journal article·2022-02

Effect of La–O–S complex inoculant on microstructure and mechanical characteristics of ductile iron

Junwei Feng, Xueshan Du, Yufu Sun, Kang Zhao, Zhiwen Shi, Mengyu Liu

Journal of Materials Science· Volume 57· Issue 8
Publisher page

Abstract

The effects of rare-earth (RE) inoculants are excellent, but RE is rare and expensive. Consequently, it is necessary to choose other elements to reduce the use of RE. In this paper, research was done to investigate the effects of different content La–O–S complex inoculant on the microstructure and mechanical characteristics of ductile iron (DI) through SEM, EDS, XRD, etc. Studies have shown that the as-cast structures of the samples are graphite nodules, ferrites, and a few pearlites. The graphite core consists of oxides (Al2O3, SiO2, Fe2O3), sulfides (La2S3, LaS), and XO·SiO2·Al2O3 silicate (X: Ca, Ba, Sr). The amount of graphite nodules increases firstly and then slightly decreases, ferrite increases gradually, and pearlite decreases by degrees with the increase in S or O content, which makes the Brinell hardness and tensile strength of the sample decrease, and the elongation of the sample slightly decreases after increasing. When both O and S are 0.3%, mechanical characteristics of the samples are best, Brinell hardness is 163.3 BHW, tensile strength is 513 MPa, and elongation is 16.1%.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Xu J, Wang WY, Xie JP, Li JW, Wang AQ (2010) Structure and properties of ductile iron strengthened by laser surface alloying. Adv Mater Res 105:413–416. https://doi.org/10.4028/www.scientific.net/AMR.105-106.41310.4028/www.scientific.net/AMR.105-106.413 ↗
2. Fatahalla N, Hakim HAA, Abo-El-Ezz A, Mohamed M (1996) Effect of the percentage carbon equivalent on the nodule characteristics, density and modulus of elasticity of ductile cast iron. J Mater Sci 31:4933–4937. https://doi.org/10.1007/BF0035588310.1007/BF00355883 ↗
3. Shamanian M, Mousavi Abarghouie SMR, Mousavi Pour SR (2010) Effects of surface alloying on microstructure and wear behavior of ductile iron. Mater Des 31(6):2760–2766. https://doi.org/10.1016/j.matdes.2010.01.01710.1016/j.matdes.2010.01.017 ↗
4. Liu XB, Takamori S, Osawa Y (2007) Effect of matrix structure on ultrasonic attenuation of ductile cast iron. J Mater Sci 42:179–184. https://doi.org/10.1007/s10853-006-0845-610.1007/s10853-006-0845-6 ↗
5. Refaey A, Fatahalla N (2003) Effect of microstructure on properties of ADI and low alloyed ductile iron. J Mater Sci 38:351–362. https://doi.org/10.1023/A:102117790259610.1023/A:1021177902596 ↗
6. Melado AC, Nishikawa A, Goldenstein H, Giles MA, Reed PAS (2017) Effect of microstructure on fatigue behavior of advanced high strength ductile cast iron produced by quenching and partitioning process. Int J Fatigue 104:397–407. https://doi.org/10.1016/j.ijfatigue.2017.07.00910.1016/j.ijfatigue.2017.07.009 ↗
7. Borsato T, Ferro P, Berto F, Carollo C (2017) Fatigue strength improvement of heavy-section pearlitic ductile iron castings by in-mould inoculation treatment. Int J Fatigue 102:221–227. https://doi.org/10.1016/j.ijfatigue.2017.02.01210.1016/j.ijfatigue.2017.02.012 ↗
8. Boulifa I, Hadji A (2021) Study of the Influence of alloying elements on the mechanical characteristics and wear behavior of a ductile cast iron. Frattura ed Integrita Strutturale 56:74–83. https://doi.org/10.3221/IGF-ESIS.56.0610.3221/IGF-ESIS.56.06 ↗
9. Mourad M, El-Hadad S, Ibrahim M (2020) Influence of inoculant type on the microstructure characteristics and mechanical properties of ductile iron. Trans Indian Inst Metal 73:1027–1041. https://doi.org/10.1007/s12666-020-01929-510.1007/s12666-020-01929-5 ↗
10. Riposan I, Stan S, Uta V, Stefan I (2017) Cast iron inoculation enhanced by supplementary oxy-sulfides forming elements. J Mater Eng Perform 26:4217–4226. https://doi.org/10.1007/s11665-017-2869-210.1007/s11665-017-2869-2 ↗
11. Avduinovic H, Gigovi-Geki A, Cubela D, Sunulahpasic R, Mujezinovic N (2015) Influence of inoculation methods and the amount of an added inoculant on the mechanical properties of ductile iron. Mater Technol 49:833–836. https://doi.org/10.17222/mit.2014.24810.17222/mit.2014.248 ↗
12. Alonso G, Stefanescu DM, De la Fuente E, Pello L, Suarez R (2018) The influence of trace elements on the nature of the nuclei of the graphite in ductile iron. Mater Sci Forum 925:78–85. https://doi.org/10.4028/www.scientific.net/MSF.925.7810.4028/www.scientific.net/MSF.925.78 ↗
13. Labrecque C, Gagne M (1998) Ductile Iron: fifty years of continuous development. Can J Metall Mater Sci 37:343–378. https://doi.org/10.1179/cmq.1998.37.5.34310.1179/cmq.1998.37.5.343 ↗
14. Choi JO, Kim JY, Choi CO, Kim JK, Rohatgi PK (2004) Effect of rare earth element on microstructure formation and mechanical properties of thin wall ductile iron castings. Mater Sci Eng A 383:323–333. https://doi.org/10.1016/j.msea.2004.04.06010.1016/j.msea.2004.04.060 ↗
15. Ferro P, Fabrizi A, Cervo R, Carollo C (2013) Effect of inoculant containing rare earth metals and bismuth on microstructure and mechanical properties of heavy-section near-eutectic ductile iron castings. J Mater Process Technol 213:1601–1608. https://doi.org/10.1016/j.jmatprotec.2013.03.01210.1016/j.jmatprotec.2013.03.012 ↗
16. Riposan I, Uta V, Firican M, Stan S, Chisamera M, Naro R, Williams D (2015) World crisis of rare earth-inoculants enhancer solution for ductile iron production. Advanced Mater Res 1114:100–111. https://doi.org/10.4028/www.scientific.net/AMR.1114.10010.4028/www.scientific.net/AMR.1114.100 ↗
17. Riposan I, Chisamera M, Uta V, Stan S (2014) The importance of rare earth contribution from nodulizing alloys and their subsequent effect on the inoculation of ductile Iron. Int J Metal Cast 8:65–80. https://doi.org/10.1007/BF0335558310.1007/BF03355583 ↗
18. Riposan I, Uta V, Stan S (2017) Inoculant enhancer to increase the potency of Ca-FeSi alloy in ductile cast iron. Metall Res Technol 114(4):416. https://doi.org/10.1051/metal/201704110.1051/metal/2017041 ↗
19. Zhou WJ, Xu GQ (2013) Effect of inoculant with S–O–Ce addition on microstructure and mechanical performance of ductile iron. Modern Cast Iron 33(05):15–18. https://doi.org/10.3969/j.issn.1003-8345.2013.05.00110.3969/j.issn.1003-8345.2013.05.001 ↗
20. Wang W, Yu HS, Chen DW (2010) Development of a new type of ductile iron inoculant. Hot Work Technol 39(23):31–33
21. Upadhyaya R, Singh KK (2018) Effect of some inoculants on the structure and properties of thin wall ductile iron. Mater Today: Proc 5(2):3595–3601. https://doi.org/10.1016/j.matpr.2017.11.60910.1016/j.matpr.2017.11.609 ↗
22. Ojo SS, Riposan I (2012) Alloy selection for in mould inoculation to control chill width in ductile iron. Mater Sci Technol 28(5):576–581. https://doi.org/10.1179/1743284711Y.000000011710.1179/1743284711Y.0000000117 ↗
23. Chen PH, Ke ZM (2019) Effect of the addition amount of sulfur oxygen inoculant on the microstructure and property of ductile iron. China Foundry Machinery & Technol 54(3):34–37. https://doi.org/10.3969/j.issn.1006-9658.2019.03.00610.3969/j.issn.1006-9658.2019.03.006 ↗
24. GB/T 1348–2019, Spheroidal graphite iron castings. (China Standard Press, Beijing:7–11)
25. GB/T 231–2009, Metallic materials–brinell hardness test-Part 4: Tables of hardness values. (China Standard Press, Beijing)
26. Joshua P (2013) Mechanical Testing of Materials. Mechanical Properties of Materials. Springer, Dordrecht
27. GB/T 9441–2009, Metallographic test for spheroidal graphite cast iron. (China Standard Press, Beijing)
28. Huang XH (2013) Principles of iron and steel metallurgy. Met Industry Press, Beijing
29. Shen ZQ, Tian XL, Zheng HL, Li TT, Xu Y, Xu RF, Zhang N (2012) Phase composition and nucleation mechanism of spheroidal graphite nucleus in ductile iron. Foundry 61(4):357–361
30. Tartera J, Llorca-Lsern N, Marsal M, Puig M, Español M (1999) Confocal microscope observation of graphite morphology. Int J Cast Met Res 11:459–464. https://doi.org/10.1080/13640461.1999.1181931710.1080/13640461.1999.11819317 ↗
31. Skaland T, Grong Ø, Grong T (1993) A model for the graphite formation in ductile cast iron part i inoculation mechanisms. Metall Trans A 24:2321–2345. https://doi.org/10.1007/BF0264860510.1007/BF02648605 ↗
32. Mittemeijer EJ (2010) Phase equilibria. Fundamentals of materials science. Springer, Berlin, Heidelberg, pp 303–33710.1007/978-3-642-10500-5_7 ↗
33. Vicente AD, Moreno JRS, Santos TFD, Espinosa DCR, Tenorio JAS (2018) Nucleation and growth of graphite particles in ductile cast iron. J Alloy Compd 775:1230–1234. https://doi.org/10.1016/j.jallcom.2018.10.13610.1016/j.jallcom.2018.10.136 ↗
34. Hao SJ (1988) A discussion on the formation mechanism of spheroidal graphite in ductile cast iron. Nat Sci Edn 2:54–60. https://doi.org/10.19721/j.cnki.1671-8879.1988.02.00710.19721/j.cnki.1671-8879.1988.02.007 ↗
35. Ramadan M, El-Bagoury N, Fathy N, Waly MA, Nofal AA (2011) Microstructure, fluidity, and mechanical properties of semi-solid processed ductile iron. J Mater Sci 46:4013–4019. https://doi.org/10.1007/s10853-011-5329-710.1007/s10853-011-5329-7 ↗