journal article·2003-05

Recrystallized grain size prediction in a particulate reinforced metal matrix composite

M. Ferry, P. R. Munroe

Journal of Materials Science· Volume 38· Issue 9
Publisher page

Abstract

The recrystallized grain size following cold rolling and annealing of an Al alloy (AA2014) and a particulate reinforced AA2014 composite was investigated. The composite contained 20 vol% alumina particulates of average diameter 15 μm. The recrystallized grain size in the composite was finer than in the alloy, for a given set of conditions; this was most notable for material strained less than 50% cold-work. This behaviour was attributable to a higher nucleation efficiency in the matrix adjacent to coarse alumina particles in the composite. A model was presented for the composite to predict the recrystallized grain size as a function of strain, with respect to the size distribution and number density of alumina particles. This model predicted the strain dependence of the recrystallized grain size and, in particular, the grain size insensitivity to strain at moderate-to-high levels of cold-work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. T. W. Clyne and P. J. Withers, “Introduction to Metal Matrix Composites” (Cambridge University Press, 1995).
2. D. J. Lloyd, Int. Mater. Rev. 39 (1994) 1.10.1179/imr.1994.39.1.1 ↗
3. J. W. Miller and F. J. Humphreys, Scripta Metall. 25 (1991) 33.10.1016/0956-716X(91)90349-6 ↗
4. F. J. Humphreys, in Proc. 9th Int. Risø Symp., Risø National Laboratories, Roskilde (1988) p. 51.
5. F. J. Humphreys, W. S. Miller and M. R. Djazeb, Mater. Sci. Tech. 6 (1990) 1139.10.1179/mst.1990.6.11.1157 ↗
6. B.-C. Ko, G. S. Park and Y.-C. Yoo, J. Mater. Proc. Tech. 95 (1999) 210.10.1016/S0924-0136(99)00292-7 ↗
7. Y. L. Liu, N. Hansen and D. Juul Jensen, Metall. Trans A 20 (1989) 1743.10.1007/BF02663206 ↗
8. Y. L. Liu, D. Juul Jensen and N. Hansen, ibid. 23 (1992) 807.10.1007/BF02675558 ↗
9. B. V. Radhakrishna Y. R. Mahajan and Y. V. R. K. Prasad, Metall. Mater. Trans A 31 (2000) 629.10.1007/s11661-000-0006-5 ↗
10. M. Ferry, P. R. Munroe, A. Crosky and T. Chandra, Mater. Sci. Tech. 8 (1992) 43.10.1179/026708392790169894 ↗
11. M. Ferry and P. R. Munroe, ibid. 11 (1995) 663.
12. Idem., ibid. 11 (1995) 734.10.1179/mst.1995.11.8.734 ↗
13. B.-C. Ko and Y.-C. Yoo, Comp. Sci. Tech. 58 (1998) 479.10.1016/S0266-3538(97)00147-4 ↗
14. R. A. Shahani and T. W. Clyne, Mater. Sci. Eng. A 135 (1991) 281.10.1016/0921-5093(91)90576-9 ↗
15. C. A. Stanford-Beale and T. W. Clyne, Comp. Sci. Tech. 35 (1989) 121.10.1016/0266-3538(89)90092-4 ↗
16. F. J. Humphreys and M. Hatherly, “Recrystallization and Related Annealing Phenomena” (Pergamon Press, 1995).10.1016/B978-0-08-041884-1.50017-9 ↗
17. G. M. Vyletel, P. E. Krajewski, D. C. Van Aken, J. W. Jones and J. E. Allison, Scripta Metall. et Mater. 27 (1992) 549.10.1016/0956-716X(92)90338-F ↗
18. F. J. Humphreys, Acta Metall. 25 (1977) 1323.10.1016/0001-6160(77)90109-2 ↗
19. E. Nes, ibid. 24 (1976) 391.10.1016/0001-6160(76)90059-6 ↗
20. E. Nes and J. A. Wert, Scripta Metall. 18 (1984) 1433.10.1016/0036-9748(84)90381-8 ↗
21. J. W. Cahn, Acta Metall. 4 (1954) 449.10.1016/0001-6160(56)90041-4 ↗
22. R. Sandstrom, Z. Metallkde 71 (1980) 681.
23. E. E. Underwood, “Quantitative Stereology” (Addison Wesley, Reading, MA, 1970) p. 81.
24. M. Ferry, P. R. Munroe and A. Crosky, Scripta Metall. Mater 29 (1993) 741.10.1016/0956-716X(93)90219-I ↗
25. R. L. Fullman, Trans. A.I.M.E. 197 (1953) 447.
26. M. Ferry, P. R. Munroe and A. Crosky, Scripta Metall. Mater 29 (1993) 1235.10.1016/0956-716X(93)90460-A ↗
27. P. Herbst and J. Huber, in Proc. 5th Int. Conf. on Textures, edited by G. Gottstein and K. Lücke, Berlin (1978) Vol. 1, p. 453.