Preparation and properties of novel fishnet fibers with inhibitory effects on the adhesion of seaweeds
Source abstract
Abstract
A novel Nylon-6 fiber with the anti-adhesion of seaweeds was prepared for the use of fishnet by the technique of graft modification. The modification was performed by UV radiation-induced graft polymerization of Poly(acrylic acid) (PAA) onto Nylon-6 fibers, and to form crosslinked PAA hydrogels on the surface of them. The structure of the anti-adhesion fibers was investigated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). The mechanical properties and water retention capacity were measured, respectively. Three kinds of seaweeds (Chlorella, Dunaliella and Chrysophyte) were employed to evaluate the inhibitory effects on the adhesion. The results showed that Nylon-6 fibers modified by PAA hydrogels had a strong effect on the adhesion of the three kinds of seaweeds. The effects were improved with the increase of the grafting amount. Results from the mechanical analysis revealed that the tensile strength of the modified fibers decreased, however, the ratio of elongation increased with the increase of the grafting amount. The novel fibers also showed a good water retention capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Marine Biology and Environmental Chemistry · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Katsuyama Y, Kurokawa T, Kaneko T, Gong JP, Osada Y, Yotsukura N, Motomura T (2002) Macromol Biosci 2:16310.1002/1616-5195(20020501)2:4<163::AID-MABI163>3.0.CO;2-2 ↗
2. Chen L, Kim BS, Nishino M, Gong JP, Osada Y (2000) Macromol 33:123210.1021/ma990923i ↗
3. Chen L, Gong JP, Osada Y (2002) Moacromol Rapid Comm 23:17110.1002/1521-3927(20020201)23:3<171::AID-MARC171>3.0.CO;2-P ↗
4. Chen L, Dong J, Ding YM, Han WJ (2005) J Appl Polym Sci 96:243510.1002/app.21709 ↗
5. Chen L, Li SG, Zhao YP, Wang YC, Wang QW (2005) J Appl Polym Sci 96:216310.1002/app.21675 ↗
6. Dong J, Chen L, Liu T (2005) New Chem Mater 33:47
7. Kaetsu I, Uchida K, Sutani K, Sakata S (2000) Radiat Phys Chem 57:46510.1016/S0969-806X(99)00416-8 ↗
8. Choi S-H, Nho YC (2000) Radiat Phys Chem 58:15710.1016/S0969-806X(99)00367-9 ↗
9. Guo YH, Zhang JC, Shi MW (1999) J Appl Polym Sci 73:116110.1002/(SICI)1097-4628(19990815)73:7<1161::AID-APP8>3.0.CO;2-F ↗
10. Gurdag G, Yasar M, Gurkaynak MA (1997) J Appl Polym Sci 66:92910.1002/(SICI)1097-4628(19971031)66:5<929::AID-APP13>3.0.CO;2-I ↗
11. Kondo T, Koyama M, Kubota H, Katakai R (1997) J Appl Polym Sci 67:205710.1002/(SICI)1097-4628(19980321)67:12<2057::AID-APP11>3.0.CO;2-Z ↗
12. EI-Nesr EM (2002) Polym Adv Technol 13:62610.1002/pat.262 ↗
13. Phadnis S, Patri M, Hande Varsha R, Deb PC (2003) J Appl Polym Sci 90:257210.1002/app.12727 ↗
14. Karlesson JO, Gatenholm P (1999) Polymer 40:37910.1016/S0032-3861(98)00243-2 ↗
15. Lee SB, Ha DI, Cho SK, Kim SJ, Lee YM (2004) J Appl Polym Sci 92:261210.1002/app.20265 ↗
16. Zhao QX, Liu MY, Zhang Z, Niu JF, Wang YD, Li XK (1998) Chin J Appl Chem 15:3510.1002/cjoc.19970150108 ↗