journal article·2014-12Open access

Evolution of grain structure in deformed metal-polymer laminates

E. T. Faber, W.-P. Velinga, J. Th. M. De Hosson

Journal of Materials Science· Volume 49· Issue 24

Abstract

The paper examines the roughening along a metal-polymer interface, to find out whether the relevant length scale is on a sub-grain level or on the grain-size level. This is relevant for understanding the possible delamination of a polymer coating on a metallic substrate. Therefore we have investigated the local lattice orientation in heavily strained ferritic steel using electron back-scatter diffraction. From that data we have calculated the components of the local orientation gradient tensor as well as the local Schmid factor for deformation along [100] and [001] on {101} and {112} slip systems. The curvature of the draw-and-redraw steel- polyethylene terephthalate (PET) laminate interface as well as the curvature of the underlying steel lattice was examined in detail. It is concluded that roughening at a sub-grain length scale along the interface is due to plasticity in the interior of the grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Non-Destructive Testing Techniques · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Persson BNJ (2006) Contact mechanics for randomly rough surfaces. Surf Sci Rep 61:201–227. doi: 10.1016/j.surfrep.2006.04.00110.1016/j.surfrep.2006.04.001 ↗
2. Carbone G, Bottiglione F (2011) Contact mechanics of rough surfaces: a comparison between theories. Meccanica 46:557–565. doi: 10.1007/s11012-010-9315-y10.1007/s11012-010-9315-y ↗
3. Carbone G, Pierro E (2013) A review of adhesion mechanisms of mushroom-shaped microstructured adhesives. Meccanica 48:1819–1833. doi: 10.1007/s11012-013-9724-910.1007/s11012-013-9724-9 ↗
4. Beeck J, Neggers J, Schreurs PJG et al (2014) Quantification of three-dimensional surface deformation using global digital image correlation. Exp Mech 54:557–570. doi: 10.1007/s11340-013-9799-110.1007/s11340-013-9799-1 ↗
5. Stoudt MR, Hubbard JB (2005) Analysis of deformation-induced surface morphologies in steel sheet. Acta Mater 53:4293–4304. doi: 10.1016/j.actamat.2005.05.03810.1016/j.actamat.2005.05.038 ↗
6. Raabe D, Sachtleber M, Weiland H et al (2003) Grain-scale micromechanics of polycrystal surfaces during plastic straining RID A-6470-2009. Acta Mater 51:1539–1560. doi: 10.1016/S1359-6454(02)00557-810.1016/S1359-6454(02)00557-8 ↗
7. Mahmudi R, Mehdizadeh M (1998) Surface roughening during uniaxial and equi-biaxial stretching of 70-30 brass sheets. J Mater Process Technol 80–81:707–712. doi: 10.1016/S0924-0136(98)00099-510.1016/S0924-0136(98)00099-5 ↗
8. Wilson DV, Roberts WT, Rodrigues PMB (1981) Effect of grain anisotropy on limit strains in biaxial stretching: part i. influence of sheet thickness and grain size in weakly textured sheets. Metall Trans A 12:1595–1602. doi: 10.1007/BF0264356510.1007/BF02643565 ↗
9. Wouters O, Vellinga WP, Van Tijum R, De Hosson JTM (2006) Effects of crystal structure and grain orientation on the roughness of deformed polycrystalline metals. Acta Mater 54:2813–2821. doi: 10.1016/j.actamat.2006.02.02310.1016/j.actamat.2006.02.023 ↗
10. Wouters O, Vellinga WP, Van Tijum R, De Hosson JTM (2005) On the evolution of surface roughness during deformation of polycrystalline aluminum alloys. Acta Mater 53:4043–4050. doi: 10.1016/j.actamat.2005.05.00710.1016/j.actamat.2005.05.007 ↗
11. Mizuno T, Mulki H (1996) Changes in surface texture of zinc-coated steel sheets under plastic deformation. Wear 198:176–184. doi: 10.1016/0043-1648(96)06963-310.1016/0043-1648(96)06963-3 ↗
12. Zhao Z, Radovitzky R, Cuitiño A (2004) A study of surface roughening in fcc metals using direct numerical simulation. Acta Mater 52:5791–5804. doi: 10.1016/j.actamat.2004.08.03710.1016/j.actamat.2004.08.037 ↗
13. Lee PS, Piehler HR, Adams BL et al (1998) Influence of surface texture on orange peel in aluminum. J Mater Process Technol 80:315–319
14. Becker R (1998) Effects of strain localization on surface roughening during sheet forming. Acta Metall 46:1075–1457
15. Wittridge NJ, Knutsen RD (1999) A microtexture based analysis of the surface roughening behaviour of an aluminium alloy during tensile deformation. Mater Sci Eng A 269:205–216. doi: 10.1016/S0921-5093(99)00145-810.1016/S0921-5093(99)00145-8 ↗
16. Wilson DV, Roberts WT, Rodrigues PMB (1981) Effects of grain anisotropy on limit strains in biaxial stretching: part ii. sheets of cubic metals and alloys with well-developed preferred orientations. Metall Trans A 12:1603–161110.1007/BF02643566 ↗
17. Baczynski GJ, Guzzo R, Ball MD, Lloyd DJ (2000) Development of roping in an aluminum automotive alloy AA6111. Acta Mater 48:3361–337610.1016/S1359-6454(00)00141-5 ↗
18. Faber ET, Vellinga WP, De Hosson JTM (2014) Local delamination on heavily deformed polymer–metal interfaces: evidence from microscopy. J Mater Sci 49:691–700. doi: 10.1007/s10853-013-7750-610.1007/s10853-013-7750-6 ↗
19. Hamelin CJ, Diak BJ, Pilkey AK (2011) Multiscale modelling of the induced plastic anisotropy in bcc metals. Int J Plast 27:1185–1202. doi: 10.1016/j.ijplas.2011.01.00310.1016/j.ijplas.2011.01.003 ↗
20. Romanov AE (2003) Importance of disclinations in severe plastically deformed materials. Adv Eng Mater 5:301–307. doi: 10.1002/adem.20031008710.1002/adem.200310087 ↗
21. Alexander GP, Chen BG-G, Matsumoto EA, Kamien RD (2012) Colloquium: disclination loops, point defects, and all that in nematic liquid crystals. Rev Mod Phys 84:497–514. doi: 10.1103/RevModPhys.84.49710.1103/RevModPhys.84.497 ↗
22. Pantleon W (2008) Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction. Scr Mater 58:994–997. doi: 10.1016/j.scriptamat.2008.01.05010.1016/j.scriptamat.2008.01.050 ↗
23. Wilkinson AJ, Meaden G, Dingley DJ (2006) High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity. Ultramicroscopy 106:307–313. doi: 10.1016/j.ultramic.2005.10.00110.1016/j.ultramic.2005.10.001 ↗
24. Nye J (1953) Some geometrical relations in dislocated crystals. Acta Metall 1:153–162. doi: 10.1016/0001-6160(53)90054-610.1016/0001-6160(53)90054-6 ↗
25. Canny J (1986) A computational approach to edge-detection. IEEE Trans Pattern Anal Mach Intell 8:679–69810.1109/TPAMI.1986.4767851 ↗