E-J Non-Destruct Test 4
13. Soutis C, Smith FC, Matthews FL (2000) Composites Part A 31: 53110.1016/S1359-835X(99)00103-7 ↗
14. Zhang J, Fox BL (2005) In: SEBO SAMPE Europe business office (ed) Proceedings of the 26th SAMPE EUROPE International Conference, Paris, p. 537
15. Desaegar M, Verpoest L (1993) Compos Sci Technol 48: 21510.1016/0266-3538(93)90139-8 ↗
16. Cartiė DDR, Irving PE (2002) Composites Part A 33: 48310.1016/S1359-835X(01)00141-5 ↗
17. Davies G, Zhang X (1995) Int J Impact Eng 16: 14910.1016/0734-743X(94)00039-Y ↗