Impact of clay nanoparticles on glutaraldehyde crosslinked fiber composites
Source abstract
Abstract
Glutaraldehyde (GA) was investigated as a potential binder material for nanoparticle-modified wood fiber-based composites. Clay nanoparticle wood fiber composites were fabricated using a wet-lay forming process followed by compression molding. GA treatments significantly increased both bending modulus and strength properties of wood fiber composites. Bending modulus and strength of the fiber composites increased from 2.1 GPa and 16.4 MPa without GA treatment to 6.9 GPa and 49.6 MPa, respectively, after GA treatments. Wood modification with GA also substantially decreased water absorbance and thickness swelling of wood fiber composites. Although there was a significant change in performance after crosslinking, only minimal changes were detected in FTIR analysis of the fiber composites. The effect of montmorillonite clay nanoparticles loading onto wood fiber was found to have a deleterious impact on performance of the wood fiber composites. This research suggests that the nanoparticles inhibit wood fiber–fiber interactions resulting in poor interfiber bonding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. U.S. Department of Agriculture (2010) Wood handbook: wood as an engineering material. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison
2. Li K, Peshkova S, Geng X (2004) J Am Oil Chem Soc 81:48710.1007/s11746-004-0928-1 ↗
3. Yasuda R, Minato K, Norimoto M (1994) Wood Sci Technol 28:20910.1021/es00054a703 ↗
4. Yasuda R, Minato K (1994) Wood Sci Technol 28:10110.1007/BF00193329 ↗
5. Xiao Z, Xie Y, Militz H, Mai C (2010) Holzforschung 64:483
6. Xiao Z, Xie Y, Militz H, Mai C (2010) Holzforschung 64:475
7. Xie Y, Hill CAS, Xiao Z, Mai C, Militz H (2011) Wood Sci Technol 45:4910.1007/s00226-010-0311-0 ↗
8. Bana R, Banthia AK (2007) Polym Plast Technol Eng 46:82110.1080/03602550701278079 ↗
9. Tang Z, Kotov NA, Magonov S, Ozturk B (2003) Nat Mater 2:41310.1038/nmat906 ↗
10. Podsiadlo P, Kaushik AK, Arruda EM, Waas AM, Shim BS, Xu J, Nandivada H, Pumplin BG, Lahann J, Ramamoorthy A, Kotov NA (2007) Science 318:8010.1126/science.1143176 ↗
11. Okada A, Kawasumi M, Kurauchi T, Kamigaito O (1987) Polym Prepr Am Chem Soc Div Polym Chem 28:447
12. Okada A, Kawasumi M, Usuki A, Kojima Y, Kurauchi T, Kamigaito O (1990) Mater Res Soc Symp Proc 171:4510.1557/PROC-171-45 ↗
13. Messersmith PB, Giannelis EP (1994) Chem Mater 6:171910.1021/cm00046a026 ↗
14. LeBaron PC, Wang Z, Pinnavaia TJ (1999) Appl Clay Sci 15:1110.1016/S0169-1317(99)00017-4 ↗
15. Manevitch OL, Rutledge GC (2004) J Phys Chem B 108:142810.1021/jp0302818 ↗
16. Bledzki AK, Gassan J (1999) Prog Polym Sci 24:22110.1016/S0079-6700(98)00018-5 ↗
17. Lin Z, Renneckar S, Hindman DP (2008) Cellulose 15:33310.1007/s10570-007-9188-y ↗
18. Lin Z, Renneckar S (2011) Cellulose 18:56310.1007/s10570-011-9502-6 ↗
19. Lin Z, Renneckar S (2011) Compos A 42:8410.1016/j.compositesa.2010.10.011 ↗
20. Renneckar S, Zhou Y (2009) ACS Appl Mater Interfaces 1:55910.1021/am800119q ↗
21. Yin Y, Berglund L, Salmen L (2011) Biomacromolecules 12:19410.1021/bm101144m ↗
22. Lei Y, Wu Q, Clemons CM, Yao F, Xu Y (2007) J Appl Polym Sci 106:395810.1002/app.27048 ↗
23. Meng QK, Hetzer M, De Kee D (2011) J Compos Mater 45:114510.1177/0021998310381541 ↗
24. Zhou Y, Renneckar S, Pillai KV, Li Q, Lin Z, Church WT (2010) Bioresources 5:153010.15376/biores.5.3.1530-1541 ↗