journal article·2004-06

Plastic flow instabilities of L12 Ni3Al alloys at intermediate temperatures

H. Honjo, Y. Kaneno, H. Inoue, T. Takasugi

Journal of Materials Science· Volume 39· Issue 11
Publisher page

Abstract

The serrated plastic flow of L12 Ni3Al alloys at intermediate temperatures was investigated using tensile tests. The effects of temperature, strain rate and composition were examined. The serrated plastic flow accompanied by the lowest (negative) strain-rate sensitivity was observed most strongly at 673 K and at a strain rate of 3.2 × 10−4 s−1. The serrated plastic flow became more significant as the alloy departed from a stoichiometric composition. The static strain aging at 673 K resulted in a reduced flow strength. The activation energy of the serrated plastic flow was estimated to be about 66 kJ/mol, which suggests that it is smaller than that for lattice diffusion of solutes in L12 lattices. The serrated plastic flow behavior of the Ni3Al alloys was compared with that of the L12 Co3Ti and Ni3(Si,Ti) alloys, and is qualitatively explained on the basis of the dynamics of solutes in the core of dissociated screw dislocations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. T. Suzuki, Y. Mishima and S. Miura, ISIJ Int. 29 (1989) 29.10.2355/isijinternational.29.1 ↗
2. D. Caillard and A. Couret, in “Dislocations in Solids,” Vol. 10, edited by F. R. N. Nabarro and M. S. Duesberry (Elsevier, Amsterdam, 1996) Chapt. 50, p. 69.
3. D. Caillard, Mater. Sci. Eng. A 319–321 (2001) 74.10.1016/S0921-5093(00)02017-7 ↗
4. E. O. Hall, “Yield Point Phenomena in Metals and Alloys” (Plenum, New York, 1970).10.1007/978-1-4684-1860-6 ↗
5. I. Potez, G. Lapasset and L. P. Kubin, Scripta Metal. Mater. 26 (1992) 84.10.1016/0956-716X(92)90449-O ↗
6. J. F. Dinhut, T. Bonou and P. Moine, Acta Metal. 24 (1976) 445.10.1016/0001-6160(76)90065-1 ↗
7. R. Lerf and D. G. Morris, Acta Metal. Mater. 42 (1994) 1091.10.1016/0956-7151(94)90126-0 ↗
8. H. Mabuchi, K. Hirukawa, K. Katayama, H. Tsuda and Y. Nakayama, Scripta Metal. 24 (1990) 1553.10.1016/0956-716X(90)90431-F ↗
9. E. P. George, D. P. Pope, C. L. Fu and J. H. Schneibel, ISIJ Int. 31 (1991) 1063.10.2355/isijinternational.31.1063 ↗
10. T. Takasugi, S. Hirakawa, O. Izumi, S. Ono and S. Watanabe, Acta Metall. 35 (1987) 2015.10.1016/0001-6160(87)90030-7 ↗
11. T. Takasugi, S. Watanabe, O. Izumi and H. K. Fathalla, ibid. 37 (1989) 3425.10.1016/0001-6160(89)90214-9 ↗
12. T. Takasugi, H. Honjo, Y. Kaneno and H. Inoue, ibid. 50 (2002) 847.
13. H. Honjo, Y. Kaneno, H. Inoue and T. Takasugi, J. Mater. Res. 17 (2002) 705.10.1557/JMR.2002.0101 ↗
14. P. Veyssiere and G. Saada, in “Dislocations in Solids,” Vol. 10, edited by F. R. N. Nabarro and M. S. Duesbery (Amsterdam, North-Holland, 1996) Chapt. 53, p. 254.
15. D. P. Pope and S. S. Ezz, Int. Mater. Rev. 29 (1984) 136.10.1179/imr.1984.29.1.136 ↗
16. N. S. Stoloff, ibid. 34 (1989) 153.10.1179/imr.1989.34.1.153 ↗
17. M. Yamaguchi and Y. Umakoshi, Prog. Mater. Sci. 34 (1990) 1.10.1016/0079-6425(90)90002-Q ↗
18. T. Suzuki, Y. Mishima and S. Miura, ISIJ Int. 29 (1989) 1.10.2355/isijinternational.29.1 ↗
19. F. Popille, L. Kubin, J. Douin and S. Naka, Scr. Metall. 34 (1996) 977.10.1016/1359-6462(95)00609-5 ↗
20. M. Demura and T. Hirano, Phil. Mag. Letts. 75 (1997) 143.10.1080/095008397179697 ↗
21. P. H. Thornton, R. G. Davies and T. L. Johnston, Metall. Trans. 1 (1970) 207.10.1007/BF02819263 ↗
22. Y. Q. Sun and P. M. Hazzledine, Phil. Mag. A 58 (1988) 263.
23. P. Veyssiere and J. Douin, in “Intermetallic Compounds—Principles,” edited by J. H. Westbrook and R. L. Fleischer (John Wiley and Sons, New York, 1995) p. 519.
24. A. H. Cottrell, “Dislocations and Plastic Flow in Crystals” (Clarendon Press, Oxford, 1953).
25. B. H. Kear and H. G. F. Wilsdorf, Trans. Metal. Soc. AIME 224 (1962) 382.
26. S. Takeuchi and E. Kuramoto, Acta Metall. 21 (1973) 415.10.1016/0001-6160(73)90198-3 ↗
27. V. Paidar, D. P. Pope and V. Vitek, ibid. 32 (1984) 435.10.1016/0001-6160(84)90117-2 ↗
28. M. H. Yoo, Scripta Metall. 20 (1986) 915.10.1016/0036-9748(86)90466-7 ↗