journal article·2022-08Open access

Surface roughness and its structural orientation caused by internal microstructural changes in mechanically stressed copper conductors

Philipp Baron, Philipp Lenz, Maria Schomer, Klaus Peter Koch, Armin Wittmann, Georg Fischer

Journal of Materials Science· Volume 57· Issue 32

Abstract

Abstract In this paper, the mechanical damage behavior is investigated based on the characteristic roughness on the surface and the orientation of superficial structures. The main goal is to explore the surface roughness on mechanically loaded copper conductors as a lifetime indicator. For this purpose, copper conductors are mechanically stressed in accordance with EN 50,396 and then examined metallographically and microscopically. The microstructure examination shows that the roughness is caused by material extrusion and cracks due to work hardening in the surface area. Using confocal microscopy, it is shown for the first time that significant formation of surface roughness takes place over the service life of copper conductors. The roughness increases monotonically, but not linearly with number of cycles, due to internal microstructural processes and can be divided into three sections. First inspections of the conductor surface over lifetime show a correlation between the intensity of structures orientated 45° to the loading direction and the roughness. This phenomenon, already known from microscopic slip lines, is thus also evident in macroscopic roughness formation and is well founded by the research theory on material extrusion along dislocation lines. In summary, a lifetime determination is possible based on its developing roughness which enables the utilization as a sensor element. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Ehlenz T (2019) Multiphysikalische Betrachtung von Kabeln und Leitungen unter mechanisch-dynamischer Belastung. Dissertation, LAP, Hochschule Trier, Trier.
2. Baron P, Lenz P, Wittmann A, Fischer G (2021) Integrity-sensing based on surface roughness of copper conductors for future use in natural fiber composites. IEEE Sens Lett 5(3):1–4. https://doi.org/10.1109/LSENS.2021.306114310.1109/LSENS.2021.3061143 ↗
3. Gold G, Helmreich K (2017) A physical surface roughness model and its applications. IEEE Trans Microwave Theory Techn 65(10):3720–3732. https://doi.org/10.1109/TMTT.2017.269519210.1109/TMTT.2017.2695192 ↗
4. Hall S et al (2007) Multigigahertz causal transmission line modeling methodology using a 3-D hemispherical surface roughness approach. IEEE Trans Microwave Theory Techn 55(12):2614–2624. https://doi.org/10.1109/TMTT.2007.91007610.1109/TMTT.2007.910076 ↗
5. Huang B, Jia Q (2019) Accurate modeling of conductor rough surfaces in waveguide devices. Electronics 8(3):269. https://doi.org/10.3390/electronics803026910.3390/electronics8030269 ↗
6. Morgan SP (1949) Effect of surface roughness on eddy current losses at microwave frequencies. J Appl Phys 20(4):352–362. https://doi.org/10.1063/1.169836810.1063/1.1698368 ↗
7. Mason W (1910) The Lüders’ lines on mild steel. Proc Phys Soc London 23:305–333. https://doi.org/10.1088/1478-7814/23/1/33110.1088/1478-7814/23/1/331 ↗
8. Kiener D, Motz C, Grosinger W, Weygand D, Pippan R (2010) Cyclic response of copper single crystal micro-beams. Scripta Mater 63(5):500–503. https://doi.org/10.1016/j.scriptamat.2010.05.01410.1016/j.scriptamat.2010.05.014 ↗
9. Jia W, Fernandes J (2003) Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue–tension and tension–fatigue sequential strain paths. Mater Sci Eng, A 348(1–2):133–144. https://doi.org/10.1016/S0921-5093(02)00630-510.1016/S0921-5093(02)00630-5 ↗
10. Hussein AM, El-Awady JA (2016) Surface roughness evolution during early stages of mechanical cyclic loading. Int J Fatigue 87:339–350. https://doi.org/10.1016/j.ijfatigue.2016.02.02210.1016/j.ijfatigue.2016.02.022 ↗
11. Deutsches Institut für Normung e.V. (Hrsg.), “DIN EN 50396 (VDE 0473–396):2006–07,”
12. Huda Z (2022) Mechanical Behavior of materials. Springer International Publishing, Cham10.1007/978-3-030-84927-6 ↗
13. Cloeren Technology GmbH, CEM 1000 Blue Pulver Data Sheet. [Online]. Available: https://www.cloeren.de/media/pdf/6b/51/fd/CEM_1000_Blue_Pulver_EN.pdf
14. Nestorovic S, Markovic D, Ivanic L (2003) Influence of degree of deformation in rolling on anneal hardening effect of a cast copper alloy. Bull Mater Sci 26(6):601–604. https://doi.org/10.1007/BF0270432210.1007/BF02704322 ↗
15. Petzow G (2006) Metallographisches, keramographisches, plastographisches Ätzen. Berlin [u.a.]: Borntraeger
16. ASTM-E112 (2010) Standard-Test-Methods-for-Determining-Average-Grain-Size
17. Hosford WF (2005) Mechanical Behavior of Materials. Cambridge University Press, New York10.1017/CBO9780511810930 ↗
18. Chowdhury P, Sehitoglu H (2016) Mechanisms of fatigue crack growth - a critical digest of theoretical developments. Fatigue Fract Engng Mater Struct 39(6):652–674. https://doi.org/10.1111/ffe.1239210.1111/ffe.12392 ↗
19. Baron P, Lenz P, Wittmann A, Fischer G (2021) Oberflächenrauheit bei mechanisch belasteten Kupferleitern. In Kupfersymposium, p. 5. Available: https://www.kupferinstitut.de/wp-content/uploads/2021/11/Posterpraesentationen-Wahl-des-besten-wissenschaftliche-Posters-Kupfer-Symposium-2021_A4-1.pdf
20. Suresh S (1983) Micromechanisms of fatigue crack growth retardation following overloads. Eng Fract Mech 18(3):577–593. https://doi.org/10.1016/0013-7944(83)90051-610.1016/0013-7944(83)90051-6 ↗
21. Lenz P, Wittmann A, Fischer G (2021) Wear-level-monitoring on electrical conductors with high-frequency alternating currents. Frequenz 75(3–4):143–146. https://doi.org/10.1515/freq-2020-013610.1515/freq-2020-0136 ↗
22. Leach R (2013) Characterisation of Areal Surface Texture. Springer, Berlin Heidelberg, Berlin, Heidelberg10.1007/978-3-642-36458-7 ↗
23. Zhang ZF, Wang ZG (2008) Grain boundary effects on cyclic deformation and fatigue damage. Prog Mater Sci 53(7):1025–1099. https://doi.org/10.1016/j.pmatsci.2008.06.00110.1016/j.pmatsci.2008.06.001 ↗
24. Hinkle AR, Nöhring WG, Leute R, Junge T, Pastewka L (2020) The emergence of small-scale self-affine surface roughness from deformation. Sci Adv 6(7):eaax0847. https://doi.org/10.1126/sciadv.aax084710.1126/sciadv.aax0847 ↗