A thermomechanical modeling approach of the structural changes in semi-crystalline polymers under elongational strain
Source abstract
Abstract
Different polymer processing techniques, like thermoforming, cast film, or spinning, involve deformation of the material in a rubber-like state. In the case of semi-crystalline materials the processing temperature can be near but lower than the melting point. Moreover, in these processes, elongational strains are generally very high which lead to important crystalline evolution and orientation. Concomitantly, the thermomechanical behavior of the film is linked to the morphological evolving and the crystalline orientation due to the strain. In the present work, the elongational behavior was studied for a polypropylene film at temperatures between 110 and 140 °C and constant elongation rates. Based on a two-phase approach (amorphous and crystalline), a thermomechanical modeling of the stress curves is proposed including the fragmentation and the fibrils formation mechanisms. Particularly, the originality of the model consists in taking into account the fibrils contribution to the stress only as far as they are generated. As a consequence the model takes an integral form. However, despite the simplicity of this approach, the stress curves are described relatively well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Rheology and Fluid Dynamics Studies · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Breese DR, Beaucage G (2004) Curr Opin Solid State Mater Sci 8:43910.1016/j.cossms.2005.08.001 ↗
2. Takayanagi M (1963) Mem Fac Eng Kyushu Univ 23:41
3. Smith JB, Davies GR, Cappaccio G, Ward IM (1975) J Polym Sci Pol Phys 13:233110.1002/pol.1975.180131208 ↗
4. Hosemann RJ (1963) Appl Phys 34:2510.1063/1.1729085 ↗
5. G’Sell C, Jonas JJ (1981) J Mater Sci 16:1956. doi: 10.1007/BF0054064410.1007/BF00540644 ↗
6. Keller A, Pope DP (1971) J Mater Sci 6:453. doi: 10.1007/BF0055030210.1007/BF00550302 ↗
7. Point DD, Dosière M, Gillot M, Goffin-Gérin A (1971) J Mater Sci 6:479. doi: 10.1007/BF005503054810.1007/BF00550303 ↗
8. Owen AJ, Ward IM (1971) J Mater Sci 6:485. doi: 10.1002/actp.1997.01048050210.1007/BF00550304 ↗
9. Halpin JC, Kardos JL (1972) J Appl Phys 43:223510.1063/1.1661482 ↗
10. Breese DR, Beaucage G (2008) J Polym Sci Pol Phys 46:60710.1002/polb.21396 ↗
11. Peterlin A (1971) J Mater Sci 6:485. doi: 10.1007/BF0145166510.1007/BF00550304 ↗
12. Peterlin A (1975) Colloid Polym Sci 253:80910.1007/BF01452401 ↗
13. Young RJ (1974) Philos Mag 30:8510.1080/14786439808206535 ↗
14. Bowden PB, Young RJ (1974) J Mater Sci 9:2034. doi: 10.1007/BF0054055310.1007/BF00540553 ↗
15. Séguéla R (2007) e-Polymers 03210.1088/1126-6708/2007/07/032 ↗
16. Lee BJ, Argon AS, Parks DM, Ahzi S, Bartczak Z (1993) Polymer 34:355510.1016/0032-3861(93)90039-D ↗
17. Nikolov S, Doghri I (2000) Polymer 41:188310.1016/S0032-3861(99)00330-4 ↗
18. Van Dommelen JAW, Parks DM, Boyce MC, Brekelmans WAM, Baaijens FPT (2003) J Mech Phys Solids 51:51910.1016/S0022-5096(02)00063-7 ↗
19. Bédoui F, Diania J, Régnier G (2004) Polymer 45:243310.1016/j.polymer.2004.01.028 ↗
20. Detrez F, Cantournet S, Seguela R (2011) Polymer 52:199810.1016/j.polymer.2011.03.012 ↗
21. Dahoun A, Canova GR, Molinari A, Philippe MJ, G’Sell C (1991) Texture Microstruct 14–18:34710.1155/TSM.14-18.347 ↗
22. G’Sell C, Dahoun A (1994) Mater Sci Eng A175:18310.1016/0921-5093(94)91058-8 ↗
23. Dahoun A, Aboulfaraj A, G’Sell C, Molinari A, Canova GR (1995) Polym Eng Sci 35:31710.1002/pen.760350406 ↗
24. Hong K, Rastogi A, Strobl G (2004) Macromolecules 37:1016510.1021/ma049174h ↗
25. Hong K, Rastogi A, Strobl G (2004) Macromolecules 37:1017410.1021/ma049172x ↗
26. Thévenon A, Fulchiron R (2013) Macromol Mater Eng. doi: 10.1002/mame.2013.00.043
27. Schneider K (2010) J Polym Sci Pol Phys 48:157410.1002/polb.21971 ↗
28. Bird RB, Armstrong RC, Hassager O (1987) dynamics of polymeric liquids vol 1 Fluid Mechanics 2nd edn. Wiley, New York
29. Eckstein A, Friedrich C, Lobbrecht A, Spitz R, Mulhaupt R (1997) Acta Polym 48:4110.1002/actp.1997.010480107 ↗
30. Gahleitner M (2001) Prog Polym Sci 26:89510.1016/S0079-6700(01)00011-9 ↗
31. Lodge AS (1968) Rheol Acta 7:37910.1007/BF01984856 ↗
32. Fischer EW (1978) Pure Appl Chem 50:131910.1351/pac197850111319 ↗
33. O’Kane WJ, Young RJ (1995) J Mater Sci Lett 14:43310.1007/BF00274564 ↗
34. Crist B, Fisher CJ, Howard PR (1989) Macromolecules 22:170910.1021/ma00194a035 ↗
35. Kuvardina EV, Novokshonova LA, Lomakin SM, Timan SA, Tchmutin IA (2013) J Appl Polym Sci 128:141710.1002/app.38237 ↗
36. Tan S, Tinçer T (2012) J Appl Polym Sci 124:141910.1002/app.35162 ↗
37. Hartmann B, Jr Cole RF (1983) Polym Eng Sci 23:1310.1002/pen.760230104 ↗
38. Gent AN, Madan S (1989) J Polym Sci Pol Phys 27:152910.1002/polb.1989.090270713 ↗
39. O’Kane WJ, Young RJ, Ryan AJ (1995) J Macromol Sci-Phys B34:42710.1080/00222349508219502 ↗
40. Brooks NWJ, Mukhtar M (2000) Polymer 41:147510.1016/S0032-3861(99)00362-6 ↗
41. Séguéla R, Darras O (1994) J Mater Sci 29:5342. doi: 10.1007/BF0117154610.1007/BF01171546 ↗