The dynamic compressive behavior and constitutive model of SA508-3 steel at high strain rates under elevated temperatures
Source abstract
Abstract
The SA508-3 steel has been acknowledged as nuclear-grade steel used to manufacture power plant components owing to its high strength, good toughness, and low sensitivity to irradiation embrittlement. In this study, the dynamic mechanical properties of SA508-3 steel are investigated by the split Hopkinson pressure bar tests with a wide range of strain rates (0.0001–6000 s−1) and elevated temperatures (20–600 °C), and the corresponding flow stress curves are obtained. The results suggested that the dynamic stress–strain response of SA508-3 steel is dependent both on the strain rate and temperature, and the temperature sensitivity (na) is independent of the strain rate. Based on the experimental results, a constitutive model is built by Johnson–Cook (J-C) model to describe the dynamical property of SA508-3 steel, and the flow stresses predicted by the established J-C constitutive model at all the tested strain rates and temperatures are in good agreement with the experimental data. Furthermore, a successful finite element (FE) analysis of the milling process of SA508-3 steel at different cutting parameters is carried out by implementing the established J-C constitutive model into the third-wave-AdvantEdge software, and the predicted cutting forces are agreed well with the experimental results, which provides a strong support for the FE analysis of SA508-3 steel milling process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Laser-Plasma Interactions and Diagnostics · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Tanaka Y, Sato I (2011) Development of high purity large forgings for nuclear power plants. J Nucl Mater 417:854–859. https://doi.org/10.1016/j.jnucmat.2010.12.30510.1016/j.jnucmat.2010.12.305 ↗
2. Zhao Y, Jin ZJ, Xu B, Wang QQ, Feng J, Li XR, Kang RK, Wei ZC, Guo J (2021) Effect of surface cleaning on interface bonding performance for 316H stainless steel joints manufactured by additive forging. Mater Des 210:110025. https://doi.org/10.1016/j.matdes.2021.11002510.1016/j.matdes.2021.110025 ↗
3. Sun MY, Xu B, Li DZ, Li YY (2019) Constructing-and-forging method for preparing homogenized forged pieces (EP3275585B1), United States Patent
4. Xie BJ, Yu ZX, Jiang HY, Xu B, Wang CY, Zhang JY, Sun MY, Li DZ, Li YY (2022) Effects of surface roughness on interfacial dynamic recrystallization and mechanical properties of Ti-6Al-3Nb-2Zr-1Mo alloy joints produced by hot-compression bonding. J Mater Sci Technol 96:199–211. https://doi.org/10.1016/j.jmst.2021.03.08510.1016/j.jmst.2021.03.085 ↗
5. Hou X, Liu ZQ, Wang B, Lv WY, Liang XL, Hua Y (2018) Stress-strain curves and modified material constitutive model for Ti-6Al-4V over the wide ranges of strain rate and temperature. Materials 11:938. https://doi.org/10.3390/ma1106093810.3390/ma11060938 ↗
6. Wang QQ, Jin ZJ, Zhao Y, Niu L, Guo J (2021) A comparative study on tool life and wear of uncoated and coated cutting tools in turning of tungsten heavy alloys. Wear. https://doi.org/10.1016/j.wear.2021.20392910.1016/j.wear.2021.203929 ↗
7. Wang XY, Huang CZ, Zou B, Liu HL, Zhu HT, Wang J (2013) Dynamic behavior and a modified Johnson-Cook constitutive model of inconel 718 at high strain rate and elevated temperature. Mater Sci Eng A Struct 580:385–390. https://doi.org/10.1016/j.msea.2013.05.06210.1016/j.msea.2013.05.062 ↗
8. Li SY, Sui JB, Ding F, Wu SX, Chen WL, Wang CY (2021) Optimization of milling aluminum alloy 6061–T6 using modified Johnson-Cook model. Simul Model Pract Theory 111:102330. https://doi.org/10.1016/j.simpat.2021.10233010.1016/j.simpat.2021.102330 ↗
9. Hokka M, Leemet T, Shrot A, Baeker M, Kuokkala VT (2012) Characterization and numerical modeling of high strain rate mechanical behavior of Ti-15-3 alloy for machining simulations. Mater Sci Eng A-Struct 550:350–357. https://doi.org/10.1016/j.msea.2012.04.08610.1016/j.msea.2012.04.086 ↗
10. Zhang Q, Zhang S, Li JF (2017) Three dimensional finite element simulation of cutting forces and cutting temperature in hard milling of AISI H13 steel. Procedia Manuf 10:37–47. https://doi.org/10.1016/j.promfg.2017.07.01810.1016/j.promfg.2017.07.018 ↗
11. Dong DQ, Chen F, Cui ZS (2015) A physically-based constitutive model for SA508-III steel: modeling and experimental verification. Mater Sci Eng A Struct 634:103–115. https://doi.org/10.1016/j.msea.2015.03.03610.1016/j.msea.2015.03.036 ↗
12. Ma J, Liu JS, Guo Z (2020) Establishment of a two-stage constitutive model based on dislocation density theory for as-forged SA508 Gr.3Cl.1. Mater Res Express 7:026521. https://doi.org/10.1088/2053-1591/ab707110.1088/2053-1591/ab7071 ↗
13. Sun MY, Hao LH, Li SJ, Li DZ, Li YY (2011) Modeling flow stress constitutive behavior of SA508-3 steel for nuclear reactor pressure vessels. J Nucl Mater 418:269–280. https://doi.org/10.1016/j.jnucmat.2011.07.01110.1016/j.jnucmat.2011.07.011 ↗
14. Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21:31–48. https://doi.org/10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
15. Zerilli FJ, Armstrong RW (1987) Dislocation-mechanics-based constitutive relations for material dynamics calculations. J Appl Phys 61:1816. https://doi.org/10.1063/1.33802410.1063/1.338024 ↗
16. Follansbee PS, Kocks UF (1988) A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metall 36:81–93. https://doi.org/10.1016/0001-6160(88)90030-210.1016/0001-6160(88)90030-2 ↗
17. Karpat Y (2011) Temperature dependent flow softening of titanium alloy Ti6Al4V: an investigation using finite element simulation of machining. J Mater Process Tech 211:737–749. https://doi.org/10.1016/j.jmatprotec.2010.12.00810.1016/j.jmatprotec.2010.12.008 ↗
18. Niu XY, Geng XC, Li SZ, Chen C, Zhou J (2020) Effect of strain rate on mechanical behavior of Sn0.3Ag0.7Cu solder at macro- and micro-scales. J Mater Sci Mater Electron 31:18763–18776. https://doi.org/10.1007/s10854-020-04417-010.1007/s10854-020-04417-0 ↗
19. Field JE, Walley SM, Proud WG, Goldrein HT, Siviour CR (2004) Review of experimental techniques for high rate deformation and shock studies. Int J Impact Eng 30:725–775. https://doi.org/10.1016/j.ijimpeng.2004.03.00510.1016/j.ijimpeng.2004.03.005 ↗
20. Li YF, Zeng XG (2019) Dynamic tensile behavior and constitutive modeling of TC21 titanium alloy. J Wuhan Univ Technol Mat Sci Edit 34:707–716. https://doi.org/10.1007/s11595-019-210710.1007/s11595-019-2107 ↗
21. Bobbili R, Madhu V (2004) Dynamic behavior and constitutive modeling of Ti-10-2-3 alloy. J Alloy Compd 786:588–593. https://doi.org/10.1016/j.jallcom.2019.01.38010.1016/j.jallcom.2019.01.380 ↗
22. Liu PJ, Quan YM, Ding G (2019) Dynamic mechanical characteristics and constitutive modeling of rail steel over a wide range of temperatures and strain rates. Adv Mater Sci Eng 2019:6862391. https://doi.org/10.1155/2019/686239110.1155/2019/6862391 ↗
23. Nemat-Nasser S, Guo WG, Kihl DP (2001) Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures. J Mech Phys Solid 49:1823–1846. https://doi.org/10.1016/S0022-5096(00)00069-710.1016/S0022-5096(00)00069-7 ↗
24. Lee WS, Lin CF (1998) Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures. Mat Sci Eng A-Struct 241:48–59. https://doi.org/10.1016/S0921-5093(97)00471-110.1016/S0921-5093(97)00471-1 ↗
25. Yu WX, Li Y, Cao JH, Yang ZJ, Zhang JY, Lang ST (2021) The dynamic compressive behavior and constitutive models of a near α TA23 titanium alloy. Mater Today Commun 29:102863. https://doi.org/10.1016/j.mtcomm.2021.10286310.1016/j.mtcomm.2021.102863 ↗