journal article·2004-11

Scanning electron acoustic microscopy (SEAM): A technique for the detection of contact-induced surface & sub-surface cracks

T. F. Page, B. A. Shaw

Journal of Materials Science· Volume 39· Issue 22
Publisher page

Abstract

A variant of the scanning acoustic microscopy technique, scanning electron acoustic microscopy (SEAM), uses a pulsed electron beam in a conventional scanning electron microscope (SEM) to generate elastic waves near the surface of the sample. Conveniently for studies of surface damage, the contrast-generating processes are at a depth commensurate with the thickness of many thin hard ceramic coatings and the typical depths of fatigue-induced cracks in both gears and rolling element bearing systems. Using examples from our studies of contact damage induced in thin hard coated systems and gears, this paper will demonstrate the applicability of SEAM techniques to the study of near-surface damage in coated systems (coating fracture and debonding) and gears (fatigue damage). We show that clear contrast can arise from cracks oriented both parallel to and, sometimes, perpendicular to the surfaces of many samples, and show that useful information can be provided regarding the debonding of coatings. It has also been found possible to delineate sub-surface contact and contact fatigue cracks allowing some information regarding crack orientation and extent to be deduced without the need for either serial or vertical sectioning of the sample.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermography and Photoacoustic Techniques · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. R. GILMORE, in"Concise Encyclopedia of Materials Characterisation," edited by R. W. Cahn and E. Lifshin (Pergamon, Oxford, 1993) p. 4.
2. D. E. W. STONE and B. CLARKE, in"Concise Encyclopedia of Materials Characterisation," edited by R. W. Cahn and E. Lifshin (Pergamon, Oxford, 1993) p. 58.
3. G. A. D. BRIGGS,"Acoustic Microscopy" (Oxford University Press, Oxford, 1992).
4. D. E. NEWBURY, D. C. JOY, P. ECHLIN, C. E. FIORI and J. I. GOLDSTEIN,in "Advanced Scanning Electron Microscopy and Microanalysis" (Plenum, New York, 1986) p. 45.10.1007/978-1-4757-9027-6_2 ↗
5. T. F. PAGE, Inst. Phy. Conf. Ser. (UK) 138 (1993) 295.
6. F. I. HUMPHRIES, J. Microscopy 195 (1999) 170.10.1046/j.1365-2818.1999.00578.x ↗
7. B. A. SHAW, J. T. EVANS and T. F. PAGE, J. Mats. Sci. iLetts. 13 (1994) 1551.10.1007/BF00626506 ↗
8. T. F. PAGE, "Festschrift for Sir Robert Honeycombe," edited by J. A. Charles and G. C. Smith (The Institute of Materials, London, 1992) p. 337.
9. D. G. DAVIES, Phil. Trans. Roy. Soc. Lond. iA 320 (1986) 243.10.1098/rsta.1986.0114 ↗
10. L. J. BALK, Adv. Electron Electron. Phys. 71 (1988) 1.10.1016/S0065-2539(08)60900-2 ↗
11. E. BRANDIS and A. ROSENCWAIG, Appl. Phys. Lett. i 37 (1980) 98.10.1063/1.91718 ↗
12. G. S. CARGILL, Nature, Lonid. 286 (1980) 690.
13. A. ROSENCWAIG, in"Scanned Image Microscopy," edited by A. E. Ash (Academic Press, London, 1980) p. 291.
14. Idem., Scann. Electron. Microsc. IV (SEM, Inc. Chicago) (1984) 1611.
15. L. J. BALK, M. DOMNIK and M. SCHOTTLER, Inst. Phys. iConf. Ser. (UK) 93 (1988) 219.
16. G. S. CARGILL, in"Scanned Image Microscopy," edited by E. A. Ash (Academic Press, London, 1980) p. 319.
17. A. ROSENCWAIG, Science i 218 (1982) 223.10.1126/science.218.4569.223 ↗
18. A. ROSENCWAIG and R. M. WHITE, Appl. Phys. Letts. i 38 (1981) 165.10.1063/1.92288 ↗
19. M. K. THOMAS, R. C. FARROW and D. C. JOY, Bell Labs Report TM 82-11526-9 (1982).
20. D. C. JOY, Inst. Phys. Conf. Series 93(1988) 23.
21. L. J. BALK, D. G. DAVIES and N. KULTSCHER, Phys. iStatus Solidi A 82 (1984) 23.10.1002/pssa.2210820103 ↗
22. E. D. BOYES, Inst. Phys. Conf. Seri. 98 (1989) 439.
23. D. C. JOY,"Monte Carlo Modelling for Electron Microscopy and Microanalysis" (Oxford University Press, Oxford, 1995).10.1093/oso/9780195088748.001.0001 ↗
24. T. F. PAGE and P. M. RAMSEY, unpublished work.
25. J. C. KNIGHT, T. F. PAGE and H. W. CHANDLER, Surf. iCoat. Tech. 49 (1991) 519.10.1016/0257-8972(91)90111-9 ↗
26. P. M. RAMSEY and T. F. PAGE, unpublished work.
27. J. C. KNIGHT, T. F. PAGE, H. W. CHANDLER and P. M. RAMSEY in "Designing Ceramic Interfaces II," edited by S. D. Peteves (Official Publication of the EC, Physical Sciences EUR 15306, 1993) p. 253.
28. J. C. KNIGHT and T. F. PAGE, Surf. Coat. Tech. 53 (1992) 121.10.1016/0257-8972(92)90113-O ↗
29. S. V. HAINSWORTH, M. R. MCGURK and T. F. PAGE,ibid. 102 (1998) 97.10.1016/S0257-8972(97)00683-X ↗
30. P. C. TWIGG and T. F. PAGE, ibid. 68/69 (1994) 453.