journal article·2017-07

Carbon paper-free membrane electrode assembly fabricated from a Pt electrocatalyst supported on multi-walled carbon nanotubes

Fang Luo, Ying Ling, Quan Zhang, Xinxin Yu, Qingting Liu, Zehui Yang

Journal of Materials Science· Volume 52· Issue 14
Publisher page

Abstract

We described a new concept, carbon paper-free membrane electrode assembly (MEA) fabricated from Nafion membrane and multi-walled carbon nanotubes-based electrocatalyst, in which platinum nanoparticles were deposited on carbon nanotubes after coating with pyridine–polybenzimidazole (PyPBI). Polymer-coated carbon nanotubes served as platinum nanoparticles support and current collector in carbon paper-free MEA. The fabricated carbon paper-free MEA was systematically studied by in situ cyclic voltammetry, SEM and fuel cell test. Pt utilization efficiency of carbon paper-free MEA improved with decreasing in Pt loading and reached 62% with 0.1 mgPt cm−2. Meanwhile, the mass power density reached 1.1 W mg Pt −1 , which was comparable to that of MEA with carbon paper. Fuel cell performance maintained 50% after 100000 startup–shutdown cycles, suggesting that carbon paper-free MEA was applicable in real fuel cell operation. To the best of our knowledge, this is the first study of carbon paper-free MEA in polymer electrolyte fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Winter M, Brodd RJ (2004) What are batteries, fuel cells, and supercapacitors? Chem Rev 104:4245–427010.1021/cr020730k ↗
2. Yang Z, Moriguchi I, Nakashima N (2015) Durable Pt electrocatalyst supported on a 3D nanoporous carbon shows high performance in a high-temperature polymer electrolyte fuel cell. ACS Appl Mater Interfaces 7:9800–980610.1021/acsami.5b01724 ↗
3. Yang Z, Moriguchi I, Nakashima N (2016) A highly-durable CO-tolerant poly(vinylphosphonic acid)-coated electrocatalyst supported on a nanoporous carbon. ACS Appl Mater Interfaces 8:9030–903610.1021/acsami.5b06826 ↗
4. Yang Z, Kim C, Hirata S, Fujigaya T, Nakashima N (2015) Facile enhancement in CO-tolerance of a polymer-coated Pt electrocatalyst supported on carbon black: comparison between vulcan and ketjenblack. ACS Appl Mater Interfaces 7:15885–1589110.1021/acsami.5b03371 ↗
5. Yang Z, Yu X, Zhang Y, Xu G (2016) Remarkably durable platinum cluster supported on multi-walled carbon nanotubes with high performance in an anhydrous polymer electrolyte fuel cell. RSC Adv 6:108158–10816310.1039/C6RA19487G ↗
6. Du S, Lu Y, Malladi SK, Xu Q, Steinberger-Wilckens R (2014) A simple approach for PtNi-MWCNT hybrid nanostructures as high performance electrocatalysts for the oxygen reduction reaction. J Mater Chem A 2:692–69810.1039/C3TA13608F ↗
7. Gharibi H, Golmohammadi F, Kheirmand M (2013) Fabrication of MEA based on optimum amount of Co in PdxCo/C alloy nanoparticles as a new cathode for oxygen reduction reaction in passive direct methanol fuel cells. Electrochim Acta 89:212–22110.1016/j.electacta.2012.10.147 ↗
8. Choi R, Choi S-I, Choi CH et al (2013) Designed synthesis of well-defined Pd@Pt core-shell nanoparticles with controlled shell thickness as efficient oxygen reduction electrocatalysts. Chem Eur J 19:8190–819810.1002/chem.201203834 ↗
9. Sun X, Li D, Ding Y et al (2014) Core/shell Au/CuPt nanoparticles and their dual electrocatalysis for both reduction and oxidation reactions. J Am Chem Soc 136:5745–574910.1021/ja500590n ↗
10. Wu G, More KL, Johnston CM, Zelenay P (2011) High-performance electrocatalysts for oxygen reduction derived from polyaniline, iron, and cobalt. Science 332:443–44710.1126/science.1200832 ↗
11. Lim D-H, Choi D-H, Lee W-D, Lee H-I (2009) A new synthesis of a highly dispersed and CO tolerant PtSn/C electrocatalyst for low-temperature fuel cell; its electrocatalytic activity and long-term durability. Appl Catal B 89:484–48910.1016/j.apcatb.2009.01.011 ↗
12. Guo Z, Xu X, Xiang Y, Lu S, Jiang SP (2015) New anhydrous proton exchange membranes for high-temperature fuel cells based on PVDF-PVP blended polymers. J Mater Chem A 3:148–15510.1039/C4TA04952G ↗
13. He D, Cheng K, Li H et al (2012) Highly active platinum nanoparticles on graphene nanosheets with a significant improvement in stability and CO tolerance. Langmuir 28:3979–398610.1021/la2045493 ↗
14. Ahmad H, Kamarudin SK, Hasran UA, Daud WRW (2011) A novel hybrid Nafion-PBI-ZP membrane for direct methanol fuel cells. Int J Hydrog Energy 36:14668–1467710.1016/j.ijhydene.2011.08.044 ↗
15. Ainla A, Brandell D (2007) Nafion®–polybenzimidazole (PBI) composite membranes for DMFC applications. Solid State Ion 178:581–58510.1016/j.ssi.2007.01.014 ↗
16. Xu C, Wu X, Wang X, Mamlouk M, Scott K (2011) Composite membranes of polybenzimidazole and caesium-salts-of-heteropolyacids for intermediate temperature fuel cells. J Mater Chem 21:6014–601910.1039/c1jm10093a ↗
17. Mack F, Aniol K, Ellwein C, Kerres J, Zeis R (2015) Novel phosphoric acid-doped PBI-blends as membranes for high-temperature PEM fuel cells. J Mater Chem A 3:10864–1087410.1039/C5TA01337B ↗
18. Yang Z, Fujigaya T, Nakashima N (2015) A phosphoric acid-doped electrocatalyst supported on poly(para-pyridine benzimidazole)-wrapped carbon nanotubes shows a high durability and performance. J Mater Chem A 3:14318–1432410.1039/C5TA01650A ↗
19. Yang Z, Nakashima N (2015) Poly(vinylpyrrolidone)-wrapped carbon nanotube-based fuel cell electrocatalyst shows high durability and performance under non-humidified operation. J Mater Chem A 3:23316–2332210.1039/C5TA06735A ↗
20. Fang B, Chaudhari NK, Kim M-S, Kim JH, Yu J-S (2009) Homogeneous deposition of platinum nanoparticles on carbon black for proton exchange membrane fuel cell. J Am Chem Soc 131:15330–1533810.1021/ja905749e ↗
21. Frey T, Linardi M (2004) Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell performance. Electrochim Acta 50:99–10510.1016/j.electacta.2004.07.017 ↗
22. Zhang F-Y, Advani SG, Prasad AK (2008) Performance of a metallic gas diffusion layer for PEM fuel cells. J Power Sources 176:293–29810.1016/j.jpowsour.2007.10.055 ↗
23. Raso MA, Carrillo I, Navarro E, Garcia MA, Mora E, Leo TJ (2015) Fuel cell electrodes prepared by e-beam evaporation of Pt compared with commercial cathodes: electrochemical and DMFC behaviour. Int J Hydrog Energy 40:11315–1132110.1016/j.ijhydene.2015.03.125 ↗
24. Wang H, Lu S, Zhang Y, Lan F, Shang J, Xiang Y (2016) Platinum-decorated ultrafine Pd nanoparticles monodispersed on pristine graphene with enhanced electrocatalytic performance. ChemPlusChem 81:172–17510.1002/cplu.201500404 ↗
25. Wang H, Lu S, Zhang Y, Lan F, Lu X, Xiang Y (2015) Pristine graphene dispersion in solvents and its application as a catalyst support: a combined theoretical and experimental study. J Mater Chem A 3:6282–628510.1039/C5TA00359H ↗
26. Xia M, Liu Y, Wei Z et al (2013) Pd-induced Pt(IV) reduction to form Pd@Pt/CNT core@shell catalyst for a more complete oxygen reduction. J Mater Chem A 1:14443–1444810.1039/c3ta13139d ↗
27. Iiyama A, Tabuchi Y, Ohma A, Sugawara S, Shinohara K (2014) FCEV development ECS Trans 3:11–1710.1149/06403.0011ecst ↗
28. Debe MK (2012) Electrocatalyst approaches and challenges for automotive fuel cells. Nature 486:43–5110.1038/nature11115 ↗
29. Shao Y, Yin G, Gao Y (2007) Understanding and approaches for the durability issues of Pt-based catalysts for PEM fuel cell. J Power Sources 171:558–56610.1016/j.jpowsour.2007.07.004 ↗
30. Higgins DC, Meza D, Chen Z (2010) Nitrogen-doped carbon nanotubes as platinum catalyst supports for oxygen reduction reaction in proton exchange membrane fuel cells. J Phys Chem C 114:21982–2198810.1021/jp106814j ↗
31. Chen S, Wei Z, Guo L et al (2011) Enhanced dispersion and durability of Pt nanoparticles on a thiolated CNT support Chem. Commun 47:10984–10986
32. Sun S, Zhang G, Geng D et al (2010) Direct growth of single-crystal Pt nanowires on Sn@CNT nanocable: 3D electrodes for highly active electrocatalysts. Chem Eur J 16:829–83510.1002/chem.200902320 ↗
33. Chen L, Lu G (2008) Hydrothermal synthesis of size-dependent Pt in Pt/MWCNTs nanocomposites for methanol electro-oxidation. Electrochim Acta 53:4316–432310.1016/j.electacta.2007.12.076 ↗
34. Yang Z, Nakashima N (2016) An electrocatalyst based on carbon nanotubes coated with poly(vinylpyrrolidone) shows a high tolerance to carbon monoxide in a direct methanol fuel cell. ChemCatChem 8:600–60610.1002/cctc.201501060 ↗
35. Yang Z, Fujigaya T, Nakashima N (2015) Homogeneous coating of ionomer on electrocatalyst assisted by polybenzimidazole as an adhesive layer and its effect on fuel cell performance. J Power Sources 300:175–18110.1016/j.jpowsour.2015.09.069 ↗
36. Xiao L, Zhang H, Jana T et al (2005) Synthesis and characterization of pyridine-based polybenzimidazoles for high temperature polymer electrolyte membrane fuel cell applications. Fuel Cells 5:287–29510.1002/fuce.200400067 ↗
37. Yang Z, Nakashima N (2015) A simple preparation of very high methanol tolerant cathode electrocatalyst for direct methanol fuel cell based on polymer-coated carbon nanotube/platinum. Sci Rep 5:1223610.1038/srep12236 ↗
38. Yu X, Luo F, Yang Z (2016) Bottom-up design of a stable CO-tolerant platinum electrocatalyst with enhanced fuel cell performance in direct methanol fuel cells. RSC Adv 6:98861–9886610.1039/C6RA24025A ↗
39. Yang Z, Ling Y, Zhang Y, Xu G (2016) High Performance Palladium Supported on Nanoporous Carbon under Anhydrous Condition. Sci Rep 6:3652110.1038/srep36521 ↗
40. Yang Z, Nagashima A, Fujigaya T, Nakashima N (2016) Electrocatalyst composed of platinum nanoparticles deposited on doubly polymer-coated carbon nanotubes shows a high CO-tolerance in methanol oxidation reaction. Int J Hydrog Energy 41:19182–1919010.1016/j.ijhydene.2016.08.198 ↗
41. Yang Z, Yu X, Luo F (2016) Facile enhancement of the durability and CO tolerance of CB/PtRu by poly(2,5-benzimidazole) coating via in situ polymerization. RSC Adv 6:96416–9642010.1039/C6RA22775A ↗
42. Ohma A, Shinohara K, Iiyama A, Yoshida T, Daimaru A (2011) Membrane and catalyst performance targets for automotive fuel cells by FCCJ membrane, catalyst. MEA WG ECS Trans 1:775–78410.1149/1.3635611 ↗
43. Kakinuma K, Chino Y, Senoo Y et al (2013) Characterization of Pt catalysts on Nb-doped and Sb-doped SnO 2-δ support materials with aggregated structure by rotating disk electrode and fuel cell measurements. Electrochim Acta 110:316–32410.1016/j.electacta.2013.06.127 ↗
44. Savych I, Subianto S, Nabil Y, Cavaliere S, Jones D, Roziere J (2015) Negligible degradation upon in situ voltage cycling of a PEMFC using an electrospun niobium-doped tin oxide supported Pt cathode. Phy Chem Chem Phy 17:16970–1697610.1039/C5CP01542A ↗
45. Sung M-T, Chang M-H, Ho M-H (2014) Investigation of cathode electrocatalysts composed of electrospun Pt nanowires and Pt/C for proton exchange membrane fuel cells. J Power Sources 249:320–32610.1016/j.jpowsour.2013.10.119 ↗
46. Esfandiari A, Kazemeini M, Bastani D (2016) Synthesis, characterization and performance determination of an Ag@Pt/C electrocatalyst for the ORR in a PEM fuel cell. Int J Hydrog Energy 41:20720–2073010.1016/j.ijhydene.2016.09.097 ↗
47. Jafri RI, Rajalakshmi N, Dhathathreyan KS, Ramaprabhu S (2015) Nitrogen doped graphene prepared by hydrothermal and thermal solid state methods as catalyst supports for fuel cell. Int J Hydrog Energy 40:4337–434810.1016/j.ijhydene.2015.02.008 ↗
48. Su K, Yao X, Sui S, Wei Z, Zhang J, Du S (2014) Ionomer content effects on the electrocatalyst layer with in situ grown Pt nanowires in PEMFCs. Int J Hydrog Energy 39:3219–322510.1016/j.ijhydene.2013.12.117 ↗
49. Ruiz-Camacho B, Martínez-González JH, González-Huerta RG, Tufiño-Velázquez M (2014) Kinetic study of oxygen reduction reaction and PEM fuel cell performance of Pt/TiO2-C electrocatalyst. Int J Hydrog Energy 39:16731–1673910.1016/j.ijhydene.2014.02.109 ↗