journal article·2022-05Open access

Transparent electrodes based on molybdenum–titanium–oxide with increased water stability for use as hole-transport/hole-injection components

Selina Goetz, Rachmat Adhi Wibowo, Martin Bauch, Neha Bansal, Giovanni Ligorio, Emil List-Kratochvil, Christian Linke, Enrico Franzke, Jörg Winkler, Markus Valtiner, Theodoros Dimopoulos

Journal of Materials Science· Volume 57· Issue 19

Abstract

Abstract Recently, dielectric/metal/dielectric (DMD) transparent electrodes based on MoO3 have been applied in solar cells and organic light emitting diodes, by virtue of the favourable properties of MoO3 as hole-transport/hole-injection material. However, amorphous MoO3 layers are easily dissolved in water, thus inhibiting device processing with water-based solutions. To improve the stability in water, the present study introduces DMD electrodes based on mixed molybdenum–titanium–oxide (MTO), fabricated by DC magnetron sputtering from a conductive oxide target. It is demonstrated that the addition of Ti strongly increases the stability in water, while the desirable electronic properties of MoO3, specifically the high work function and wide bandgap, are maintained. The DMD electrodes, with Ag as metal layer, were fabricated on both rigid and flexible substrates, namely glass and polyethylene terephthalate (PET). The obtained electrodes have low sheet resistance around 5 Ω/sq and high average visible transmittance well above 0.7 (including the substrate). As a result of the MTO stability, processing with water-based solutions takes place without electrode degradation. To demonstrate the process compatibility for large-scale, industrial production, the DMDs were sputter-deposited by a roll-to-roll process on a 300 mm-wide PET foil, achieving similar electrode properties with the laboratory-scale samples. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Meyer J, Hamwi S, Kröger M et al (2012) Transition metal oxides for organic electronics: energetics, device physics and applications. Adv Mater 24:5408–5427. https://doi.org/10.1002/adma.20120163010.1002/adma.201201630 ↗
2. Battaglia C, Yin X, Zheng M et al (2014) Hole selective MoOx contact for silicon solar cells. Nano Lett 14:967–971. https://doi.org/10.1021/nl404389u10.1021/nl404389u ↗
3. Li B, Ren H, Yuan H et al (2014) Room-temperature, solution-processed MoOx thin film as a hole extraction layer to substitute PEDOT/PSS in polymer solar cells. ACS Photonics 1:87–90. https://doi.org/10.1021/ph400016810.1021/ph4000168 ↗
4. Wang F, Qiao X, Xiong T, Ma D (2008) The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes. Org Electron 9:985–993. https://doi.org/10.1016/j.orgel.2008.07.00910.1016/j.orgel.2008.07.009 ↗
5. You H, Dai Y, Zhang Z, Ma D (2007) Improved performances of organic light-emitting diodes with metal oxide as anode buffer. J Appl Phys 101:1–4. https://doi.org/10.1063/1.243051110.1063/1.2430511 ↗
6. Ahmadpour M, Fernandes Cauduro AL, Méthivier C et al (2019) Crystalline molybdenum oxide layers as efficient and stable hole contacts in organic photovoltaic devices. ACS Appl Energy Mater 2:420–427. https://doi.org/10.1021/acsaem.8b0145210.1021/acsaem.8b01452 ↗
7. Cattin L, Lare Y, Makha M et al (2013) Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers. Sol Energy Mater Sol Cells 117:103–109. https://doi.org/10.1016/j.solmat.2013.05.02610.1016/j.solmat.2013.05.026 ↗
8. Lim DC, Jeong JH, Hong K et al (2018) Semi-transparent plastic solar cell based on oxide-metal-oxide multilayer electrodes. Prog Photovolt Res Appl 26:188–195. https://doi.org/10.1002/pip.296510.1002/pip.2965 ↗
9. Akdemir O, Zolfaghari Borra M, Nasser H et al (2020) MoOx/Ag/MoOx multilayers as hole transport transparent conductive electrodes for n-type crystalline silicon solar cells. Int J Energy Res 44:3098–3109. https://doi.org/10.1002/er.514510.1002/er.5145 ↗
10. Butler KT, Crespo-Otero R, Buckeridge J et al (2015) Band energy control of molybdenum oxide by surface hydration. Appl Phys Lett 107:231605. https://doi.org/10.1063/1.493746010.1063/1.4937460 ↗
11. Gwinner MC, Di PR, Vaynzof Y et al (2011) Doping of organic semiconductors using molybdenum trioxide: a quantitative time-dependent electrical and spectroscopic study. Adv Funct Mater 21:1432–1441. https://doi.org/10.1002/adfm.20100269610.1002/adfm.201002696 ↗
12. Irfan DH, Gao Y et al (2010) Energy level evolution of air and oxygen exposed molybdenum trioxide films. Appl Phys Lett 96:10–12. https://doi.org/10.1063/1.345477910.1063/1.3454779 ↗
13. Sian TS, Reddy GB (2006) Effect of stoichiometry and microstructure on hydrolysis in MoO3 films. Chem Phys Lett 418:170–173. https://doi.org/10.1016/j.cplett.2005.10.11210.1016/j.cplett.2005.10.112 ↗
14. Goetz S, Wibowo RA, Bauch M et al (2021) Fast sputter deposition of MoOx/metal/MoOx transparent electrodes on glass and PET substrates. J Mater Sci 56:9047–9064. https://doi.org/10.1007/s10853-021-05839-910.1007/s10853-021-05839-9 ↗
15. Luo Z, Miao R, Huan TD et al (2016) Mesoporous MoO3–x Material as an efficient electrocatalyst for hydrogen evolution reactions. Adv Energy Mater 6:1600528. https://doi.org/10.1002/aenm.20160052810.1002/aenm.201600528 ↗
16. Head AR, Gattinoni C, Trotochaud L et al (2019) Water (non-)interaction with MoO3. J Phys Chem C 123:16836–16842. https://doi.org/10.1021/acs.jpcc.9b0382210.1021/acs.jpcc.9b03822 ↗
17. Pourbaix M (1974) Atlas of electrochemical equilibria in aqueous solutions. National Association of Corrosion Engineers, Texas, pp 213–221
18. Greiner MT, Lu ZH (2013) Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces. NPG Asia Mater 5:e55–e16. https://doi.org/10.1038/am.2013.2910.1038/am.2013.29 ↗
19. Kim EJ, Shin J, Bak J et al (2021) Stabilizing role of Mo in TiO2–MoOx supported Ir catalyst toward oxygen evolution reaction. Appl Catal B Environ 280:119433. https://doi.org/10.1016/j.apcatb.2020.11943310.1016/j.apcatb.2020.119433 ↗
20. Chen K, Deng S, Lu Y et al (2021) Molybdenum-doped titanium dioxide supported low-Pt electrocatalyst for highly efficient and stable hydrogen evolution reaction. Chinese Chem Lett 32:765–769. https://doi.org/10.1016/j.cclet.2020.05.03010.1016/j.cclet.2020.05.030 ↗
21. Khan AQ, Yuan S, Niu S et al (2017) Synthesis of molybdenum oxide-titanium dioxide nanocomposites with ultrashort laser ablation in water. Opt Express 25:A539. https://doi.org/10.1364/oe.25.00a53910.1364/oe.25.00a539 ↗
22. Khlyustova A, Sirotkin N, Titov V, Agafonov A (2021) Effect of low-temperature underwater plasma produced of new properties of Mo–Ti mixed oxide composites for electron transport layer in the dye-sensitized solar cells. J Alloys Compd 858:157664. https://doi.org/10.1016/j.jallcom.2020.15766410.1016/j.jallcom.2020.157664 ↗
23. Liu H, Lv T, Zhu C, Zhu Z (2016) Direct bandgap narrowing of TiO2/MoO3 heterostructure composites for enhanced solar-driven photocatalytic activity. Sol Energy Mater Sol Cells 153:1–8. https://doi.org/10.1016/j.solmat.2016.04.01310.1016/j.solmat.2016.04.013 ↗
24. Li N, Li Y, Li W et al (2016) One-step hydrothermal synthesis of TiO2@MoO3 core–shell nanomaterial: microstructure, growth mechanism, and improved photochromic property. J Phys Chem C 120:3341–3349. https://doi.org/10.1021/acs.jpcc.5b1075210.1021/acs.jpcc.5b10752 ↗
25. Wang C, Wu L, Wang H et al (2015) Fabrication and shell optimization of synergistic TiO2–MoO3 core–shell nanowire array anode for high energy and power density lithium-ion batteries. Adv Funct Mater 25:3524–3533. https://doi.org/10.1002/adfm.20150063410.1002/adfm.201500634 ↗
26. Xie S, Yao T, Wang J et al (2020) Coaxially integrating TiO2/MoO3 into carbon nanofibers via electrospinning towards enhanced lithium ion storage performance. ChemistrySelect 5:3225–3233. https://doi.org/10.1002/slct.20200028810.1002/slct.202000288 ↗
27. Kubiak A, Wojciechowska W, Kurc B, et al (2020) Highly crystalline TiO2-MoO3 composite materials synthesized via a template-assisted microwave method for electrochemical application. Crystals 10:493. https://doi.org/10.3390/cryst1006049310.3390/cryst10060493 ↗
28. Ebner D, Bauch M, Dimopoulos T (2017) High performance and low cost transparent electrodes based on ultrathin Cu layer. Opt Express 25:A240. https://doi.org/10.1364/OE.25.00A24010.1364/OE.25.00A240 ↗
29. Bauch M, Dimopoulos T (2016) Design of ultrathin metal-based transparent electrodes including the impact of interface roughness. Mater Des 104:37–42. https://doi.org/10.1016/j.matdes.2016.04.08210.1016/j.matdes.2016.04.082 ↗
30. Melo O De, Gonz Y, Gal P, Ruediger A (2019) Optical and electrical properties of MoO2 and MoO3 thin films prepared from the chemically driven isothermal close space vapor transport technique. J Phys Condens Matter 31:295703. https://doi.org/10.1088/1361-648X/ab18e210.1088/1361-648X/ab18e2 ↗
31. Vos MFJ, Macco B, Thissen NFW et al (2016) Atomic layer deposition of molybdenum oxide from (NtBu)2 (NMe2)2 Mo and O2 plasma. J Vac Sci Technol A Vac Surf Film 34:01A103. https://doi.org/10.1116/1.493016110.1116/1.4930161 ↗
32. Stelling C, Singh CR, Karg M et al (2017) Plasmonic nanomeshes: Their ambivalent role as transparent electrodes in organic solar cells. Sci Rep 7:1–13. https://doi.org/10.1038/srep4253010.1038/srep42530 ↗
33. Sarkar S, Gupta V, Kumar M et al (2019) Hybridized guided-mode resonances via colloidal plasmonic self-assembled grating. ACS Appl Mater Interfaces 11:13752–13760. https://doi.org/10.1021/acsami.8b2053510.1021/acsami.8b20535 ↗
34. Siefke T, Kroker S, Pfeiffer K et al (2016) Materials pushing the application limits of wire grid polarizers further into the deep ultraviolet spectral range. Adv Opt Mater 4:1780–1786. https://doi.org/10.1002/adom.20160025010.1002/adom.201600250 ↗
35. Tauc J (1968) Optical properties and electronic structure of amorphous Ge and Si. Mater Res Bull 3:37–46. https://doi.org/10.1016/0025-5408(68)90023-810.1016/0025-5408(68)90023-8 ↗
36. Tauc J, Grigorovici R, Vancu A (1966) Optical properties and electronic structure of amorphous germanium. Phys Status Solidi 15:627–637. https://doi.org/10.1002/pssb.1966015022410.1002/pssb.19660150224 ↗
37. Qu Q, Zhang WB, Huang K, Chen HM (2017) Electronic structure, optical properties and band edges of layered MoO3: a first-principles investigation. Comput Mater Sci 130:242–248. https://doi.org/10.1016/j.commatsci.2017.01.01410.1016/j.commatsci.2017.01.014 ↗
38. Vasilopoulou M, Douvas AM, Georgiadou DG et al (2012) The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics. J Am Chem Soc 134:16178–16187. https://doi.org/10.1021/ja302690610.1021/ja3026906 ↗
39. Landmann M, Köhler T, Köppen S et al (2012) Fingerprints of order and disorder in the electronic and optical properties of crystalline and amorphous TiO2. Phys Rev B Condens Matter Mater Phys 86:24–28. https://doi.org/10.1103/PhysRevB.86.06420110.1103/PhysRevB.86.064201 ↗
40. Goetz S, Mehanni D, Bansal N et al (2021) Low-temperature-processed transparent electrodes based on compact and mesoporous titanium oxide layers for flexible perovskite solar cells. ACS Appl Energy Mater. https://doi.org/10.1021/acsaem.1c0112910.1021/acsaem.1c01129 ↗
41. Julien C, Khelfa A, Hussain OM, Nazri GA (1995) Synthesis and characterization of flash-evaporated MoO3 thin films. J Cryst Growth 156:235–244. https://doi.org/10.1016/0022-0248(95)00269-310.1016/0022-0248(95)00269-3 ↗
42. Scanlon DO, Watson GW, Payne DJ et al (2010) Theoretical and experimental study of the electronic structures of MoO3 and MoO2. J Phys Chem C 114:4636–4645. https://doi.org/10.1021/jp909317210.1021/jp9093172 ↗
43. Hu B, Mai L, Chen W, Yang F (2009) From MoO3 nanobelts to MoO2 nanorods: structure transformation and electrical transport. ACS Nano 3:478–482. https://doi.org/10.1021/nn800844h10.1021/nn800844h ↗
44. Haacke G (1976) New figure of merit for transparent conductors. J Appl Phys 47:4086–4089. https://doi.org/10.1063/1.32324010.1063/1.323240 ↗
45. Fleisch TH, Mains GJ (1982) An XPS study of the UV reduction and photochromism of MoO3 and WO3. J Chem Phys 76:780–786. https://doi.org/10.1063/1.44304710.1063/1.443047 ↗
46. Diebold U, Madey TE (1996) TiO2 by XPS. Surf Sci Spectra 4:227–231. https://doi.org/10.1116/1.124779410.1116/1.1247794 ↗
47. Malherbe JB, Hofmann S, Sanz JM (1986) Preferential sputtering of oxides: a comparison of model predictions with experimental data. Appl Surf Sci 27:355–365. https://doi.org/10.1016/0169-4332(86)90139-X10.1016/0169-4332(86)90139-X ↗
48. Naguib HM, Kelly R (1972) On the increase in the electrical conductivity of MoO3 and V2O5 following ion bombardment. Studies on bombardment-enhanced conductivity-I. J Phys Chem Solids 33:1751–1759. https://doi.org/10.1016/S0022-3697(72)80469-410.1016/S0022-3697(72)80469-4 ↗
49. Tsui B-Y, Huang C-F (2003) Wide range work function modulation of binary alloys for MOSFET application. IEEE Electron Device Lett 24:153–155. https://doi.org/10.1109/LED.2003.80952810.1109/LED.2003.809528 ↗
50. Kashiwaya S, Morasch J, Streibel V et al (2018) The Work Function of TiO2. Surfaces 1:73–89. https://doi.org/10.3390/surfaces101000710.3390/surfaces1010007 ↗
51. Meyer J (2011) Electronic structure of molybdenum-oxide films and associated charge injection mechanisms in organic devices. J Photonics Energy 1:011109. https://doi.org/10.1117/1.355508110.1117/1.3555081 ↗
52. Cauduro ALF, Dos Reis R, Chen G et al (2017) Crystalline molybdenum oxide thin-films for application as interfacial layers in optoelectronic devices. ACS Appl Mater Interfaces 9:7717–7724. https://doi.org/10.1021/acsami.6b1422810.1021/acsami.6b14228 ↗
53. Rietwyk KJ, Keller DA, Ginsburg A et al (2019) Universal work function of metal oxides exposed to air. Adv Mater Interfaces 6:1802058. https://doi.org/10.1002/admi.20180205810.1002/admi.201802058 ↗
54. Chiba K, Nakatani K (1984) Photoenhance migration of silver atoms in transparent heat mirror coatings. Thin Solid Films 112:359–367. https://doi.org/10.1016/0040-6090(84)90463-210.1016/0040-6090(84)90463-2 ↗
55. Cattin L, Jouad E, Stephant N et al (2017) Dielectric/metal/dielectric alternative transparent electrode: observations on stability/degradation. J Phys D Appl Phys 50:375502. https://doi.org/10.1088/1361-6463/aa7dfd10.1088/1361-6463/aa7dfd ↗
56. Noguera C (1996) Physics and chemistry at oxide surfaces. Cambridge University Press, Cambridge, pp 160–20110.1017/CBO9780511524301 ↗