journal article·2012-07Open access

Microstructure of low temperature processed CNFs/glass nanocomposites

M. A. Mazo, C. Palencia, A. Nistal, F. Rubio, J. Rubio, J. L. Oteo

Journal of Materials Science· Volume 47· Issue 13

Abstract

Carbon nanofibers/glass (CNF/G) nanocomposites were obtained from a glass powder of low melting point and pristine CNFs. Green bodies containing from 0 to 22 % (v/v) of CNFs were sintered under nitrogen atmosphere in the 550–700 °C temperature range with different holding times. A fully microstructure characterization, by means of Hg porosimetry and N2 adsorption, was carried out for understanding the CNFs/G composites behavior during the sintering process. This understanding is required to optimize the microstructural design of CNFs/glass nanocomposite materials. During sintering two different and simultaneous phenomena occur the matrix crystallization and the pore formation. The glass matrix crystallization temperature decreases from 650 to 550 °C, when CNFs concentration increases to 22 % (v/v). The glass matrix produces the CNFs degradation and generates gaseous species which lead to homogeneous or foamy materials. This depends on the CNFs concentration and thermal treatment conditions. Foamy nanocomposites present pore size distributions with pores <0.1 and close to 20 μm. The glass matrix wets the CNFs and produce their degradation been of 1 % of carbon loss in all nanocomposites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Foaming and Composites · Polymer Nanocomposites and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Dresselhaus MS, Dresselhaus G, Eklund PC (1996) Science of fullerenes and carbon nanotubes. Academic Press, San Diego
2. Dresselhaus MS, Dresselhaus G, Avouris P (2001) Carbon nanotubes: synthesis, structure, properties, and applications. Springer, Berlin10.1007/3-540-39947-X ↗
3. Falvo MR, Clary GJ, Taylor RM, Chi C, Brooks FP Jr, Washburn S, Superfine R (1997) Nature 389:58210.1038/39282 ↗
4. Feng Y, Yuan HL, Zhang M (2005) Mater Charact 55:21110.1016/j.matchar.2005.05.003 ↗
5. George R, Kashyap KT, Rahul R, Yamdagni S (2005) Scr Mater 53:115910.1016/j.scriptamat.2005.07.022 ↗
6. Siegel RW, Chang SK, Ash BJ, Stone J, Ajayan PM, Doremus RW, Schadler LS (2001) Scr Mater 44:206110.1016/S1359-6462(01)00892-2 ↗
7. Coleman JN, Khan U, Gun’ko YK (2006) Adv Mater 18:68910.1002/adma.200501851 ↗
8. Palencia C, Mazo MA, Nistal A, Rubio F, Rubio J, Oteo JL (2011) J Nanopart Res 13:6021. doi: 10.1007/s11051-011-0331-110.1007/s11051-011-0331-1 ↗
9. Thostenson ET, Ren Z, Chou TW (2001) Compos Sci Technol 61:89910.1016/S0266-3538(01)00094-X ↗
10. Cho J, Boccaccini AR, Shaffer MSP (2009) J Mater Sci 44:1934. doi: 10.1007/s10853-009-3262-910.1007/s10853-009-3262-9 ↗
11. Hirsch A (2002) Angew Chem Int Ed 41:185310.1002/1521-3773(20020603)41:11<1853::AID-ANIE1853>3.0.CO;2-N ↗
12. Li J, Vergne MJ, Mowles ED, Zhong WH, Hercules DM, Lukehart CM (2005) Carbon 43:288310.1016/j.carbon.2005.06.003 ↗
13. Palencia C, Rubio F, Merino C, Rubio J, Oteo JL (2008) J Nano Res 4:3310.4028/www.scientific.net/JNanoR.4.33 ↗
14. Palencia C, Rubio J, Rubio F, Fierro JLG, Oteo JL (2011) J Nanosci Nanotechnol 11:414210.1166/jnn.2011.4147 ↗
15. Nistal A, Palencia C, Mazo MA, Rubio F, Rubio J, Oteo JL (2011) Carbon 49:163510.1016/j.carbon.2010.12.047 ↗
16. Ning J, Zhang J, Pan Y, Guo J (2003) Mater Sci Eng A 357:39210.1016/S0921-5093(03)00256-9 ↗
17. Boccaccini AR, Acevedo DR, Brusatin G, Colombo P (2005) J Eur Ceram Soc 25:151510.1016/j.jeurceramsoc.2004.05.015 ↗
18. Ning J, Zhang J, Pan Y, Guo J (2004) Ceram Int 30:6310.1016/S0272-8842(03)00063-4 ↗
19. Boccaccini AR, Thomas BJC, Brusatin G, Colombo P (2007) J Mater Sci 42:2030. doi: 10.1007/s10853-006-0540-710.1007/s10853-006-0540-7 ↗
20. Giovanardi R, Montorsi M, Ori G, Cho J, Subhani T, Boccaccini AR, Siligardi C (2010) J Mater Chem 20:30810.1039/B914924D ↗
21. Chu BTT, Tobias G, Salzmann CG, Ballesteros B, Grobert N, Todd RI, Green MLH (2008) J Mater Chem 18:534410.1039/b809369e ↗
22. Thomas BJC, Shaffer MSP, Boccaccini AR (2009) Composites Part A 40:83710.1016/j.compositesa.2009.04.006 ↗
23. Gou S, Sivakumar R, Kagawa Y (2007) Adv Eng Mater 9:8410.1002/adem.200600169 ↗
24. Cho J, Inam F, Reece MJ, Chlup Z, Dlouhy I, Shaffer MSP, Boccaccini AR (2011) J Mater Sci 46:4770. doi: 10.1007/s10853-011-5387-x10.1007/s10853-011-5387-x ↗
25. Ci L, Wei J, Wei B, Liang J, Xu C, Wu D (2001) Carbon 39:32910.1016/S0008-6223(00)00126-3 ↗
26. Martin-Gullon I, Vera J, Conesa JA, González JL, Merino C (2006) Carbon 44:157210.1016/j.carbon.2005.12.027 ↗
27. Brunauer S, Emmett PH, Teller E (1938) J Am Ceram Soc 60:309
28. Barret EP, Joyner LG, Halenda PP (1951) J Am Ceram Soc 73:373
29. Sligardi C, D’Arrigo MC, Leonelli C (2000) Am Ceram Soc Bull 79:88
30. Weisenberger M, Martin-Gullon I, Vera-Agullo J, Varela-Rizo H, Merino C, Andrews R, Quian D, Rantell T (2009) Carbon 47:221110.1016/j.carbon.2009.03.070 ↗
31. Borrel A, Fernández A, Merino C, Torrecillas R (2010) Int J Mater Res 101:11210.3139/146.110246 ↗
32. Inam F, Yan H, Peijs T, Reece MJ (2010) Compos Sci Technol 70:94710.1016/j.compscitech.2010.02.010 ↗