Surface morphological properties of sol-gel derived SiO2 fiber
Source abstract
Abstract
In this study, sol-gel derived SiO2 fibers were prepared by mixing tetraethyl orthosilicate, ethanol, water and hydrochloric acid. Fibrous SiO2 was drawn by using a viscous solution. Dried gel fibers were final heat-treated at 1000, 1100, 1200 and 1300°C for 1 h in air. Crystallinity of the SiO2 fiber after annealing was measured by X-ray diffraction analysis. A field emission—scanning electron microscope and an atomic force microscope were used to evaluate surface properties. SiO2 fiber heat-treated at high temperature, i.e., 1300°C, exhibited inhomogeneous surface structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Surface Roughness and Optical Measurements · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. T. Hashimoto, K. Kamiya and H. Nasu, J. Non-Cryst. Solids 143 (1992) 31.10.1016/S0022-3093(05)80549-6 ↗
2. S. Sakka and K. Kamiya, ibid. 48 (1982) 31.10.1016/0022-3093(82)90244-7 ↗
3. S. Sakka and H. Kozuka, ibid. 100 (1988) 142.10.1016/0022-3093(88)90011-7 ↗
4. D. Y. Shin and S. M. Han, J. Sol-Gel Sci. Tech. 1 (1994) 267.10.1007/BF00486169 ↗
5. M. D. Sacks and R. S. Sheu, J. Non-Cryst. Solids 92 (1987) 383.10.1016/S0022-3093(87)80057-1 ↗
6. H. G. Sowman, Ceram. Bull. 67 (1988) 1911.
7. I. Hasegawa, T. Nakamura, S. Motojima and M. Kajiwara, J. Non-Cryst. Solids 8 (1997) 577.
8. T. Kokubo, S. B. Cho, K. Nakanishi, N. Soga, C. Ohtsuki, T. Kitsugi, T. Yamamuro and T. Nakamura, Bioceram. 7 (1994) 49.10.1016/B978-0-08-042144-5.50011-X ↗
9. S. B. Cho, K. Nakanishi, T. Kokubo, N. Soga, C. Ohtsuki, T. Nakamura, T. Kitsugi and T. Yamamuro, J. Amer. Ceram. Soc. 78 (1995) 1769.10.1111/j.1151-2916.1995.tb08887.x ↗
10. M. Jokinen, M. PÄtsi, H. Rahiala, T. Peltola, M. Ritala and J. B. Rosenholm, J. Biomed. Mater. Res. 42 (1998) 295.10.1002/(SICI)1097-4636(199811)42:2<295::AID-JBM15>3.0.CO;2-I ↗
11. T. Peltola, M. Jokinen, H. Rahiala, M. PÄtsi, J. HeikkilÄ, I. Kangasniemi and A. Yli-Urpo, ibid. 51 (2000) 200.10.1002/(SICI)1097-4636(200008)51:2<200::AID-JBM8>3.0.CO;2-Z ↗
12. J. M. Elson and J. M. Bennett, Appl. Optics 34 (1995) 201.10.1364/AO.34.000201 ↗
13. C. Ruppe and A. DuparrÉ, Thin Solid Films 288 (1996) 8.10.1016/S0040-6090(96)08807-4 ↗
14. T. Peltola, M. Jokinen, S. Veittola, J. Simola and A. Yli-Urpo, J. Biomed. Mater. Res. 54 (2001) 579.10.1002/1097-4636(20010315)54:4<579::AID-JBM150>3.0.CO;2-Q ↗
15. B. C. Yang, J. Weng, X. D. Li and X. D. Zhang, ibid. 47 (1999) 213.10.1002/(SICI)1097-4636(199911)47:2<213::AID-JBM11>3.0.CO;2-C ↗
16. C. Ohtsuki, T. Kokubo and T. Yamamuro, J. Non-Cryst. Solids 143 (1992) 84.10.1016/S0022-3093(05)80556-3 ↗