Co-deposition and densification of SiC with MgO for biomedical applications
Source abstract
Abstract
This article focuses on the electrophoretic co-deposition of SiC and MgO, which has not been previously reported. The EPD of SiC has been widely investigated, whilst the EPD of SiC with sintering additives is usually not taken into account since every compound added to the suspension seriously affects the zeta-potential and the conductivity, the two main parameters that should be optimized to achieve a good deposit. We comprehensively observed the effects of the individual compounds on the colloidal behaviour of a suspension suitable for co-deposition to achieve good homogeneity and the highest possible green density. The obtained green densities reached up to 1.92 g/cm3, which correspond to 60% of theoretical density, whilst after sintering in open air at 1350 °C the densities reached 2.33 g/cm3. SEM and TEM analyses revealed that the microstructure is composed of SiC grains embedded in a SiO2 matrix, whilst XRD confirmed that even though the sintering caused a partial oxidation and the appearance of an amorphous phase, the prevailing crystalline phase is still β-SiC. In the presence of MgO, SiO2 also appears in the crystalline form as cristobalite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Advanced ceramic materials synthesis · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Reynaud C, Thevenot F, Chartier T, Besson JL (2005) J Eur Ceram Soc 25(5):589. doi: 10.1016/j.jeurceramsoc.2004.02.00910.1016/j.jeurceramsoc.2004.02.009 ↗
2. Cappi B, Neuss S, Salber J, Telle R, Knuchel R, Fischer H (2010) J Biomed Mater Res Part A 93A(1):67. doi: 10.1002/jbm.a.3252710.1002/jbm.a.32527 ↗
3. Prochazka S, Scanlan RM (1975) J Am Ceram Soc 58(1–2):72. doi: 10.1111/j.1151-2916.1975.tb18990.x10.1111/j.1151-2916.1975.tb18990.x ↗
4. Stobierski L, Gubernat A (2003) Effect Carbon Ceram Int 29(3):287. doi: 10.1016/s0272-8842(02)00117-710.1016/S0272-8842(02)00117-7 ↗
5. Stobierski L, Gubernat A (2003) Ceram Int 29(4):355. doi: 10.1016/s0272-8842(02)00144-x10.1016/S0272-8842(02)00144-X ↗
6. Gubernat A, Stobierski L, Labaj P (2007) J Eur Ceram Soc 27(2–3):781. doi: 10.1016/j.jeurceramsoc.2006.04.00910.1016/j.jeurceramsoc.2006.04.009 ↗
7. Kumar V, Gill KD (2009) Arch Toxicol 83(11):965. doi: 10.1007/s00204-009-0455-610.1007/s00204-009-0455-6 ↗
8. Tatli Z, Thompson DP (2007) J Eur Ceram Soc 27(2–3):1313. doi: 10.1016/j.jeurceramsoc.2006.04.05610.1016/j.jeurceramsoc.2006.04.056 ↗
9. Novak S, Drazic G, Konig K, Ivekovic A (2010) J Nucl Mater 399(2–3):167. doi: 10.1016/j.jnucmat.2010.01.01410.1016/j.jnucmat.2010.01.014 ↗
10. Negita K (1986) J Am Ceram Soc 69(12):C30810.1111/j.1151-2916.1986.tb07398.x ↗
11. Miyazaki H, Hakomori A, Yasuda K, Matsuo Y, Yano T, Iseki T (2001) J Ceram Soc Jpn 109(3):22710.2109/jcersj.109.1267_227 ↗
12. Foster D, Thompson DP (1999) J Eur Ceram Soc 19(16):2823. doi: 10.1016/s0955-2219(99)00060-610.1016/S0955-2219(99)00060-6 ↗
13. Corni I, Ryan MP, Boccaccini AR (2008) J Eur Ceram Soc 28(7):1353. doi: 10.1016/j.jeurceramsoc.2007.12.01110.1016/j.jeurceramsoc.2007.12.011 ↗
14. Ivekovic A, Drazic G, Novak S (2011) J Eur Ceram Soc 31(5):833. doi: 10.1016/j.jeurceramsoc.2010.11.02110.1016/j.jeurceramsoc.2010.11.021 ↗
15. Konig K, Novak S, Ivekovic A, Rade K, Meng DC, Boccaccini AR, Kobe S (2010) J Eur Ceram Soc 30(5):1131. doi: 10.1016/j.jeurceramsoc.2009.07.02710.1016/j.jeurceramsoc.2009.07.027 ↗
16. Rade K, Novak S, Kobe S (2011) J Mater Sci Eng A 1(3a):301
17. Vandeperre L, VanDerBiest O, Bouyer F, Persello J, Foissy A (1997) J Eur Ceram Soc 17(2–3):37310.1016/S0955-2219(96)00106-9 ↗
18. Hench LL (2006) J Mater Sci-Mater Med 17(11):967. doi: 10.1007/s10856-006-0432-z10.1007/s10856-006-0432-z ↗
19. Bentz DP, Snyder KA, Cass LC, Peitz MA (2008) Cem Concr Compos 30(8):674. doi: 10.1016/j.cemconcomp.2008.05.00110.1016/j.cemconcomp.2008.05.001 ↗
20. Ferrari B, Moreno R (1996) Mater Lett 28(4–6):353. doi: 10.1016/0167-577x(96)00075-410.1016/0167-577X(96)00075-4 ↗
21. Novak S, Drazic G, Mejak K (2006) In: Boccaccini AR, VanderBiest O, Clasen R (eds) Electrophoretic deposition: fundamentals and applications, vol 314. Key Engineering Materials Trans Tech Publications Ltd., Zurich-Uetikon, p 45
22. Novak S, Mejak K, Drazic G (2006) J Mater Sci 41(24):8093. doi: 10.1007/s10853-006-0646-y10.1007/s10853-006-0646-y ↗
23. Novak S, Konig K (2009) Ceram Int 35(7):2823. doi: 10.1016/j.ceramint.2009.03.03310.1016/j.ceramint.2009.03.033 ↗
24. Sun J, Gao L (2001) J Eur Ceram Soc 21(13):2447. doi: 10.1016/s0955-2219(01)00196-010.1016/S0955-2219(01)00196-0 ↗