Effect of spark plasma sintering temperature on the phase equilibria and dielectric properties of BaTi2O5 ceramics
Source abstract
Abstract
The effect of sintering temperature (ranging from 1055 to 1200 °C) on the phase ingredient and dielectric property of the nominal BaTi2O5 ceramics (starting with the Ba/Ti of 1:2) fabricated by a spark plasma sintering method were systematically studied. At the first stage, BaTi2O5 component was enhanced in the sintering temperature range of 1055–1120 °C; it turned out to be the dominant phase. For these BaTi2O5 phase dominated ceramics, the Curie temperature T c rised on increasing the sintering temperature and saturated around 440 °C with the maximum dielectric constant of 500. Further increasing the sintering temperature, the decomposition of the obtained BaTi2O5 into BaTiO3 extensively happened; the ceramics turned to be the BaTi2O5 and BaTiO3 coexisting state. These ceramics can be characterized by two dielectric anomalies. One at ~420 °C stood for the phase transition of BaTi2O5 while the other at ~150 °C stood for the transition of BaTiO3, which is exceptionally high as the normal BaTiO3 ceramics. Further increasing the sintering temperature (until 1200 °C) would dramatically enhance the BaTiO3 phase; the ceramics showed T c at 130 °C with the maximum dielectric constant of 1800.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Uchino K (2000) Ferroelectric Devices. Marcel Dekker Inc., New York
2. Jaffe B (1971) Piezoelectric ceramics. Academic Press, India
3. Damjanovic D (1998) Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics. Rep Prog Phys 61:1267–132410.1088/0034-4885/61/9/002 ↗
4. Newnham RE (1989) Electroceramics. Rep Prog Phys 52:123–15610.1088/0034-4885/52/2/001 ↗
5. Liu W, Ren X (2009) Large piezoelectric effect in Pb-free ceramics. Phys Rev Lett 103:25760210.1103/PhysRevLett.103.257602 ↗
6. Akishige Y, Fukano K, Shigematsu H (2003) New Ferroelectric BaTi2O5. Jpn J Appl Phys 42:L946–L94810.1143/JJAP.42.L946 ↗
7. Akashi T, Iwata H, Goto T (2003) Preparation of BaTi2O5 single crystal by a Floating Zone Method. Mater Trans 44:802–80410.2320/matertrans.44.802 ↗
8. Akishige Y, Fukana K, Shigematsu H (2004) Crystal growth and dielectric properties of new ferroelectric barium titanate: BaTi2O5. J Electroceram 13:561–56510.1007/s10832-004-5158-z ↗
9. Waghmare U, Sluiterm MHF, Kimura T, Goto T (2004) A lead-free high-T ferroelectric BaTiO: a first-principles study. Appl Phys Lett 84:4917–491910.1063/1.1757021 ↗
10. Zhu N, West AR (2010) Formation and stability of ferroelectric BaTi2O5. J Am Ceram Soc 93:295–30010.1111/j.1551-2916.2009.03393.x ↗
11. Yue X, Tu R, Goto T, Ru H (2010) Effect of CaO and ZrO2 co-substitution on dielectric properties of BaTi2O5 prepared by arc melting. J Ceram Soc Jpn 117:435–43810.2109/jcersj2.117.435 ↗
12. Li GJ, Tu R, Goto T (2009) Preparation of polycrystalline BaTi2O5 electric ceramics. Mater Lett 63:2280–228210.1016/j.matlet.2009.07.040 ↗
13. Tangjuank S, Tunkasiri T (2005) Sol-gel synthesis and characterization of BaTi2O5 powders. Appl Phys A 81:1105–110710.1007/s00339-004-2968-4 ↗
14. Akishige Y, Honda K, Tsukada S (2011) Synthesis and dielectric properties of Mn-doped BaTi2O5 ceramics. Jpn. J. Appl. Phys 50(9):NC1010.1143/JJAP.50.09NC10 ↗
15. Gong Y, Liu C, Guo D, Wang C, Shen Q, Zhang L (2012) Effect of Zr content on microstructure of BaTi2O5 powders prepared by sol–gel method. Mater Lett 73:72–7410.1016/j.matlet.2012.01.022 ↗
16. Moriyoshi C, Kuroiwa Y, Masuno A, Inoue H (2012) Site-selective calcium substitution in BaTi2O5: effect on the crystal structure and the ferroelectric phase transition. J Phys Soc Jpn 81:01470610.1143/JPSJ.81.014706 ↗
17. Zhang J, Yu J, Chao M, Liang E, Li M, Li D (2012) Textured BaTi2O5 ceramic synthesized by laser rapid solidification method and its dielectric properties. J Mater Sci 47:1554–155810.1007/s10853-011-5947-0 ↗
18. Akishige Y, Xu J, Shigematsu H, Morito S, Ohba T (2009) Synthesis of BaTi2O5 Nanopowders by sol–gel method and the dielectric Properties of the ceramics. Jpn J Appl Phys 48:05140210.1143/JJAP.48.051402 ↗
19. Yue X, Tu R, Goto T (2009) Dielectric properties of Ba1-xCaxTi2O5 prepared by arc melting. Mater Trans 50:245–24810.2320/matertrans.MRA2008333 ↗
20. Peng J, Wang CB, Li L, Shen Q, Zhang LM (2012) Preparation and property of BaTi2O5 ceramics by arc-melting and spark plasma sintering. J Electroceram 28:256–26010.1007/s10832-012-9724-5 ↗
21. Liu W, Tsukada S, Akishige Y (2014) Preparation and ferroelectric properties of MnO2 doped BaTi2O5 ceramics by spark plasma sintering from the solid-state-calcined powder. J Mater Sci: Mater Electr 25:1280–128310.1007/s10854-014-1722-8 ↗
22. Liu W, Tsukada S, Akishige Y (2014) Effect of fabrication routes on the properties of Mn-doped BaTi2O5 ceramics. Jpn J Appl Phys 53:05FE0310.7567/JJAP.53.05FE03 ↗
23. Lee S, Liu Z, Kim M, Randall C (2007) Clive A Influence of nonstoichiometry on ferroelectric phase transition in BaTiO3. J Appl Phys 101:05411910.1063/1.2710280 ↗
24. Beltrán H et al (2005) Electrical properties of ferroelectric BaTi2O5 and dielectric Ba6Ti17O40 ceramics. J Appl Phys 97:08410410.1063/1.1862766 ↗