journal article·2022-10

Pinning growth of TiN films toward porous Ti matrix

Xiaowei Zhou, Zhou Lu, Xueyan Jing

Journal of Materials Science· Volume 57· Issue 40
Publisher page

Abstract

Golden-TiN materials have attracted significant attentions as functional films in cutting tools and decoration surface due to its colored surfaces, ultra-high hardness, superior corrosive resistance, etc. With regards to its poor surface toughness, low interfacial adhesion and tedious technological procedures, challenges involved in TiN films have seriously restricted the scope of engineering applications. Herein it is generally considered that constructing honeycomb-like porous Ti matrix by anodizing was expected to support more adsorbing space for N2 gas through nano-pores. Meanwhile, the long-term isothermal aging treatments were used to motivate [Ti] + [N]ad. → TiN chemical bonds, facilitating the pin-holes growth of TiN along the as-anodized nano-pores. Meanwhile, different aging temperature at 500, 600 and 700 °C in air was used to assess chemical composition and properties of TiN films. As a consequence, results manifested that a low-purity TiN film with pyramid-like texture was successfully achieved under isothermal aging at 600 °C for 3 h at 0.8 MPa N2 gas pressure, also depicting an increasing interfacial strength of ~ 39.5 N from scratch tests for TiN-Ti films due to in-deep diffusion by TiN pinning growth. In view of tribological tests that the friction coefficient of TiN film was in a much lower range of 0.2 ~ 0.3 and its lowest value of wear rate was 1.1 × 10–4 mm3/(N·m) for TiN films at 600 °C, which was reduced by 50% compared to bare Ti substrate. Overall, an effective and well-designed approach was carried out for TiN-Ti gradient films on porous Ti surface, thus creatively proposing a concise way for low-purity TiN films within excellent mechanical properties to satisfy the most requirements of engineering devices without high costs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · ZnO doping and properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Shi X, Xu L, Munar ML (2015) Hydrothermal treatment for TiN as abrasion resistant dental implant coating and its fibroblast response. Mat Sci Eng C 49:1–610.1016/j.msec.2014.12.059 ↗
2. Zhao CL, Zhu YB, Yuan Z, Li J (2020) Structure and tribocorrosion behavior of Ti/TiN multilayer coatings in simulated body fluid by arc ion plating. Surf Coat Technol 403:126399. https://doi.org/10.1016/j.surfcoat.2020.12639910.1016/j.surfcoat.2020.126399 ↗
3. Enriquez-Flores CI, Cruz-Valeriano E, Gutierrez-Peralta A et al (2018) Relation between work function, micro structural and mechanical properties of TiN-films. Surf Eng 34:660–66610.1080/02670844.2017.1385233 ↗
4. Li M, Wang F (2003) Effects of nitrogen partial pressure and pulse bias voltage on (Ti, Al)N coatings by arc ion plating. Surf Coat Technol 167:197–20210.1016/S0257-8972(02)00895-2 ↗
5. Chang Z, Siddique A, Shi B et al (2020) Large-area fabrication of TiN thin films with photothermal effect via PECVD. Ceram Int 46:7355–736110.1016/j.ceramint.2019.11.231 ↗
6. Hussein MA, Adesina AY, Kumar AM et al (2020) Mechanical, in-vitro corrosion, and tribological characteristics of TiN coating produced by cathodic arc physical vapor deposition on Ti20Nb13Zr alloy for biomedical applications. Thin Solid Films 709:138183. https://doi.org/10.1016/j.tsf.2020.13818310.1016/j.tsf.2020.138183 ↗
7. Wei DB, Zhang PZ, Yao ZJ et al (2016) Preparation and high-temperature oxidation behavior of plasma Cr-Ni alloying on Ti6Al4V alloy based on double glow plasma surface metallurgy technology. Appl Surf Sci 388:571–57810.1016/j.apsusc.2015.10.064 ↗
8. Gu D, Shen Y, Lu Z (2009) Preparation of TiN-Ti5Si3 in-situ composites by selective laser melting. Mater Lett 63:1577–157910.1016/j.matlet.2009.04.010 ↗
9. Zhou XW, Ouyang C (2017) Anodized porous titanium coated with Ni-CeO2 deposits for enhancing surface toughness and wear resistance. Appl Surf Sci 405:476–48810.1016/j.apsusc.2017.02.034 ↗
10. Jeyachandran YL, Karunagaran B, Narayandass K et al (2007) The effect of thickness on the properties of titanium films deposited by dc magnetron sputtering. Mater Sci Eng A 458:361–36510.1016/j.msea.2006.12.088 ↗
11. Maarouf M, Haider MB, Al-Kuhaili MF (2020) Negative magnetoresistance in iron doped TiN thin films prepared by reactive magnetron sputtering. J Magn Magn Mater 514:167235. https://doi.org/10.1016/j.jmmm.2020.16723510.1016/j.jmmm.2020.167235 ↗
12. Ghobadi N, Ganji M, Luna C (2016) Effects of substrate temperature on the properties of sputtered TiN thin films. J Mater Sci Mater Electron 27:1–910.1007/s10854-015-4093-x ↗
13. Paulitsch J, Schenkel M, Schintlmeisterc A (2010) Low friction CrN/TiN multilayer coatings prepared by a hybrid high power impulse magnetron sputtering/DC magnetron sputtering deposition technique. Thin Solid Films 518:5553–555710.1016/j.tsf.2010.05.061 ↗
14. Chang C, Shih S, Chen P (2014) Effect of duty cycles on the deposition and characteristics of high power impulse magnetron sputtering deposited TiN thin films. Surf Coat Technol 259:232–23710.1016/j.surfcoat.2014.03.011 ↗
15. Wang YX, Guan LL, He Z et al (2021) Influence of pretreatments on physicochemical properties of Ni-P coatings electrodeposited on aluminum alloy. Mater Des 197:109233. https://doi.org/10.1016/j.matdes.2020.10923310.1016/j.matdes.2020.109233 ↗
16. Matsue T, Hanabusa T, Ikeucbi Y (2002) The structure of TiN films deposited by arc ion plating. Vacuum 66:435–43910.1016/S0042-207X(02)00167-7 ↗
17. Zhang H, Li Z, Ma C (2019) The anti-sand erosion performance of TiN films fabricated by filtered cathodic vacuum arc technique at different nitrogen flow rates. Ceram Int 45:10819–1082510.1016/j.ceramint.2019.02.157 ↗
18. Zhou XW, Ouyang C (2019) Wear and Corrosive behaviors of electroless Ni-LaCl3 composites on nanoporous ATO surface of Ti substrate. J Mater Eng Perform 28:2499–251210.1007/s11665-019-04028-9 ↗
19. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19:3–2010.1557/jmr.2004.19.1.3 ↗
20. McSkimming A, Suess DLM (2021) Dinitrogen binding and activation at a molybdenum-iron-sulfur cluster. Nat Chem 13:666–67010.1038/s41557-021-00701-6 ↗
21. Zhou XW, Wu FJ, Ouyang C (2018) Electroless Ni-P Alloys on nanoporous ATO surface of Ti Substrate. J Mater Sci 53:2812–282910.1007/s10853-017-1686-1 ↗
22. Chen J, Bull SJ (2009) Relation between the ratio of elastic work to the total work of indentation and the ratio of hardness to Young’s modulus for a perfect conical tip. J Mater Res 24:590–59810.1557/jmr.2009.0086 ↗
23. Cheng YH, Browne T, Heckerman B (2010) Mechanical and tribological properties of TiN/Ti multilayer coating. Surf Coat Technol 205:146–15110.1016/j.surfcoat.2010.06.023 ↗
24. Zhou XW, Wang YX (2019) LaCl3-modified Ni deposits on 3D-heterotypic porous Ti surface for strengthening its mechanical and electrochemical properties. Surf Coat Technol 375:652–66910.1016/j.surfcoat.2019.07.063 ↗
25. Flore M, Mubl S, Andrade E (2003) The relation between the plasma characteristic and the corrosion properties of TiN/Ti multilayers deposited by unbalanced magnetron sputtering. Thin Solid Films 433:217–22310.1016/S0040-6090(03)00340-7 ↗
26. Kang TW, Kim TW (1999) Structural properties of TiN films grown on stainless steel substrates by a reactive ratio frequency sputtering technique at low temperature. Appl Surf Sci 150:190–19410.1016/S0169-4332(98)00613-8 ↗
27. Lu L, Luo F, Huang Z (2018) Influence of the nitrogen flow rate on the infrared emissivity of TiNx films, Infrared. Phys Technol 88:144–148
28. Chan M-H, Lu F-H (2012) Air-based deposition and processing windows of sputtered TiN, TiNxOy, and N-doped TiOx thin films. Surf Coat Technol 210:135–14110.1016/j.surfcoat.2012.09.004 ↗
29. Zhang H, Li Z, He W (2019) Mechanical modification and damage mechanism evolution of TiN films subjected to cyclic nano-impact by adjusting N/Ti ratios. J Alloys Compd 809:151816. https://doi.org/10.1016/j.jallcom.2019.15181610.1016/j.jallcom.2019.151816 ↗
30. Yu K, Liu Y, Rios S (2013) Strengthening mechanisms of Ag/Ni immiscible multilayers with fcc/fcc interface. Surf Coat Technol 237:269–27510.1016/j.surfcoat.2013.05.051 ↗
31. Fukui D, Nakad N, Onak S (2020) Internal residual stress originated from Bain strain and its effect on hardness in Fe-Ni martensite. Acta Mater 196:660–66810.1016/j.actamat.2020.07.013 ↗
32. Chen Q, Li A, Wu G et al (2020) Structure vs chemistry: tribological behavior of TiN films in the nitrogen atmosphere. Ceram Int 46:28053–2806310.1016/j.ceramint.2020.07.300 ↗
33. Mendibide C, Steyer P, Esnouf C et al (2005) X-ray diffraction analysis of the residual stress state in PVD TiN/CrN multilayer coatings deposited on tool steel. Surf Coat Technol 200:65–16910.1016/j.surfcoat.2005.02.081 ↗
34. Chen J, Li H, Beake BD (2016) Load sensitivity in repetitive nano-impact testing of TiN and AlTiN coatings. Surf Coat Technol 308:289–29710.1016/j.surfcoat.2016.05.094 ↗
35. Buchinger J, Lfler L, Ast J et al (2020) Wagner, Fracture properties of thin film TiN at elevated temperatures. Mater Des 194:108885. https://doi.org/10.1016/j.matdes.2020.10888510.1016/j.matdes.2020.108885 ↗
36. Bemporad E, Mebastiani M, Pecchio C et al (2006) High thickness Ti/TiN multilayer thin coatings for wear resistant applications. Surf Coat Technol 201:2155–216510.1016/j.surfcoat.2006.03.042 ↗
37. Lu G, Yu L, Ju H (2020) Influence of nitrogen content on the thermal diffusivity of TiN films prepared by magnetron sputtering. Surf Eng 36:192–19810.1080/02670844.2019.1646964 ↗
38. Khan S, Chen S, Ma Y (2020) Structural and hydrophilic properties of TiN films prepared by ultrasonic atomization assisted spray method under low temperature. Surf Coat Technol 393:12584. https://doi.org/10.1016/j.surfcoat.2020.12582410.1016/j.surfcoat.2020.125824 ↗
39. Combadiere L, Machet J (1997) Reactive magnetron sputtering deposition of TiN films. II. influence of substrate temperature on the mechanical properties of the films. Surf Coat Technol 88:28–3710.1016/S0257-8972(96)02871-X ↗
40. Wu GZ, Li YJ, Brittain R et al (2022) Understanding of fracture conditions and material response in a model TiN film/stainless steel substrate system – A cross-sectional scratch test study. Surf Coat Technol 442:128340. https://doi.org/10.1016/j.surfcoat.2022.12834010.1016/j.surfcoat.2022.128340 ↗