An etching characterization method for revealing the plastic deformation zone in a SUS303 stainless steel
Source abstract
Abstract
Etching characteristics used to reveal localized plastic deformation zones in a SUS303 stainless steel have been examined. The etching was conducted on a sample using an etchant consisting of 5-g ferric chloride, 50-mL hydrochloric acid, and 100-mL water. The sample was deformed severely and heated to various temperatures before the etching process. With this etching technique, the plastically deformed area is clearly observed even at low magnification. This is due to a change of the microstructural characteristics in the plastic deformation zone. There are different microstructure patterns that reveal the plastic zone in the sample with and without heating, e.g., plastic zone in the sample with heating to 800 °C is observed clearly due to randomly oriented crystals and recrystallized small grains with precipitated nano-size particles. Details of the etching characteristics that reveal the plastic deformation zone are further discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Fry A (1921) Stahl Eisen 41:1093
2. Morris CE (1949) Metal Progress 56:696
3. Hundy BB (1954) Metallurgia 49:109
4. Green AP, Hundy BB (1956) J Mech Phys Solids 4:12810.1016/0022-5096(56)90085-0 ↗
5. Green AP (1956) J Mech Phys Solids 4:25910.1016/0022-5096(56)90035-7 ↗
6. Birol Y (1988) Metallography 21:7710.1016/0026-0800(88)90038-9 ↗
7. Frühauf J, Gärtner E, Jänsch E (1999) Appl Phys A 68:67310.1007/s003390050959 ↗
8. Meguid SA (1978) Metallography 11:21110.1016/0026-0800(78)90038-1 ↗
9. Tucker CM (1930) Met Alloys 1:655
10. Okayasu M, Wang Z, Chen DL (2005) Mater Sci Technol 21:53010.1179/174328405X36511 ↗
11. Okayasu M, Sato K, Mizuno M (2008) J Mater Sci 43:2792. doi: 10.1007/s10853-008-2544-y10.1007/s10853-008-2544-y ↗
12. Okayasu M, Shin DH, Mizuno M (2008) Mater Sci Eng A 474:14010.1016/j.msea.2007.04.011 ↗
13. Okayasu M, Sato K, Mizuno M (2010) Mater Sci Technol (in press)
14. Wu X, Pan X, Mabon JC, Li M, Stubbins JF (2006) J Nucl Mater 356:7010.1016/j.jnucmat.2006.05.047 ↗
15. Jia N, Peng RL, Chai GC, Johansson S, Wang YD (2008) Mater Sci Eng A 491:42510.1016/j.msea.2008.02.021 ↗
16. Chen X, Wang Y, Gong M, Xia Y (2004) J Mater Sci 39:4869. doi: 10.1023/B:JMSC.0000035327.55210.9910.1023/B:JMSC.0000035327.55210.99 ↗
17. Randle V (2003) Microtexture determination and its applications, 2nd edn. Money, London
18. ANSYS Inc. (1999) ANSYS Contact technology guide
19. Talonen J, Hanninen H (2007) Acta Mater 55:610810.1016/j.actamat.2007.07.015 ↗
20. Durlu TN (1992) J Mater Sci Lett 11:70210.1007/BF00728912 ↗
21. Youliang HE, Stéphane G, Pascal JJ, John JJ (2006) Metall Mater Trans A 37:264110.1007/BF02586099 ↗