journal article·2014-08

An analytical study on cracking directions and damage in thermal fatigue crazing subjected to variable amplitude loadings

Bai-Mao Lei, Van-Xuan Tran, Saïd Taheri, Li Wan, Yu Zhou

Journal of Materials Science· Volume 49· Issue 16
Publisher page

Abstract

In this paper, the effects of biaxial mean stress, mainly contributed by the weld residual stress, and thermal loading conditions on cracking directions and damage in high cycle thermal fatigue crazing subjected to variable amplitude loadings are investigated by a combined analytical and computational approach. The cracking directions are related to the orientation of the critical plane defined by the maximum damage. Analytical solutions of the critical plane orientation under constant amplitude biaxial tension/compression loadings are first derived and then employed to study the effects of biaxial mean stress on the critical plane orientation. The critical plane orientation appears to strongly depend on the dominant direction defined by the larger maximum stress. The developed analytical solution of the critical plane orientation and the analytical solution of the thermal stress from the literature are employed to study the effects of thermal loading conditions on the critical plane orientation. The critical plane orientation does not seem to significantly depend on the frequency, the amplitude and the mean value of the fluid temperature fluctuations, and the heat transfer film coefficient between the fluid and the pipe wall. The critical plane orientation under variable amplitude loadings is also studied, and an approximate solution is proposed for convenient engineering applications. The critical plane orientations are used to partially explain the observed cracking directions in the high cycle thermal fatigue crazing in the old residual heat removal system of a nuclear power plant. Finally, the effects of biaxial mean stress and thermal loading conditions on the fatigue crack initiation life are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Nuclear Engineering Thermal-Hydraulics · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Chapuliot S, Gourdin C, Payen T, Magnaud JP, Monavon A (2005) Hydro-thermal-mechanical analysis of thermal fatigue in a mixing tee. Nucl Eng Des 235:575–59610.1016/j.nucengdes.2004.09.011 ↗
2. Haddar N, Fissolo A, Maillot V (2005) Thermal fatigue crack networks: an computational study. Int J Solids Struct 42:771–78810.1016/j.ijsolstr.2004.06.033 ↗
3. Maillot V, Fissolo A, Degallaix G, Degallaix S (2005) Thermal fatigue crack networks parameters and stability: an experimental study. Int J Solids Struct 42:759–76910.1016/j.ijsolstr.2004.06.032 ↗
4. Stephan JM, Curtit F (2002) High-cycle analytical thermal fatigue tests on pipe structures. ASME 2002 Prssure Vessels and Piping Conference (PVP 2002), Vancouver, BC, Canada. PVP2002-1374
5. Cipière MF, Duff JA (2002) Thermal fatigue experience in French piping: influence of surface condition and weld local geometry. Weld World 46:23–2710.1007/BF03266362 ↗
6. Le Duff JA, Tacchini B, Stephan JM, Tampigny R, Fissolo A, Vincent L (2011) High cycle thermal fatigue issues in RHRS mixing tees and thermal fatigue test on a representative 304 L mixing zone. ASME 2011 Pressure Vessels & Piping Division Conference (PVP 2011), Baltimore, Maryland, USA. PVP2011-5795110.1115/PVP2011-57951 ↗
7. Blondet E, Faidy C (2002) High cycle thermal fatigue in French PWR. 10th International Conference on Nuclear Engineering (ICONE 10), Arlington, Virginia, USA. ICONE10-2276210.1115/ICONE10-22762 ↗
8. Taheri S (2007) Some advances on understanding of high cycle thermal fatigue crazing. Journal of Pressure Vessel Technology, Transactions of the ASME 129:400–41010.1115/1.2748822 ↗
9. Bauerbach K, Vormwald M, Rudolph J (2009) Fatigue assessment of nuclear power plant components subjected to thermal cyclic loading. ASME 2009 Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech. PVP2009-7745010.1115/PVP2009-77450 ↗
10. Hai Q, Wei Y, Jian L (2010) Numerical simulation of multiple cracking in ANSI 304 stainless steel under thermal fatigue. Int J Damage Mech 19:767–78510.1177/1056789509359657 ↗
11. Kamaya M, Taheri S (2008) A study on the evolution of crack networks under thermal fatigue loading. Nucl Eng Des 238:2147–215410.1016/j.nucengdes.2008.01.017 ↗
12. Sudret B, Guede Z (2005) Probabilistic assessment of thermal fatigue in nuclear components. Nucl Eng Des 235:1819–183510.1016/j.nucengdes.2005.05.016 ↗
13. Dahlberg M, Nilsson K-F, Taylor N, Faidy C, Wilke U, Chapuliot S, Kalkhof D, Bretherton I, Church M, Solin J, Catalano J (2007) Development of a european procedure for assessment of high cycle thermal fatigue in light water reactors: final report of the NESC-thermal fatigue project, EUR 22763 EN, Netherlands
14. Metzner KJ, Wilke U (2005) European THERFAT project—thermal fatigue evaluation of piping system “Tee”-connections. Nucl Eng Des 235:473–48410.1016/j.nucengdes.2004.08.041 ↗
15. Stephan JM, Curtit F, Vindeirinho C, Taheri S, Akamatsu M, Peniguel C (2002) Evaluation of the risk of damages in mixing zones: EDF R&D programme. ASME 2002 Pressure Vessels and Piping Conference (PVP2002), Vancouver, BC, Canada. PVP2002-1328
16. Stephan JM (2011) Numerical interpretation of the endurance test on FATHER mixing zone mock-up. ASME 2011 Pressure Vessels and Piping Conference (PVP 2011), Baltimore,Maryland,USA. PVP2011-5753710.1115/PVP2011-57537 ↗
17. Socie D (1993) Critical plane approaches for multiaxial faitgue damage assessment., Advances in Multiaxial FatigueASTM, Philadelphia, pp 7–36
18. Zhang W, Akid R (1997) Effect of biaxial mean stress on cyclic stress-strain response and behaviour of short fatigue cracks in a high strength spring steel. Fatigue Fract Eng Mater Struct 20:167–17710.1111/j.1460-2695.1997.tb00276.x ↗
19. Lei BM, Tran VX, Taheri S, Wan L, Zhou Y (2014) Submitted for publication. Effects of biaxial mean stress on the critical plane orientation under biaxial tension/compression fatigue loading conditions. Int J Fatigue (accepted for publication, April 2014)10.1016/j.ijfatigue.2014.04.004 ↗
20. McDowell DL (1996) Basic issues in the mechanics of high cycle metal fatigue. Int J Fract 80:103–14510.1007/BF00012666 ↗
21. Reis L, Li B, de Freitas M (2009) Crack initiation and growth path under multiaxial fatigue loading in structural steels. Int J Fatigue 31:1660–166810.1016/j.ijfatigue.2009.01.013 ↗
22. Socie D, Marquis G (2000) Multiaxial fatigue. Society of Automotive Engineers, Inc., Warrendale10.4271/R-234 ↗
23. You BR, Lee SB (1996) A critical review on multiaxial fatigue assessments of metals. Int J Fatigue 18:235–24410.1016/0142-1123(96)00002-3 ↗
24. Musi S, Beaud F (2003) An analytical model for thermal fatigue crack initiation and propagation in mixing zones of piping systems. ASME 2003 Pressure Vessels and Piping Conference (PVP 2003), Cleveland, Ohio, USA. PVP2003-199710.1115/PVP2003-1997 ↗
25. S.P.Timoshenko, J.N.G. (2004) Theory of elasticity, 3rd edn. McGraw-Hill Companies, Inc.
26. Matake T (1977) Explanation on fatigue limit under combined stress. Bulletin of the Jsme-Japan Society of Mechanical Engineers 20:257–26310.1299/jsme1958.20.257 ↗
27. Angles J, Taheri S, Papaconstantinou T (2005) High-cycle metal fatigue under multiaxial loading damage accumulation models applied to an industrial structure. 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), Beijing, China. SMiRT18-W101-4
28. Tran VX (2013) Multiaxial criteria of priming in fatigue. Code_Aster Documentation R7.04.04. http://www.code-aster.org/V2/doc/default/en/man_r/r7/r7.04.04.pdf .
29. Fatemi A, Socie DF (1988) A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract Eng Mater Struct 11:149–16510.1111/j.1460-2695.1988.tb01169.x ↗
30. Colin J, Fatemi A, Taheri S (2011) Cyclic hardening and fatigue behavior of stainless steel 304L. Journal of Materials Science 46:145–15410.1007/s10853-010-4881-x ↗
31. Shamsaei N, Fatemi A, Socie DF (2011) Multiaxial fatigue evaluation using discriminating strain paths. Int J Fatigue 33:597–60910.1016/j.ijfatigue.2010.11.002 ↗
32. Sbitti A, Taheri S (2010) Crack arrest in high cycle thermal fatigue crazing. Nucl Eng Des 240:30–3810.1016/j.nucengdes.2009.09.030 ↗
33. Downing SD, Socie DF (1982) Simple rainflow counting algorithms. Int J Fatigue 4:31–4010.1016/0142-1123(82)90018-4 ↗
34. Wang CH, Brown MW (1996) Life prediction techniques for variable amplitude multiaxial fatigue—part 1: theories. Journal of Engineering Materials and Technology, Transactions of the ASME 118:367–37010.1115/1.2806821 ↗
35. Fatemi A, Yang L (1998) Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials. Int J Fatigue 20:9–3410.1016/S0142-1123(97)00081-9 ↗
36. Miner MA (1945) Cumulative damage in fatigue. Journal of Applied Mechanics-Transactions of the ASME 12:A159–A16410.1115/1.4009458 ↗