The influence of grain morphology on texture measured after phase transformation in multiphase steels
Source abstract
Abstract
In the present paper, the influence of grain morphology on the textures of multiphase steels measured after phase transformation is investigated. Especially, it is shown that the presence of very elongated grains in the product phase can strongly influence the classical quantitative determination of the texture of this phase from surface measurements (in X-ray diffraction or EBSD). Thus, a method is proposed to deduce the “real” texture from the “apparent” one, measured within a plane. It is then shown that for the investigated multiphase steel, for which phase transformation has occurred either from deformed or recrystallized austenite, this correction provides a very good quantitative agreement between corrected experimental product (ferrite) textures and those obtained from the parent (austenite) phase, assuming a KS or slightly different orientation relationship, without considering any variant selection.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Zhang MX, Kelly PM (2009) Crystallographic features of phase transformations in solids. Prog Mater Sci 54(8):1101–117010.1016/j.pmatsci.2009.06.001 ↗
2. Ray RK, Jonas JJ, Butrón-Guillén MP, Savoie J (1994) Transformation textures in steels. ISIJ Int 34(12):927–94210.2355/isijinternational.34.927 ↗
3. Xu PG, Tomota Y, Vogel SC, Suzuki T, Yonemura M, Kamiyama T (2013) Transformation strain and texture evolution during diffusional phase transformation of low alloy steels studied by neutron diffraction. Rev Adv Mater Sci 33(5):389–395
4. Bain EC, Dunkirk NY (1924) The nature of martensite. Trans AIME 70:25–46
5. Kurdjumow G, Sachs G (1930) Über den Mechanismus der Stahlhärtung. Zeitschrift für Physik 64:325–34310.1007/BF01397346 ↗
6. Nishiyama Z (1934:1935) X-ray investigation of the mechanism of the transformation from face-centred cubic lattice to body-centered cubic. Scientific Report. Tohoku Imperial University, Tokyo, p 637
7. Wassermann G (1933) Über den Mechanismus der α-γ-Umwandlung des Eisens. Arch Eisenhüttenwes 16:647
8. Verlinden B, Bocher P, Girault E, Aernoudt E (2001) Austenite texture and bainite/austenite orientation relationships in TRIP steel. Scr Mater 45(8):909–91610.1016/S1359-6462(01)01110-1 ↗
9. Suh DW, Kang JH, Oh KH, Lee HC (2002) Evaluation of the deviation angle of ferrite from the Kudjumov–Sachs relationship in a low carbon steel by EBSD. Scr Mater 46(5):375–37810.1016/S1359-6462(01)01254-4 ↗
10. Cabus C, Réglé H, Bacroix B (2007) Orientation relationship between austenite and bainite in a multiphased steel. Mater Charact 58(4):332–33810.1016/j.matchar.2006.05.016 ↗
11. Badji R, Bouabdallah M, Bacroix B, Kahloun C, Belkessa B, Maza H (2008) Phase transformation and mechanical behavior in annealed 2205 duplex stainless steel welds. Mater Charact 59(4):447–45310.1016/j.matchar.2007.03.004 ↗
12. Butrón-Guillén MP, Costa Viana CS, Jonas JJ (1997) A variant selection model for predicting the transformation texture of deformed austenite. Metall Mater Trans A 28(9):1755–176810.1007/s11661-997-0107-5 ↗
13. Humbert M, Blaineau P, Germain L, Gey N (2011) Refinement of orientation relations occurring in phase transformation based on considering only the orientations of the variants. Scr Mater 64(2):114–11710.1016/j.scriptamat.2010.09.016 ↗
14. Gourgues-Lorenzon AF (2007) Application of electron backscatter diffraction to the study of phase transformations. Int Mater Rev 52(2):65–12810.1179/174328007X160254 ↗
15. Kundu S, Hase K, Badeshia HKDH (2007) Crystallographic texture of stress-affected bainite. Proc R Soc A 463:2309–232810.1098/rspa.2007.1881 ↗
16. Wang H-Z, Yang P, Mao W-M, Lu F-Y (2013) Effect of hot deformation of austenite on martensitic transformation in high manganese steel. J Alloy Compd 558:26–3310.1016/j.jallcom.2012.12.032 ↗
17. Miyamoto G, Iwata N, Takayama N, Furuhara T (2012) Quantitative analysis of variant selection in ausformed lath martensite. Acta Mater 60(3):1139–114810.1016/j.actamat.2011.11.018 ↗
18. Hilkhuijsen P, Geijselaers HJM, Bor TC, Perdahcıoğlu ES, vd Boogaard AH, Akkerman R (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Mater Sci Eng A 573:100–10510.1016/j.msea.2013.02.036 ↗
19. Cayron C, Barcelo F, Carlan Yd (2010) The mechanisms of the fcc–bcc martensitic transformation revealed by pole figures. Acta Mater 58(4):1395–140210.1016/j.actamat.2009.10.046 ↗
20. Brückner G, Pospiech J, Seidl I, Gottstein G (2001) Orientation correlation during diffusional α → γ phase transformation in a ferritic low carbon steel. Scripta Mater 44(11):2635–264010.1016/S1359-6462(01)00956-3 ↗
21. Lischewski I, Gottstein G (2011) Nucleation and variant selection during the α–γ–α phase transformation in microalloyed steel. Acta Mater 59(4):1530–154110.1016/j.actamat.2010.11.017 ↗
22. Réglé H, Maruyama N, Yoshinaga N (2004) Texture and microstructure of the austenite in multiphased steel sheets. In: Bacroix B et al (eds) Recrystallization and grain growth, Pts 1 and 2, Trans Tech Publications, Switzerland, p 11–20
23. Poudens A, Bacroix B (1996) Recrystallization textures in Al–SiC metal matrix composites. Scr Mater 34(6):847–85510.1016/1359-6462(95)00613-3 ↗
24. Ruer D, Baro R (1977) A new method for the determination of the texture of materials of cubic structure from incomplete reflection pole figures. Adv X-ray Anal 20:187–20010.1007/978-1-4613-9981-0_16 ↗
25. Bunge HJ, Morris PR (1982) Texture analysis in materials science: mathematical methods. Butterworths, London
26. Wu KM, Inagawa Y, Enomoto M (2004) Three-dimensional morphology of ferrite formed in association with inclusions in low-carbon steel. Mater Charact 52(2):121–12710.1016/j.matchar.2004.04.004 ↗
27. Kitahara H, Ueji R, Ueda M, Tsuji N, Minamino Y (2005) Crystallographic analysis of plate martensite in Fe-28.5 at.% Ni by FE-SEM/EBSD. Mater Charact 54(4–5):378–38610.1016/j.matchar.2004.12.015 ↗
28. Kalwa G, Schnabel E, Schwaab P (1986) Grain structure of bainitic and martensitic steels. Steel Res 57(5):207–21510.1002/srin.198600755 ↗
29. Lambert-Perlade A, Gourgues AF, Pineau A (2004) Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel. Acta Mater 52(8):2337–234810.1016/j.actamat.2004.01.025 ↗
30. Wronski S, Wierzbanowski K, Bacroix B, Chauveau T, Wrobel M, Rauch A, Montheillet F, Wronski M (2009) Texture heterogeneity of asymmetrically cold rolled low carbon steel. Arch Metall Mater 54(1):89–102
31. Wronski S, Ghilianu B, Chauveau T, Bacroix B (2011) Analysis of textures heterogeneity in cold and warm asymmetrically rolled aluminium. Mater Charact 62(1):22–3410.1016/j.matchar.2010.10.002 ↗