Effect of the addition of t-ZrO2 on the material properties of β-TCP/PCL composites
Source abstract
Abstract
Using poly-methyl methacrylate as a pore-forming agent, porous β-tricalcium phosphate (β-TCP)/t-ZrO2 composites were fabricated depending on the volume percentages (vol.%) of t-ZrO2 powder. In the porous sintered bodies, hybrid pores, about 20 and 200 μm in diameter, were homogenously dispersed in the β-TCP/t-ZrO2 matrix and showed good interconnection. On the other hand, β-TCP-(t-ZrO2)/polycaprolactone (PCL) composites were fabricated by the melt infiltration process using porous β-TCP/t-ZrO2 bodies. The relative density of the β-TCP-(t-ZrO2)/PCL composites increased as the vol.% of t-ZrO2 increased and its maximum value was about 98.6%. However, the hardness, bending strength and elastic modulus of β-TCP-(t-ZrO2)/PCL composites decreased due to the low densification of porous β-TCP/t-ZrO2 bodies as the volume percentages of t-ZrO2 content increased. The values (using 20 vol.% of t-ZrO2) were 11.4 Hv, 25.5 MPa and 17.2 GPa, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Hench LL (1998) J Am Ceram Soc 81:170510.1111/j.1151-2916.1998.tb02540.x ↗
2. Akao M, Aoki H, Kato K, Sato A (1982) J Mater Sci 17:243. doi: https://doi.org/10.1007/BF0059146810.1007/BF00591468 ↗
3. Jarcho MH, Salsbury RL, Thomas J, Doremus RH (1979) J Mater Sci 14:142. doi: https://doi.org/10.1007/BF0102833710.1007/BF01028337 ↗
4. Ryu HS, Hong KS, Lee JK, Kim DJ, Lee JH, Chang BS, Lee CH, Chung SS (2004) Biomaterials 25:393. doi: https://doi.org/10.1016/S0142-9612(03)00538-610.1016/S0142-9612(03)00538-6 ↗
5. Descamps M, Hornez JC, Leriche A (2007) J Eur Ceram Soc 27:2401. doi: https://doi.org/10.1016/j.jeurceramsoc.2006.09.00510.1016/j.jeurceramsoc.2006.09.005 ↗
6. Lei Y, Rai B, Ho KH, Teoh SH (2007) Mater Sci Eng C 27:293. doi: https://doi.org/10.1016/j.msec.2006.05.00610.1016/j.msec.2006.05.006 ↗
7. Biqiong C, Kang S (2005) Polymer Test 24:978. doi: https://doi.org/10.1016/j.polymertesting.2005.07.01310.1016/j.polymertesting.2005.07.013 ↗
8. Gain AK, Lee BT (2006) Mater Sci Eng A 419:269. doi: https://doi.org/10.1016/j.msea.2005.12.03310.1016/j.msea.2005.12.033 ↗
9. Huang SG, Vleugels J, Li L, Biest OV, Wang PL (2005) J Eur Ceram Soc 25:3109. doi: https://doi.org/10.1016/j.jeurceramsoc.2004.07.00310.1016/j.jeurceramsoc.2004.07.003 ↗
10. Lee BT, Kang IC, Cho SH, Song HY (2005) J Am Ceram Soc 88:226210.1111/j.1551-2916.2005.00364.x ↗
11. Lee BT, Youn MH, Paul RK, Lee KH, Song HY (2007) Mater Chem Phys 104:249. doi: https://doi.org/10.1016/j.matchemphys.2007.02.00910.1016/j.matchemphys.2007.02.009 ↗
12. Sabbagh J, Vreven J, Leloup G (2002) Dent Mater 18:64. doi: https://doi.org/10.1016/S0109-5641(01)00021-510.1016/S0109-5641(01)00021-5 ↗
13. Rezwan K, Chen QZ, Blaker JJ, Boccaccini AR (2006) Biomaterials 27:3413. doi: https://doi.org/10.1016/j.biomaterials.2006.01.03910.1016/j.biomaterials.2006.01.039 ↗