journal article·2016-04

Indirect assessment of the surface energy of the Al–Cu–Fe quasicrystal

Danielle Cavalcante Guedes de Lima, Tibério Andrade Dos Passos, Marie-Cécile de Weerd, Samuel Kenzari, Rodinei Gomes Medeiros, Severino Jackson Guedes de Lima, Jean-Marie Dubois

Journal of Materials Science· Volume 51· Issue 8
Publisher page

Abstract

This work summarizes an attempt to estimate the surface energy of the stable, icosahedral Al–Cu–Fe quasicrystal (i-ACF hereafter). To this end, samples of i-ACF were prepared by sintering a powder produced by ball milling and heat treating a master ingot of composition Al59Cu25.5Fe12.5B3 (at.%), icosahedral lattice structure, and containing negligibly small amounts of contaminating crystalline phases. This powder was then sintered in the shape of a cylinder appropriate for pin-on-disk tests in ambient air. Variable amounts of either Sn or Bi were added to the powder prior to sintering. These elements do not dissolve in the quasicrystal and form small pockets of pure Sn or Bi that are either isolated or percolating, depending on the added volume of metal. Analysis of pin-on-disk data deduced from tests performed at room temperature allows us to conclude that the surface energy of the quasicrystal itself falls between the respective surface energies of the pure metals: γBi ≤ γQC ≤ γSn or 0.5 ≤ γi-ACF ≤ 0.8 J/m2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Mineralogy and Gemology Studies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Brout R, Nauenberg M (1958) Quantum theory of surface energy and tension. Phys Rev 112–5:1451–145510.1103/PhysRev.112.1451 ↗
2. Orowan E (1970) Surface energy and surface tension in solids and liquids. Proc R Soc Lond A 316(1527):473–49110.1098/rspa.1970.0091 ↗
3. Jones H (1971) The surface energy of solid metals. Met Sci 5–1:15–1810.1179/030634571790439342 ↗
4. Adams BL, Ta’Asan S, Kinderlehrer D, Livshits I, Mason DE, Wu C, Mullins WW, Rohrer GS, Rollett AD, Saylor DM (1999) Extracting grain boundary and surface energy from measurement of triple junction geometry. Interface Sci 7:321–33810.1023/A:1008733728830 ↗
5. Zenkiewicz M (2007) Methods for the calculation of surface free energy of solids. J Achiev Mater Manuf Eng 24–1:137–145
6. Vitos L, Ruban AV, Skriver HL, Kollár J (1998) The surface energy of metals. Surf Sci 411:186–20210.1016/S0039-6028(98)00363-X ↗
7. Grin J, Burkhardt U, Ellner M, Peters K (1994) Crystal structure of orthorhombic Co4Al13. J Alloys Compds 206–2:243–24710.1016/0925-8388(94)90043-4 ↗
8. Li XZ, Dong C, Dubois JM (1995) Structural study of crystalline approximants of the Al–Cu–Fe–Cr decagonal quasicrystal. J Appl Cryst 28:96–10410.1107/S0021889894009714 ↗
9. Dshemuchadse J, Jung DY, Steurer W (2011) Structural building principles of complex face centered cubic intermetallics. Acta Cryst B 67:269–29210.1107/S0108768111025390 ↗
10. Steurer W (2012) Why are quasicrystals quasiperiodic? Chem Soc Rev 41:6719–672910.1039/c2cs35063g ↗
11. Dubois JM (2012) Properties—and applications of quasicrystals and complex metallic alloys. Chem Soc Rev 41:6760–677710.1039/c2cs35110b ↗
12. Dubois JM (2005) Useful quasicrystals. World Scientific, Singapore10.1142/3585 ↗
13. Shechtman D, Blech I, Gratias D, Cahn JW (1984) Metallic phase with long-range orientational order and no translational symmetry. Phys Rev Lett 53–20:1951–195410.1103/PhysRevLett.53.1951 ↗
14. Bendersky L (1985) Quasicrystal with one-dimensional translational symmetry and a tenfold rotation axis. Phys Rev Lett 55–14:1461–146510.1103/PhysRevLett.55.1461 ↗
15. Ranganathan S, Chattopadhyay K, Alok Singh K, Kelton f (1997) Decagonal quasicrystals. Prog Mater Sci 30:195–24010.1016/S0079-6425(97)00028-5 ↗
16. Bergman C, Girardeaux C, Perrin-Pellegrino C, Gas P, Dubois JM, Rivier N (2008) Contact angles of liquid metals on quasicrystals. J Phys 20:314010
17. Dubois JM, de Weerd MC, Brenner J (2004) A way to estimate the true surface energy of complex metallic alloys. Ferroelectrics 305:159–16210.1080/00150190490462658 ↗
18. Dubois JM, Belin-Ferré E (2014) Friction and solid-solid adhesion on complex metallic alloys. Sci Technol Adv Mater 15:03480410.1088/1468-6996/15/3/034804 ↗
19. Fournée V, Ross AR, Lograsso TA, Evans JW, Thiel PA (2003) Growth of Ag thin films on complex surfaces of quasicrystals and approximant phases. Surf Sci 537:5–2610.1016/S0039-6028(03)00691-5 ↗
20. Fleury E, Kim Y-C, Kim D-H, Kim D-H, Kim W-T (2004) The toughening of Al–Cu–Fe(-B) quasicrystals by Sn particles. J Non-Cryst Solids 334–335:449–45210.1016/j.jnoncrysol.2003.12.022 ↗
21. Singh A, Tsai AP (2003) Melting behaviour of lead and bismuth nano-particles in quasicrystalline matrix—the role of interfaces. Sadhana 28(1–2):63–8010.1007/BF02717126 ↗
22. Rabinowicz E (1970) The determination of the compatibility of metals through static friction tests. In: Proceedings of the ASME/ASLE Lubrication Conference, Cincinnati, Ohio, USA, October 13–15, pp 198–205
23. Dubois JM, Proner A, Bucaille B, Cathonnet P, Dong C, Richard V, Pianelli A, Massiani Y, Ait-Yaazza S, Belin-Ferré E (1994) Plasma sprayed quasicrystalline coatings with reduced adhesion for cookware. Ann Chim 19:3–25
24. Brien V, Khare V, Herbst F, Weisbecker P, Ledeuil JB, De Weerd MC, Dubois JM (2004) Influence of boron content on the microstructure of sintered Al62.5−xCu25.3Fe12.2Bx alloys (x = 0, 3, 5). J Mater Res 19–10:2974–298010.1557/JMR.2004.0366 ↗
25. Dong C, Dubois JM, de Boissieu M, Janot C (1990) Neutron diffraction study of the peritectic growth of the Al65Cu20Fe15 icosahedral quasi-crystal. J Phys 2:6339–6360
26. Jeitschko W (1969) The crystal structure of Fe2AlB2. Acta Cryst B 25:163–16510.1107/S0567740869001944 ↗
27. Dubois JM, Brunet P, Belin-Ferré E (2000) Potential applications of quasicrystalline materials. In: Belin-Ferré E, Berger C, Quiquandonet M, Sadoc A (eds) Quasicrystals, current topics. World Scientific, Singapore, pp 498–53210.1142/9789812793201_0017 ↗
28. Spiegler R, Schmadder S, Sigl LS (1990) Fracture toughness evaluation of WC-Co alloys by indentation testing. J. Hard Mater 1–3:147–158
29. Scholz T, Schneider GA, Muñoz-Saldaña J, Swain MV (2004) Fracture toughness from submicron derived indentation cracks. Appl Phys Lett 84–16:3055–305710.1063/1.1711164 ↗
30. Kang SS, Dubois JM (1992) Compression testing of quasicrystalline materials. Philos Mag A 66–1:151–16310.1080/01418619208201520 ↗
31. Chung H-Y, Weinberger MB, Yang J-M, Tolbert SH, Kaner RB (2008) Correlation between hardness and elastic moduli of the ultra-incompressible transition metal di-borides RuB2, OsB2, and ReB2. Appl Phys Lett 92(261904):1–3
32. Musil J, Kunc F, Zeman H, Polakova H (2002) Relationships between hardness, Young’s modulus and elastic recovery in hard nanocomposite coatings. Surf Coat Technol 154:304–31310.1016/S0257-8972(01)01714-5 ↗
33. Xi-ying Zhou, Pei-yao Li, Shi-qiang Qian (2003) Evaluation of fracture toughness of Al–Cu–Fe–B quasicrystal. J Wuhan Univ Technology-Mater Sci Ed 18–3:46–4910.1007/BF02838457 ↗
34. Singer IL, Dubois JM, Soro JM, Rouxel D, von Stebut J (1998) Material transfer and surface damage in frictional contact of Al–Cu–Fe quasicrystals. In: Takeuchi S, Fujiwara T (eds) Quasicrystals. World Scientific, Singapore, pp 769–772
35. Johnson KL, Kendall K, Roberts AD (1971) Surface energy and the contact of elastic solids. Proc R Soc London A 324:301–31310.1098/rspa.1971.0141 ↗
36. Derjaguin BV, Muller VM, Toporov YP (1975) Effect of contact deformations on the adhesion of particles. J Colloid Interface Sci 53:314–32510.1016/0021-9797(75)90018-1 ↗
37. Maugis D (2000) Contact, adhesion and rupture of elastic solids, solid-state sciences. Springer-Verlag, Berlin10.1007/978-3-662-04125-3 ↗
38. Carpick RW, Ogletree DF, Salmeron M (1999) A general equation for fitting contact area and friction vs load measurements. J Colloid Interface Sci 211(2):395–40010.1006/jcis.1998.6027 ↗
39. Sales M, Merstallinger A, Brunet P, De Weerd MC, Khare V, Traxler G, Dubois JM (2006) Cold welding and fretting tests on quasicrystals and related compounds. Philos Mag 86(6–8):965–97010.1080/14786430500313838 ↗
40. Park JY, Ogletree DF, Salmeron M, Jenks CJ, Thiel PA, Brenner J, Dubois JM (2008) Friction anisotropy: a unique and intrinsic property of decagonal quasicrystals. J Mater Res 23–5:1488–149310.1557/JMR.2008.0187 ↗
41. Rabinowicz E (1961) Influence of surface energy on friction and wear phenomena. J Appl Phys 32–8:1440–144410.1063/1.1728375 ↗