journal article·2012-06

Quantifying uncertainty in load–hardness relationships

Andrew R. Portune, Corydon D. Hilton

Journal of Materials Science· Volume 47· Issue 12
Publisher page

Abstract

This article presents methodology for constructing a probability space that quantifies the load–hardness relationship in ceramics. Aspects of this space are indicative of uncertainties introduced by variations in material microstructure, instrument repeatability, and technician skill. The developed method is general in nature, and can be made specific to particular types of hardness measurements or equations used to describe the load–hardness relationship such as Meyer’s law, the modified proportional specimen resistance model, and others. Construction of the probability space is accomplished by applying Bayesian hypothesis testing to determine the likelihood function of critical parameters of the chosen load–hardness equation. A demonstration of this methodology is presented for Vickers hardness measurements made at four applied loads on tungsten carbide. The utility of the technique in quantifying microstructural uncertainty is shown using Knoop hardness datasets for aluminum oxynitride and two types of silicon carbide. Analysis of the normality of hardness values was shown to provide an objective criterion for determining when enough measurements have been made to adequately describe material behavior. The probability spaces constructed for each material were used to quantify uncertainty in the load–hardness curve that would extend to predictions regarding microstructural features or performance based on this relationship.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Ryge GR, Poley DE, Fairhurst CW (1960) J Dent Res 40:111610.1177/00220345610400060401 ↗
2. Mukhopadhyay NK (2005) J Mater Sci 40:241. doi: 10.1007/s10853-005-5718-x10.1007/s10853-005-5718-x ↗
3. Elmustafa AA, Eastman JA, Rittner MN, Weertman JR, Stone DS (2000) Scripta Mater 43:95110.1016/S1359-6462(00)00520-0 ↗
4. Elmustafa AA, Stone DS (2003) J Mech Phys Solids 51:35710.1016/S0022-5096(02)00033-9 ↗
5. Quinn JB, Quinn GD (1997) J Mater Sci 32:4331. doi: 10.1023/A:101867182305910.1023/A:1018671823059 ↗
6. McCauley J, Wilantewicz T (2008) In: Proceedings of the 26th army science conference
7. Krell A (1998) Int J Refract Metal Hard Mater 16:33110.1016/S0263-4368(98)00056-0 ↗
8. Wilantewicz T, McCauley J (2008) In: Advances in ceramic armor IV: ceramic engineering and science proceedings, Wiley, Hoboken
9. Swab J (2004) Int J Appl Ceram Technol 1:21910.1111/j.1744-7402.2004.tb00173.x ↗
10. Li H, Bradt RC (1996) J Mater Sci 31:106510.1007/BF00352908 ↗
11. Nix WD, Gao H (1998) J Mech Phys Solids 46:41110.1016/S0022-5096(97)00086-0 ↗
12. Gong J, Wu J, Guan Z (1998) Mater Lett 38:19710.1016/S0167-577X(98)00158-X ↗
13. Sangwal K (2009) Cryst Res Technol 44:101910.1002/crat.200900385 ↗
14. Lawn BR, Swain MV (1975) J Mater Sci 10:11310.1007/BF00541038 ↗
15. Meyer E (1908) Phys Z 9:66
16. Kim H, Kim T (2002) J Eur Ceram Soc 22:143710.1016/S0955-2219(01)00457-5 ↗
17. Thibault N, Nyquist H (1947) Trans Am Soc Met 38:271
18. ASTM Standard C1326–03 (2003) Standard test method for Knoop indentation hardness of advanced ceramics. ASTM International, West Conshohocken
19. ASTM Standard C1327–03 (2003) Standard test method for Vickers indentation hardness of advanced ceramics. ASTM International, West Conshohocken, PA
20. Vander Voort GF (1989) Results of an ASTM E-4 round robin on the precision and bias of measurements of microindentation hardness impressions, in factors that affect the precision of mechanical tests. American Society for Testing and Materials, Philadelphia, p 3
21. Tobolski EL (1989) Factors that affect the accuracy of indentation hardness tests, in factors that affect the precision of mechanical tests. American Society for Testing and Materials, Philadelphia, p 4610.1520/STP24011S ↗
22. Wilantewicz T, Cannon R, Quinn G (2007) The indentation size effect (ISE) for Knoop hardness in five ceramic materials. Advances in Ceramic Armor II, Hoboken, NJ
23. Hardle W, Huller M, Sperlich S, Werwatz A (2004) Nonparametric and semiparametric models: an introduction. Springer, Berlin10.1007/978-3-642-17146-8 ↗
24. McColm IJ (1990) Ceramic hardness. Plenum Press, New York10.1007/978-1-4757-4732-4 ↗
25. Gregory P (2005) Bayesian logical data analysis for the physical sciences. Cambridge University Press, Cambridge10.1017/CBO9780511791277 ↗
26. Wachtman JB, Cannon WR, Matthewson MJ (2009) Mechanical properties of ceramics. Wiley, Hoboken, NJ10.1002/9780470451519 ↗