Decreased degradation of poly(p-phenylene vinylene) films at the indium–tin oxide interface
Source abstract
Abstract
This article discusses a strategy to reduce the degradation of a poly(p-phenylene vinylene) (PPV) film at the interface with an indium–tin oxide (ITO) electrode. It consists of using a less aggressive leaving group, the sodium dodecylbenzenesulfonate salt (DBS), in the chemical synthesis of PPV starting with the polymer precursor, and performing the thermal conversion into PPV at a lower temperature (100 °C) than in the conventional synthesis. The absorbance spectrum for an ITO/PPV + DBS film indicated that the polymer is less degraded and has the emission efficiency increased by ca. 4.5 times in comparison to ITO/PPV films obtained with the conventional procedures, i.e., with thermal conversion at 200 °C, in vacuum, during 2 h. The main reason for the enhanced performance of the route reported in this article is a decrease in the oxygen concentration at the ITO/PPV interface, as inferred with X-ray Photoelectron Spectroscopy which corroborates the optical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Parker ID (1994) J Appl Phys 75:165610.1063/1.356350 ↗
2. Benten H, Ogama M, Ohkita H, Ito S (2008) Adv Funct Mater 18:156310.1002/adfm.200701167 ↗
3. Ogawa M, Kudo N, Ohkita H, Ito S, Benten H (2007) Appl Phys Lett 90:22310710.1063/1.2744484 ↗
4. Bradley DDC (1987) J Phys D 20:138910.1088/0022-3727/20/11/007 ↗
5. Karg S, Meier M, Riess W (1997) J Appl Phys 82:195110.1063/1.366003 ↗
6. Brütting W, Meier M, Herold M, Karg S, Schwoerer M (1998) Chem Phys 227:24310.1016/S0301-0104(97)00195-X ↗
7. Herold M, Gmeiner J, Drummer C, Schwoerer M (1997) J Mater Sci 32:5709. doi: 10.1023/A:101866151609910.1023/A:1018661516099 ↗
8. Nguyen TP, de Vos S (1996) Vacuum 47:115310.1016/0042-207X(96)00179-0 ↗
9. Brütting W, Meier M, Herold M, Karg S, Schwoerer M (1997) Synth Met 91:16310.1016/S0379-6779(98)80081-7 ↗
10. Lemmer U, Karg S, Scheidler M, Deussen M, Rie W, Cleve B, Thomas P, Bässler H, Schwoerer M, Göbel EO (1994) Synth Met 67:16910.1016/0379-6779(94)90034-5 ↗
11. Sheats JR, Roitman DB (1998) Synth Met 95:7910.1016/S0379-6779(98)00031-9 ↗
12. Nguyen TP, Spiesser M, Garnier A, de Kok M, Tr VH (1999) Mater Sci Eng B 60:7610.1016/S0921-5107(99)00026-4 ↗
13. Marletta A, Gonçalves D, Oliveira Jr ON, Faria RM, Guimarães FEG (2000) Adv Mater 12:6910.1002/(SICI)1521-4095(200001)12:1<69::AID-ADMA69>3.0.CO;2-6 ↗
14. Kern WW (1984) Semicond Int 7:94
15. Aguiar M, Akcelrud L, Pinto MR, Atvars TDZ, Karasz FE, Saltiel J (2003) J Photosci 10:149
16. Cumpston BH, Jensen KF (1996) Trends Polym Sci 4:151
17. Marletta A, Castro FA, Borges CAM, Oliveira ON Jr, Faria RM, Guimaraães FEG (2002) Macromolecules 35:910510.1021/ma020434+ ↗
18. Yu J, Fann WS, Kao FJ, Yang DY, Lin SH (1994) Synth Met 66:14310.1016/0379-6779(94)90091-4 ↗
19. Yu J, Hayashi M, Lin SH, Liang KK, Hsu JH, Fann WS, Chao CI, Chuang KR, Chen SA (1996) Synth Met 82:15910.1016/S0379-6779(96)03784-8 ↗
20. Cornil J, Beljonne D, Heller CM, Campbell IH, Laurich BK, Smith DL, Bradley DDC, Mullen K, Bredas JL (1997) Chem Phys Lett 278:13910.1016/S0009-2614(97)00986-X ↗
21. Marletta A, Akcelrud L (2009) J Lumin 129:67210.1016/j.jlumin.2009.01.012 ↗
22. Tozoni JR, Guimarães FEG, Atvars TDZ, Nowacki B, Akcelrud L, Bonagamba TJ (2009) Eur Polym J 45:246710.1016/j.eurpolymj.2009.04.015 ↗