journal article·2014-07

Composition-dependent fracture toughness of ROMP-based Dilulin/dicyclopentadiene copolymers

Hongyu Cui, Michael R. Kessler

Journal of Materials Science· Volume 49· Issue 14
Publisher page

Abstract

The fracture toughness of a series of ring-opening metathesis polymerization-based Dilulin/dicyclopentadiene (DCPD) copolymers was evaluated by utilizing the essential work of fracture method and the structure-fracture property relationship was thoroughly analyzed. Both dynamic mechanical analyzer and scanning electron microscope demonstrated a reaction-induced phase separation in the copolymers. The copolymers’ composition-dependent morphologies showed a significant effect on their fracture behavior. The maximum value for the essential work of fracture was found with Dil30DCPD70, which may be explained by their less heterogeneous structure and high cross-link density. The highest non-essential work of fracture was observed with samples made from Dil40DCPD60, which is possibly a consequence of the formation of a rigid DCPD-phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Advanced Polymer Synthesis and Characterization · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Eissen M, Metzger JO, Schmidt E, Schneidewind U (2002) 10 years after Rio—concepts on the contribution of chemistry to a sustainable development. Angew Chem Int Ed 41:414–436. doi: 10.1002/1521-3773(20020201)41:3<414:Aid-Anie414>3.0.Co;2-N10.1002/1521-3773(20020201)41:3<414::AID-ANIE414>3.0.CO;2-N ↗
2. Meier MAR, Metzger JO, Schubert US (2007) Plant oil renewable resources as green alternatives in polymer science. Chem Soc Rev 36:1788–1802. doi: 10.1039/B703294c10.1039/b703294c ↗
3. Henna P, Larock RC (2009) Novel thermosets obtained by the ring-opening metathesis polymerization of a functionalized vegetable oil and dicyclopentadiene. J Appl Polym Sci 112:1788–179710.1002/app.29574 ↗
4. Lu YS, Larock RC (2009) Novel polymeric materials from vegetable oils and vinyl monomers: preparation properties, and applications, ChemSusChem 2:136–14710.1002/cssc.200800241 ↗
5. Xia Y, Larock RC (2010) Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem 12:1893–190910.1039/c0gc00264j ↗
6. Xia Y, Lu YS, Larock RC (2010) Ring-opening metathesis polymerization (ROMP) of norbornenyl-functionalized fatty alcohols. Polymer 51:53–6110.1016/j.polymer.2009.11.011 ↗
7. Wu SH (1985) Phase-structure and adhesion in polymer blends—a criterion for rubber toughening. Polymer 26:1855–1863. doi: 10.1016/0032-3861(85)90015-110.1016/0032-3861(85)90015-1 ↗
8. Cotterell B, Reddel JK (1977) Essential work of plane stress ductile fracture. Int J Fracture 13:267–27710.1007/BF00040143 ↗
9. Borberg KB (1968) Critical review of some theories in fracture mechanics. Int J Fract Mech 4:11–1810.1007/BF00189139 ↗
10. Broberg KB (1975) Stable crack growth. J Mech Phys Solids 23:215–237. doi: 10.1016/0022-5096(75)90017-410.1016/0022-5096(75)90017-4 ↗
11. Mai YW, Cotterell B (1986) On the essential work of ductile fracture in polymers. Int J Fracture 32:105–125 doi: 10.1007/Bf0001978710.1007/BF00019787 ↗
12. Mai YW, Cotterell B, Horlyck R, Vigna G (1987) The essential work of plane-stress ductile fracture of linear polyethylenes. Polym Eng Sci 27:804–809 doi: 10.1002/pen.76027110610.1002/pen.760271106 ↗
13. KargerKocsis J (1996) For what kind of polymer is the toughness assessment by the essential work concept straightforward? Polym Bull 37:119–126 doi: 10.1007/Bf0031382710.1007/BF00313827 ↗
14. Wu JS, Mai YW (1996) The essential fracture work concept for toughness measurement of ductile polymers. Polym Eng Sci 36:2275–2288. doi: 10.1002/Pen.1062610.1002/pen.10626 ↗
15. Hashemi S (1997) Fracture toughness evaluation of ductile polymeric films. J Mater Sci 32:1563–1573 doi: 10.1023/A:101858270741910.1023/A:1018582707419 ↗
16. KargerKocsis J, Czigany T, Moskala EJ (1997) Thickness dependence of work of fracture parameters of an amorphous copolyester. Polymer 38:4587–4593. doi: 10.1016/S0032-3861(96)01061-010.1016/S0032-3861(96)01061-0 ↗
17. Mouzakis DE, Stricker F, Mulhaupt R, Karger-Kocsis J (1998) Fracture behaviour of polypropylene/glass bead elastomer composites by using the essential work-of-fracture method. J Mater Sci 33:2551–2562. doi: 10.1023/A:100434501710510.1023/A:1004345017105 ↗
18. Mauldin TC, Haman K, Sheng X, Henna P, Larock RC, Kessler MR (2008) Ring-opening metathesis polymerization of a modified linseed oil with varying levels of crosslinking. J Polym Sci Pol Chem 46:6851–6860doi: 10.1002/Pola.2299510.1002/pola.22995 ↗
19. Jones AS, Rule JD, Moore JS, White SR, Sottos NR (2006) Catalyst morphology and dissolution kinetics of self-healing polymers. Chem Mater 18:1312–131710.1021/cm051864s ↗
20. Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, Ithaca
21. Jeong W, Kessler MR (2008) Toughness enhancement in ROMP functionalized carbon nanotube/polydicyclopentadiene composites. Chem Mater 20:7060–7068 doi: 10.1021/Cm802094710.1021/cm8020947 ↗
22. Hill R (1952) On discontinuous plastic states, with special reference to localized necking in thin sheets. J Mech Phys Solids 1:19–30. doi: 10.1016/0022-5096(52)90003-310.1016/0022-5096(52)90003-3 ↗
23. Arkhireyeva A, Hashemi S (2002) Fracture behaviour of polyethylene naphthalate (PEN). Polymer 43:289–300. doi: 10.1016/S0032-3861(01)00623-110.1016/S0032-3861(01)00623-1 ↗
24. Karger-Kocsis J, Czigany T, Moskala EJ (1998) Deformation rate dependence of the essential and non-essential work of fracture parameters in an amorphous copolyester. Polymer 39:3939–3944 doi: 10.1016/S0032-3861(98)00029-910.1016/S0032-3861(98)00029-9 ↗
25. Arkhireyeva A, Hashemi S, O’Brien M (1999) Factors affecting work of fracture of uPVC film. J Mater Sci 34:5961–5974 doi: 10.1023/A:100477662738910.1023/A:1004776627389 ↗
26. Ching ECY, Li RKY, Mai YW (2000) Effects of gauge length and strain rate on fracture toughness of polyethylene terephthalate glycol (PETG) film using the essential work of fracture analysis. Polym Eng Sci 40:310–319 doi: 10.1002/Pen.1116410.1002/pen.11164 ↗
27. Levita G, Parisi L, Marchetti A, Bartolommei L (1996) Effects of thickness on the specific essential work of fracture of rigid PVC. Polym Eng Sci 36:2534–2541 doi: 10.1002/Pen.1065210.1002/pen.10652 ↗
28. Wu SH (1990) Chain structure Polym Eng Sci 30:753–761. doi: 10.1002/pen.76030130210.1002/pen.760301302 ↗
29. Satapathy BK, Lach R, Weidisch R, Schneider K, Janke A, Knoll K (2006) Morphology and crack toughness behaviour of nanostructured block copolymer/homopolyrner blends. Eng Fract Mech 73:2399–2412 doi: 10.1016/j.engfracmech.2006.04.01610.1016/j.engfracmech.2006.04.016 ↗
30. Satapathy BK, Weidisch R, Potschke P, Janke A (2005) Crack toughness behaviour of multiwalled carbon nanotube (MWNT)/polycarbonate nanocomposites. Macromol. Rapid Commun 26:1246–1252 doi: 10.1002/marc.20050023410.1002/marc.200500234 ↗
31. Agnelli A, Ramorino G, Passera S, Karger-Kocsis J, Ricco T (2012) Fracture resistance of rubbers with MWCNT, organoclay, silica and carbon black fillers as assessed by the J-integral: Effects of rubber type and filler concentration Express Polym Lett 6:581–587. doi: 10.3144/expresspolymlett.2012.6110.3144/expresspolymlett.2012.61 ↗