journal article·2021-07

Microwave-assisted fracture toughness improvement in additively manufactured polylactic acid–copper composite

N. Haque, M. Y. Azarfam, H. Noori

Journal of Materials Science· Volume 56· Issue 19
Publisher page

Abstract

The composition variation in composites' structure can be customized to expand their applications for antennae, capacitors, and heat transfer devices. In this study, a fused deposition modeling technique was utilized to customize composition variation in a polylactic acid–copper composite structure. The significant differences in constituents' thermal properties can induce defects and residual stresses, limiting composites' fracture toughness. This property can be improved by post-manufacturing processes such as microwave-assisted heat treatment of composites containing constituents with different dielectric properties. In this work, samples involving a composite part sandwiched between two symmetrical polymer sections were additively manufactured. The composite layers were deposited after selective impregnation of a polylactic acid filament surface with micro-size copper particles. Four sets of manufactured samples were exposed to a 2.45 GHz microwave with 3 kW power for 30, 60, 75, and 90 s. The tensile fracture test results showed that 75 s of exposure improved the interlayer fracture toughness of composites significantly by 37%, the highest among all treatment conditions. Based on microscopy and thermal analysis, it was discussed that decreasing the size of microvoids in the layers, the percentage of polymer crystallinity, and residual stress would benefit fracture toughness of exposed composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Larimore Z, Jensen S, Good A, Lu A, Suarez J, Mirotznik M (2018) Additive manufacturing of Luneburg lens antennas using space-filling curves and fused filament fabrication. IEEE Trans Antennas Propag 66:2818–2827. https://doi.org/10.1109/TAP.2018.28238110.1109/TAP.2018.282381 ↗
2. Kong M, Shin G, Lee SH, Yoon IJ (2016) Electrically small folded spherical helix antennas using copper strips and 3D printing technology. Electron Lett 52:994–996. https://doi.org/10.1049/el.2016.098210.1049/el.2016.0982 ↗
3. Hasni U, Green R, Filippas AV, Topsakal E (2019) One-step 3D-printing process for microwave patch antenna via conductive and dielectric filaments. Microw Opt Technol Lett 61:734–740. https://doi.org/10.1002/mop.3160710.1002/mop.31607 ↗
4. Lou Q, Wu R (2018) Integrated printing stereo antenna with dual materials 3D printing technology. Electron Lett 54:118–120. https://doi.org/10.1049/el.2017.408710.1049/el.2017.4087 ↗
5. Kyovtorov V, Georgiev I, Margenov S, Stoychev D, Oliveri F, Tarchi D (2017) New antenna design approach—3D polymer printing and metallization: experimental test at 14–18 GHz. Int J Electron Commun (AEÜ) 73:119–128. https://doi.org/10.1016/j.aeue.2016.12.01710.1016/j.aeue.2016.12.017 ↗
6. Tak J, Kang DG, Choi J (2017) A lightweight waveguide horn antenna made via 3D printing and conductive spray coating. Microw Opt Technol Lett 59:727–729. https://doi.org/10.1002/mop10.1002/mop ↗
7. Areir M, Xu Y, Harrison D, Fyson J, Zhang R (2018) Development of 3D printing technology for the manufacture of flexible electric double-layer capacitors. Mater Manuf Process 33(8):905–911. https://doi.org/10.1080/10426914.2017.140171210.1080/10426914.2017.1401712 ↗
8. Fan Z, Wei C, Yu L, Xia Z, Cai J, Tian Z, Zou G, Dou SX, Sun J (2020) 3D printing of porous nitrogen-doped Ti3C2 MXene scaffolds for high-performance sodium-ion hybrid capacitors. ACS Nano 14(1):867–876. https://doi.org/10.1021/acsnano.9b0803010.1021/acsnano.9b08030 ↗
9. Wang G, Gu Y, Zhao L, Xuan J, Zeng G, Tang Z, Sun Y (2019) Experimental and numerical investigation of fractal-tree-like heat exchanger manufactured by 3D printing. Chem Eng Sci 195:250–261. https://doi.org/10.1016/j.ces.2018.07.02110.1016/j.ces.2018.07.021 ↗
10. Zhuang Y, Song W, Ning G, Sun X, Sun Z, Xu G, Zhang B, Chen Y, Tao S (2017) 3D–printing of materials with anisotropic heat distribution using conductive polylactic acid composites. Mater Des 126:135–140. https://doi.org/10.1016/j.matdes.2017.04.04710.1016/j.matdes.2017.04.047 ↗
11. Wang X, Jiang M, Zhou Z, Gou J, Hui D (2017) 3D printing of polymer matrix composites: a review and prospective. Compos B 110:442–458. https://doi.org/10.1016/j.compositesb.2016.11.03410.1016/j.compositesb.2016.11.034 ↗
12. Hwang S, Reyes EI, Moon KS, Rumpf RC, Kim NS (2015) Thermo-mechanical characterization of metal/polymer composite filaments and printing parameter study for fused deposition modeling in the 3D printing process. J Electron Mater 44:771–777. https://doi.org/10.1007/s11664-014-3425-610.1007/s11664-014-3425-6 ↗
13. Masood SH, Song WQ (2004) Development of new metal/polymer materials for rapid tooling using Fused deposition modelling. Mater Des 25:587–594. https://doi.org/10.1016/j.matdes.2004.02.00910.1016/j.matdes.2004.02.009 ↗
14. Ning F, Cong W, Qiu J, Wei J, Wang S (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos B 80:369–378. https://doi.org/10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
15. Nikzad M, Masood SH, Sbarski I (2011) Thermo-mechanical properties of a highly filled polymeric composites for fused deposition modeling. Mater Des 32:3448–3456. https://doi.org/10.1016/j.matdes.2011.01.05610.1016/j.matdes.2011.01.056 ↗
16. Baca D, Ahmad R (2020) The impact on the mechanical properties of multi-material polymers fabricated with a single mixing nozzle and multi-nozzle systems via fused deposition modeling. Int J Adv Manuf Technol 106:4509–4520. https://doi.org/10.1007/s00170-020-04937-310.1007/s00170-020-04937-3 ↗
17. Espalin D, Alberto Ramirez J, Medina F, Wicker R (2014) Multi-material, multi-technology FDM: exploring build process variations. Rapid Prototyp J 20(3):236–244. https://doi.org/10.1108/RPJ-12-2012-011210.1108/RPJ-12-2012-0112 ↗
18. Boyle BM, Xiong PT, Mensch TE, Werder TJ, Miyake GM (2019) 3D printing using powder melt extrusion. Addit Manuf. https://doi.org/10.1016/j.addma.2019.10081110.1016/j.addma.2019.100811 ↗
19. Li N, Link G, Jelonnek J (2020) Rapid 3D microwave printing of continuous carbon fiber reinforced plastics. CIRP Ann Manuf Technol 69:221–224. https://doi.org/10.1016/j.cirp.2020.04.05710.1016/j.cirp.2020.04.057 ↗
20. Shelef A, Jerby E (2020) Incremental solidification (toward 3D-printing) of metal powders by transistor-based microwave applicator. Mater Des 185:108234. https://doi.org/10.1016/j.matdes.2019.10823410.1016/j.matdes.2019.108234 ↗
21. Muthukrishnan S, Ramakrishnan S, Sanjayan J (2020) Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing. Constr Build Mater 265:120786. https://doi.org/10.1016/j.conbuildmat.2020.12078610.1016/j.conbuildmat.2020.120786 ↗
22. Gabriel C, Gabriel S, Grant EH, Halstead SJB, Mingos MPD (1998) Dielectric parameters relevant to microwave dielectric heating. Chem Soc Rev 27(3):213–224. https://doi.org/10.1039/A827213Z10.1039/A827213Z ↗
23. Mishra RR, Sharma AK (2016) Microwave–material interaction phenomena: heating mechanisms, challenges and opportunities in material processing. Compos A Appl Sci Manuf 81:78–97. https://doi.org/10.1016/j.compositesa.2015.10.03510.1016/j.compositesa.2015.10.035 ↗
24. Roy R, Agrawal D, Cheng J, Gedevanishvili S (1999) Full sintering of powdered-metal bodies in a microwave field. Nature 399:668–670. https://doi.org/10.1038/2139010.1038/21390 ↗
25. Rybakova KI, Semenov VE, Egorov SV, Eremeev AG, Plotnikov IV, Bykov YuV (2006) Microwave heating of conductive powder materials. J Appl Phys 99(2):023506. https://doi.org/10.1063/1.215907810.1063/1.2159078 ↗
26. Horikoshi S, Schiffmann RF, Fukushima J, Serpone N (2018) Microwave materials processing in solid media, microwave chemical and materials processing: a tutorial. Springer, Singapore10.1007/978-981-10-6466-1 ↗
27. Cheng J, Roy R, Agrawal D (2001) Experimental proof of major role of magnetic field losses in microwave heating of metal and metallic composites. J Mater Sci Lett 20:1561–1563. https://doi.org/10.1023/A:101790021447710.1023/A:1017900214477 ↗
28. Ignatenko M, Tanaka M, Sato M (2009) Absorption of microwave energy by a spherical nonmagnetic metal particle. Jpn J Appl Phys 48:067001. https://doi.org/10.1143/JJAP.48.06700110.1143/JJAP.48.067001 ↗
29. Dichtl C, Sippel P, Krohns S (2017) Dielectric properties of 3D printed polylactic acid. Adv Mater Sci Eng 2017:6913835. https://doi.org/10.1155/2017/691383510.1155/2017/6913835 ↗
30. ASTM International (2017) D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. https://doi.org/10.1520/D3039_D3039M-1710.1520/D3039_D3039M-17 ↗
31. Fischer EW, Sterzel HJ, Wegner G (1973) Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions. Kolloid-Z.u.Z.Polymere, 251:980–990. https://doi.org/10.1007/BF0149892710.1007/BF01498927 ↗
32. Fambri L, Migliaresi C (2010) Crystallization and thermal properties. In: Grossman RF, Nwabunma D, Auras R, Lim LT, Selke SEM, Tsuji H (eds) Poly(Lactic Acid): synthesis, structures, properties, processing, and applications. John Wiley & Sons Inc, New Jersey, pp 113–12410.1002/9780470649848.ch9 ↗
33. Park SD, Todo M, Arakawa K, Koganemaru M (2006) Effect of crystallinity and loading-rate on mode I fracture behavior of poly(lactic acid). Polymer 47(4):1357–1363. https://doi.org/10.1016/j.polymer.2005.12.04610.1016/j.polymer.2005.12.046 ↗