Microstructure and properties of an electroconductive SiC-based composite
Source abstract
Abstract
In this work, an SiC-based electroconductive composite is obtained through simultaneous addition of MoSi2 and ZrB2 particles. The composite material is fully densified by hot pressing at 1860°C and the microstructure is investigated by SEM-EDS analysis. Microstructural features and mechanical properties are compared to those of a monolithic hot-pressed SiC material. The MoSi2 and ZrB2 particles, besides increasing the electrical conductivity of the silicon carbide matrix, also act as reinforcement for the material. Room-temperature strength reaches the value of 850 MPa and the fracture toughness is 4.2 MPa m0.5. The composite electrical resistivity is of the order of 103 W cm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Van Dijen FK, Mayer E (1996) J Eur Ceram Soc 16:41310.1016/0955-2219(95)00129-8 ↗
2. Dressler EW, Riedel R (1997) Int J Refractory Metals Hard Mater 15:1310.1016/S0263-4368(96)00046-7 ↗
3. Falk LK (1997) J Eur Ceram Soc 17:98310.1016/S0955-2219(96)00198-7 ↗
4. Sciti D, Bellosi A (2000) J MatSci 35:384910.1023/A:1004881430804 ↗
5. Balbo A, Dalle Fabbriche D, Sciti D, Bellosi A (2004) In: Mandal H, Öveçoğlu L (eds) Key engineering materials, vols 264–268. Trans Tech Publications, Switzerland, p 1039
6. Gomez E, Echeberria J, Iturriza I, Castro F (2004) J Eur Ceram Soc 24:289510.1016/j.jeurceramsoc.2003.09.002 ↗
7. Sciti D, Balbo A, Bellosi A (2005) Adv Eng Mat 7:15210.1002/adem.200400169 ↗
8. Petrovic JJ, Pena MI, Reimanis IE, Sandlin MS, Conzone SD, Kung HH, Butt DP (1997) J Am Ceram Soc 80:307010.1111/j.1151-2916.1997.tb03234.x ↗
9. Petrovic JJ, Honnel RE (1990) J Mater Sci Letts 9:108310.1007/BF00727883 ↗
10. Sciti D, Guicciardi S, Melandri C, Bellosi A (2003) J Am Ceram Soc 86:172010.1111/j.1151-2916.2003.tb03546.x ↗
11. Klemm H, Tangermann K, Schubert C, Hermel W (1996) J Am Ceram Soc 79:242910.1111/j.1151-2916.1996.tb08993.x ↗
12. Medri V, Bellosi A (2004) J Mater Res 19:156710.1557/JMR.2004.0210 ↗
13. Krnel K, Sciti D, Landi E, Bellosi A (2003) Appl Surf Sci 210:27410.1016/S0169-4332(03)00155-7 ↗
14. Mizutani T, Tsuge A (1992) J Ceram Soc Jpn Int Ed 100:97910.2109/jcersj.100.991 ↗
15. Munz DG, Shannon JL Jr, Bubsey RT (1980) Int J Fracture 16:13710.1007/BF00013393 ↗
16. Mulla MA, Kristic VK (1991) Ceram Bull 70:439
17. Levin EM, Robbins CR, Mc Murdie HF (1969) Phase diagram for ceramists, 1969 Suppl. The American Ceramic Society, Columbus, OH, p 98
18. Roebben G, Sardu C, van der Biest O (2003) In: Brito ME, Lin HT, Plucknett K (eds) Ceramic transactions: “silicon based structural ceramics for the new millennium”, vol 142. The American Ceramic Society, Westerville, Ohio, p 123
19. Newmann A, Jewett T, Sampath S, Bernt C, Herman H (1998) J Mat Res 13:266210.1557/JMR.1998.0371 ↗
20. Walpole LJ (1966) J Mech Phys Solids 14:15110.1016/0022-5096(66)90035-4 ↗
21. Shackelford JF, Alexander W (eds) (2001) CRC Materials science and engineering handbook. CRC Press, USA10.1201/9781420038408 ↗
22. Nakamura M, Matsumoto S, Hirano T (1990) J Mat Sci 29:330910.1007/BF00587691 ↗
23. Cutler RA (1991) In: Schneider SJ (ed) Engineered Materials Handbook, Ceramic and Glasses, vol 4. ASM International, The Materials Information Society, Materials Park, OH, p 787
24. Taya M, Hayashi S, Kobayashi AS, Yoon HS (1990) J Am Ceram Soc 73:138210.1111/j.1151-2916.1990.tb05209.x ↗