Superplasticity and superplastic-like flow in cubic zirconia with silica
Source abstract
Abstract
Experiments were conducted at temperatures from 1573 to 1748 K to evaluate the flow properties and the potential for achieving superplasticity in an 8 mol% Y2O3-stabilized cubic ZrO2 (termed 8Y-CSZ) containing 5 wt% colloidal SiO2. Tests were conducted under constant strain rate conditions and under creep conditions at constant stress. The stress exponent was determined as ~1.8, and the activation energy for creep was measured as ~600–670 kJ mol−1. The results show that the presence of an amorphous second phase is effective in limiting grain growth. A maximum superplastic elongation of more than 500 % was recorded at a testing temperature of 1703 K. An analysis of the results suggests that the flow mechanism is associated with interface-controlled diffusion creep.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Pearson CE (1934) The viscous properties of extruded eutectic alloys of lead-tin and bismuth-tin. J Inst Metals 54:111–124
2. Langdon TG (2009) Seventy-five years of superplasticity: historic developments and new opportunities. J Mater Sci 44:5998–6010. doi: 10.1007/s10853-009-3780-510.1007/s10853-009-3780-5 ↗
3. Chokshi AH, Mukherjee AK, Langdon TG (1993) Superplasticity in advanced materials. Mater Sci Eng R 10:237–27410.1016/0927-796X(93)90009-R ↗
4. Maehara Y, Langdon TG (1990) Superplasticity in ceramics. J Mater Sci 25:2275–2286. doi: 10.1007/BF0063801810.1007/BF00638018 ↗
5. Kawasaki M, Langdon TG (2007) Principles of superplasticity in ultrafine-grained materials. J Mater Sci 42:1782–1796. doi: 10.1007/s10853-006-0954-210.1007/s10853-006-0954-2 ↗
6. Kawasaki M, Langdon TG (2014) Review: achieving superplasticity in metals processed by high-pressure torsion. J Mater Sci 49:6487–6496. doi: 10.1007/s10853-014-8204-510.1007/s10853-014-8204-5 ↗
7. Ahmed MMI, Langdon TG (1977) Exceptional ductility in the superplastic Pb-62 Pct Sn eutectic. Metall Trans A 8A:1832–183310.1007/BF02646892 ↗
8. Higashi K, Ohnishi T, Nakatani Y (1985) Superplastic behavior of commercial aluminum bronze. Scripta Metall 19:821–82310.1016/0036-9748(85)90199-1 ↗
9. Ma Y, Langdon TG (1994) Factors influencing the exceptional ductility of a superplastic Pb-62 pct Sn alloy. Metall Mater Trans A 25A:2309–231110.1007/BF02652333 ↗
10. Barnes AJ (2007) Superplastic forming: 40 years and still growing. J Mater Eng Perform 16:440–45410.1007/s11665-007-9076-5 ↗
11. Wakai F, Sakaguchi S, Matsuno Y (1986) Superplasticity of yttria-stabilized tetragonal ZrO2 polycrystals. Adv Ceram Mater 1:259–26310.1111/j.1551-2916.1986.tb00026.x ↗
12. Langdon TG (1982) The mechanical properties of superplastic materials. Metall Trans A 13A:689–70110.1007/BF02642383 ↗
13. Nieh TG, Tomasello CM, Wadsworth J (1990) Dynamic grain growth in superplastic Y-TZP and Al2O3/YTZ. In: Materials research society symposium proceedings, Materials Research Society, Warrendale, 196, 343–34810.1557/PROC-196-343 ↗
14. Chen I-W, Xue LA (1990) Development of superplastic structural ceramics. J Amer Ceram Soc 73:2585–260910.1111/j.1151-2916.1990.tb06734.x ↗
15. Hines JA, Ikuhara Y, Chokshi AH, Sakuma T (1998) The influence of trace impurities on the mechanical characteristics of a superplastic 2 mol% yttria stabilized zirconia. Acta Mater 46:5557–556810.1016/S1359-6454(98)00171-2 ↗
16. Chokshi AH (2003) Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia. Scripta Mater 48:791–79610.1016/S1359-6462(02)00519-5 ↗
17. Scott HG (1975) Phase relationship in the zirconia–yttria system. J Mater Sci 10:1527–1535. doi: 10.1007/BF0103185310.1007/BF01031853 ↗
18. Lee IG, Chen I-W (1988) Sintering and grain growth in tetragonal and cubic zirconia. In: Sintering ′87–Proceedings of the international science of sintering symposium, Elsevier Applied Science, Tokyo, 340–34510.1007/978-94-009-1373-8_57 ↗
19. Yoshizawa Y, Sakuma T (1989) Evolution of microstructure and grain growth in ZrO2–Y2O3 alloys. ISIJ Int 29:746–75210.2355/isijinternational.29.746 ↗
20. Chaim R, Heuer A (1986) Phase equilibration in ZrO2–Y2O3 alloys by liquid-film migration. J Amer Ceram Soc 69:243–24810.1111/j.1151-2916.1986.tb07417.x ↗
21. Yoshizawa Y, Sakuma T (1990) Role of grain-boundary glass phase on the superplastic deformation of tetragonal zirconia polycrystal. J Amer Ceram Soc 73:3069–307310.1111/j.1151-2916.1990.tb06718.x ↗
22. Lin Y-J, Angelini P, Mecartney ML (1990) Microstructural and chemical influences of silicate grain-boundary phases in yttria-stabilized zirconia. J Amer Ceram Soc 73:2728–273510.1111/j.1151-2916.1990.tb06753.x ↗
23. Gust M, Goo G, Wolfenstine J, Mecartney ML (1993) Influence of amorphous grain boundary phases on the superplastic behavior of 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP). J Amer Ceram Soc 76:1681–169010.1111/j.1151-2916.1993.tb06635.x ↗
24. Sakuma T, Yoshizawa Y (1994) Superplasticity of ceramics with glass phase. Mater Sci Forum 170–172:369–37810.4028/www.scientific.net/MSF.170-172.369 ↗
25. Wakai F, Kondo N, Ogawa H, Nagano T, Tsurekawa S (1997) Amorphous grain boundary in superplastic ceramics. Mater Sci Forum 243–245:337–34410.4028/www.scientific.net/MSF.243-245.337 ↗
26. Shirooyeh M, Tanju S, Garay JE, Langdon TG (2009) Characterization of a potential superplastic zirconia-spinel nanocomposite processed by spark plasma sintering. Advanced processing and manufacturing technologies for structural and multifunctional materials III. Wiley, Hoboken, pp 31–3610.1002/9780470584392.ch5 ↗
27. Shirooyeh M, Garay JE, Langdon TG (2014) Characteristics of a zirconia-spinel composite processed by a current-activated pressure-assisted densification method. Ceram Eng Sci Proc 35:151–15910.1002/9781119031192.ch15 ↗
28. Kajihara K, Yoshizawa Y, Sakuma T (1995) The enhancement of superplastic flow in tetragonal zirconia polycrystals with SiO2-doping. Acta Metall Mater 43:1235–124210.1016/0956-7151(94)00320-H ↗
29. Sharif AA, Mecartney ML (2003) Superplasticity in cubic yttria-stabilized zirconia with intergranular silica. Acta Mater 51:1633–163910.1016/S1359-6454(02)00564-5 ↗
30. Martin MC, Mecartney ML (2003) Grain boundary ionic conductivity of yttrium stabilized zirconia as a function of silica content and grain size. Solid State Ionics 161:67–7910.1016/S0167-2738(03)00265-0 ↗
31. Langdon TG (1994) An evaluation of the strain contributed by grain boundary sliding in superplasticity. Mater Sci Eng A174:225–23010.1016/0921-5093(94)91092-8 ↗
32. Berbon MZ, Sørensen OT, Langdon TG (1996) A simple technique for the preparation of tensile specimens of yttria-stabilized zirconia. Mater Lett 27:211–21410.1016/0167-577X(95)00286-3 ↗
33. Dillon RP, Sosa SS, Mecartney ML (2004) Achieving tensile superplasticity in 8 mol% Y2O3 cubic stabilized ZrO2 through the addition of intergranular silica. Scripta Mater 50:1441–144410.1016/j.scriptamat.2004.03.008 ↗
34. Yavari P, Langdon TG (1982) A constant stress tensile creep machine for very low stresses. J Test Eval 10:174–17810.1520/JTE11576J ↗
35. Thompson AW (1972) Calculation of true volume grain diameter. Metallography 5:366–36910.1016/0026-0800(72)90018-3 ↗
36. Mecartney ML (2000) Grain boundary engineering of highly deformable ceramics. In: Materials Research Society Symposium Proceedings, Materials Research Society, Warrendale, 601, 81–91
37. Cottom BA, Mayo MJ (1996) Fracture toughness of nanocrystalline ZrO2-3 mol% Y2O3 determined by vickers indentation. Scripta Mater 34:809–81410.1016/1359-6462(95)00587-0 ↗
38. Fukuhara M, Sanpei A (1994) High temperature-elastic moduli and internal dilational and shear frictions of fused quartz. Japan J Appl Phys 33:2890–289310.1143/JJAP.33.2890 ↗
39. Lucas JP (1995) Determining fracture toughness of vitreous silica glass. Scripta Metall Mater 32:743–74810.1016/0956-716X(95)91596-H ↗
40. Langdon TG (1982) Fracture processes in superplastic materials. Metal Sci 16:175–18310.1179/030634582790427208 ↗
41. Langdon TG (1994) A unified approach to grain boundary sliding in creep and superplasticity. Acta Metall Mater 42:2437–244310.1016/0956-7151(94)90322-0 ↗
42. Mackenzie JK (1958) Second paper on statistics associated with the random disorientation of cubes. Biometrika 45:229–24010.1093/biomet/45.1-2.229 ↗
43. Kwon N-H, Kim C-H, Song HS, Lee H-L (2001) Synthesis and properties of cubic zirconia–alumina composite by mechanical alloying. Mater Sci Eng A299:185–19410.1016/S0921-5093(00)01376-9 ↗
44. Navarro LM, Recio P, Jurado JR, Duran P (1995) Preparation and properties evaluation of zirconia-based/Al2O3 composites as electrolytes for solid oxide fuel cell systems. J Mater Sci 30:1949–1960. doi: 10.1007/BF0035301510.1007/BF00353017 ↗
45. Donzel L, Roberts SG (2000) Microstructure and mechanical properties of cubic zirconia (8YSZ)/SiC nanocomposites. J Eur Ceram Soc 20:2457–246210.1016/S0955-2219(00)00117-5 ↗
46. Cutler RA, Reynolds JR, Jones A (1992) Sintering and characterization of polycrystalline monoclinic, tetragonal, and cubic zirconia. J Amer Ceram Soc 75:2173–218310.1111/j.1151-2916.1992.tb04480.x ↗
47. Hiraga K, Morita K, Kim B-N, Hoshida H (2010) Fracture toughness of a silica-doped cubic zirconia (8Y-CSZ). Mater Sci Forum 638–642:3846–385110.4028/www.scientific.net/MSF.638-642.3846 ↗
48. Sharif AA, Imamura PH, Mitchell TE, Mecartney ML (1998) Control of grain growth using intergranular silicate phases in cubic yttria stabilized zirconia. Acta Mater 46:3863–387210.1016/S1359-6454(98)00080-9 ↗
49. Van Riet C, De Meester P (1985) Cavitation in a dilute superplastic Zn-0.5 % Al alloy–a cascade mechanism for cavity generation. Scripta Metall 19:795–80010.1016/0036-9748(85)90194-2 ↗
50. Chokshi AH, Langdon TG (1989) The influence of rolling direction on the mechanical behavior and formation of cavity stringers in the superplastic Zn-22 % Al alloy. Acta Metall 37:715–72310.1016/0001-6160(89)90255-1 ↗
51. Yousefiani A, Earthman JC, Mohamed FA (1998) Formation of cavity stringers during superplastic deformation. Acta Mater 46:3557–357010.1016/S1359-6454(98)00030-5 ↗
52. Ma Y, Langdon TG (1993) An examination of the implications of void growth in submicrometer and nanocrystalline structures. Mater Sci Eng A168:225–23010.1016/0921-5093(93)90731-S ↗
53. Ma Y, Langdon TG (1994) A critical assessment of flow and cavity formation in a superplastic yttria-stabilized zirconia. Acta Metall Mater 42:2753–276110.1016/0956-7151(94)90216-X ↗
54. Ma Y, Langdon TG (1996) The characteristics of cavitation in superplastic metals and ceramics. Metall Mater Trans A 27A:873–87810.1007/BF02649754 ↗
55. Kawasaki M, Horita Z, Langdon TG (2009) Microstructural evolution in high purity aluminum processed by ECAP. Mater Sci Eng A524:143–15010.1016/j.msea.2009.06.032 ↗
56. Xu C, Horita Z, Langdon TG (2011) Microstructural evolution in an aluminum solid solution alloy processed by ECAP. Mater Sci Eng A528:6059–606510.1016/j.msea.2011.04.017 ↗
57. Wongsa-Ngam J, Kawasaki M, Langdon TG (2012) Achieving homogeneity in a Cu-Zr alloy processed by high-pressure torsion. J Mater Sci 47:7782–7788. doi: 10.1007/s10853-012-6587-810.1007/s10853-012-6587-8 ↗
58. Helmick L, Dillon SJ, Gerdes K, Gemmen R, Rohrer GS, Seetharaman S, Salvador PA (2011) Crystallographic characteristics of grain boundaries in dense yttria-stabilized zirconia. Int J Appl Ceram Technol 8:1218–122810.1111/j.1744-7402.2010.02567.x ↗
59. Langdon TG (2002) Creep at low stresses: an evaluation of diffusion creep and Harper-Dorn creep as viable creep mechanism. Metall Mater Trans A 33A:249–25910.1007/s11661-002-0087-4 ↗
60. Langdon TG (2006) Grain boundary sliding revisited: developments in sliding over four decades. J Mater Sci 41:597–609. doi: 10.1007/s10853-006-6476-010.1007/s10853-006-6476-0 ↗
61. Woodford DA (1969) Strain-rate sensitivity as a measure of ductility. Trans ASM 62:291–293
62. Langdon TG (1977) The relationship between strain rate sensitivity and ductility in superplastic materials. Scripta Metall 11:997–100010.1016/0036-9748(77)90254-X ↗
63. Tekeli S, Davies TJ (2011) A comparative study of superplastic deformation and cavitation behaviour in 3 and 8 mol% yttria-stabilized zirconia. Mater Sci Eng A297:168–175
64. Hwang C-MJ, Chen I-W (1990) Effect of a liquid phase on superplasticity of 2-mol%-Y2O3-stabilized tetragonal zirconia polycrystals. J Amer Ceram Soc 73:1626–163210.1111/j.1151-2916.1990.tb09806.x ↗
65. Domínguez-Rodríguez A, Gómez-García D, Wakai F (2013) High temperature plasticity in yttria stabilised tetragonal zirconia polycrystals (Y-TZP). Int Mater Rev 58:399–41710.1179/1743280413Y.0000000018 ↗
66. Sakka Y, Oishi Y, Ando K, Morita S (1991) Cation interdiffusion and phase stability in polycrystalline tetragonal ceria–zirconia–hafnia solid solution. J Amer Ceram Soc 74:2610–261410.1111/j.1151-2916.1991.tb06808.x ↗
67. Sharif AA, Mecartney ML (2004) Superplasticity in cubic yttria stabilized zirconia with 10 wt% alumina. J Eur Ceram Soc 24:2041–204710.1016/S0955-2219(03)00354-6 ↗
68. French JD, Zhao J, Harmer MP, Chan HM, Miller GA (1994) Creep of duplex microstructure. J Amer Ceram Soc 77:2857–286510.1111/j.1151-2916.1994.tb04515.x ↗
69. Berbon MZ, Langdon TG (1999) An examination of the flow process in superplastic yttria-stabilized tetragonal zirconia. Acta Mater 47:2485–249510.1016/S1359-6454(99)00099-3 ↗
70. Domínguez-Rodríguez A, Lagerlöf KPD, Heuer AH (1986) Plastic deformation and solid solution hardening of Y2O3-stabilized ZrO2. J Amer Ceram Soc 69:281–28410.1111/j.1151-2916.1986.tb07427.x ↗
71. McClellan KJ, Heuer AH, Kubin LP (1996) Localized yielding during high temperature deformation of Y2O3-fully-stabilized cubic ZrO2− single crystals. Acta Mater 44:2651–266210.1016/1359-6454(95)00398-3 ↗
72. Domínguez-Rodríguez A, Jiménez-Melendo M, Castaing J (1995) Plasticity of zirconia. In: Bradt RC, Brookes CA, Routbort JL (eds) Plastic deformation of ceramics. Plenum, New York, pp 31–4110.1007/978-1-4899-1441-5_3 ↗
73. Baither D, Baufeld B, Messerschmidt U (1995) Defect formation during plastic deformation of Y2O3-partially-stabilized ZrO2− single crystals. J Amer Ceram Soc 78:1375–137910.1111/j.1151-2916.1995.tb08497.x ↗
74. Chen T, Mohamed FA, Mecartney ML (2006) Threshold stress superplastic behavior and dislocation activity in a three-phase alumina-zirconia-mullite composite. Acta Mater 54:4415–442610.1016/j.actamat.2006.05.002 ↗
75. Arzt E, Ashby MF, Verrall RA (1983) Interface controlled diffusional creep. Acta Metall 31:1977–198910.1016/0001-6160(83)90015-9 ↗
76. Ghosh S, Kilo M, Borchardt G, Chokshi AH (2009) Diffusion and creep in silica-doped tetragonal zirconia. J Amer Ceram Soc 92:3004–301310.1111/j.1551-2916.2009.03321.x ↗
77. Charit I, Chokshi AH (2001) Experimental evidence for diffusion creep in the superplastic 3 mol% yttria-stabilized tetragonal zirconia. Acta Mater 49:2239–224910.1016/S1359-6454(01)00131-8 ↗
78. Coble RL (1963) A model for boundary diffusion controlled creep in polycrystalline metals. J Appl Phys 34:1679–168210.1063/1.1702656 ↗
79. Ashby MF (1969) On interface-reaction control of Nabarro–Herring creep and sintering. Scripta Metall 3:837–84210.1016/0036-9748(69)90191-4 ↗
80. Greenwood GW (1970) The possible effects on diffusion creep of some limitation of grain boundaries as vacancy sources and sinks. Scripta Metall 4:171–17410.1016/0036-9748(70)90187-0 ↗
81. Burton B (1972) Interface reaction controlled diffusional creep: a consideration of grain boundary dislocation climb sources. Mater Sci Eng 10:9–1410.1016/0025-5416(72)90060-2 ↗
82. Andrades L, Bravo-León A, Jiménez-Melendo M, Domínguez-Rodríguez A (1995) High temperature deformation of fine-grained yttria-stabilized zirconia reinforced with Al2O3 platelets. J Phys III 5:1841–1847
83. Bravo-León A, Jiménez-Melendo M, Domínguez-Rodríguez A, Chokshi AH (1996) The role of a threshold stress in the superplastic deformation of fine-grained yttria-stabilized zirconia polycrystals. Scripta Mater 34:1155–116010.1016/1359-6462(95)00650-8 ↗
84. Bravo-León A, Jiménez-Melendo M, Domínguez-Rodríguez A (1996) High temperature plastic deformation at very low stresses of fine-grained Y2O3-partioally stabilized ZrO2. Scripta Mater 35:551–55510.1016/1359-6462(96)00178-9 ↗
85. Domínguez-Rodríguez A, Bravo-León A, Ye JD, Jiménez-Melendo M (1998) Grain size and temperature dependence of the threshold stress for superplastic deformation in yttria-stabilized zirconia polycrystals. Mater Sci Eng A 247:97–10110.1016/S0921-5093(97)00837-X ↗
86. Jiménez-Melendo M, Domínguez-Rodríguez A, Bravo-León A (1998) Superplastic flow of fine-grained yttria-stabilized zirconia polycrystals: constitutive equation and deformation mechanisms. J Amer Ceram Soc 81:2761–277610.1111/j.1151-2916.1998.tb02695.x ↗
87. Li Y, Langdon TG (1997) A simple procedure for estimating threshold stresses in the creep of metal matrix composites. Scripta Mater 36:1457–146010.1016/S1359-6462(97)00041-9 ↗
88. Li Y, Langdon TG (1999) A unified interpretation of threshold stresses in the creep and high strain rate superplasticity of metal matrix composites. Acta Mater 47:3395–340310.1016/S1359-6454(99)00219-0 ↗
89. Berbon MZ, Langdon TG (1997) The variation of strain rate with stress in superplastic zirconia. Mater Sci Forum 243–245:357–36210.4028/www.scientific.net/MSF.243-245.357 ↗
90. Owen DM, Chokshi AH (1998) The high temperature mechanical characteristics of superplastic 3 mol% yttria stabilized zirconia. Acta Mater 46:667–67910.1016/S1359-6454(97)00251-6 ↗