journal article·2004-01

A microstructural and mechanical study on the effects of carbon ion implantation on zirconia-toughened-alumina

M. E. Murphy, G. M. Insley, M. T. Laugier, D. Sutton, S. B. Newcomb

Journal of Materials Science· Volume 39· Issue 2
Publisher page

Abstract

Biomedical grade (>99.97% purity) alumina, zirconia and zirconia-toughened-alumina (ZTA) have been implanted with carbon ions at a dose of 5 × 1017 C ions/cm2 using an ion energy of 75 keV. The near-surface hardness of these bioceramics was examined using a load partial-unload indentation technique, both before and after implantation. The surfaces of the bioceramics have also been examined in cross-section using transmission electron microscopy (TEM) both before and after implantation and the implantation data correlated with a computer based simulation, TRIM (Transport and Range of Ions in Matter). The grinding and polishing treatment used prior to the implantation treatment has been found to have a strong influence on the surface microstructures for all three ceramics, although more significant modifications are brought about by carbon ion implantation. A comparison was made between the near-surface hardness of the unimplanted and carbon ion implanted surfaces of these bioceramics with relation to the modified microstructure. TEM examination of the implanted surfaces has demonstrated the formation of a sub-surface amorphous layer in all three materials as well as other microstructural modifications, such as microcracking and an increase in the near-surface dislocation density, that are characteristic of ion damage. The hardness data reveals that carbon ion implantation tends to decrease the surface hardness of alumina and zirconia with increasing ion dose, with a significant decrease occurring at the immediate near surface for both materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear materials and radiation effects · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. J. M. Dorlot, P. Christel and A. Meunier, J. Biomed. Mat. 23 (1989) 299.10.1002/jbm.820231405 ↗
2. D. Munz, R. T. Bubsey and J. L. Shannon, J. Amer. Ceram. Soc. 63 (1980) 300.10.1111/j.1151-2916.1980.tb10725.x ↗
3. C. Piconi, M. Labanti, G. Magnani, M. Caporale, G. Maccauro and G. Magliocchetti, Biomaterials 20 (1999) 1637.10.1016/S0142-9612(99)00028-9 ↗
4. A. Muchtar and L. C. Lim, Acta Mater. 46 (1998) 1683.10.1016/S1359-6454(97)00371-6 ↗
5. G. Willmann, Bioceramics 6 (1993) 38.
6. C. Piconi and G. Maccauro, Biomaterials 20 (1999) 1.10.1016/S0142-9612(98)00010-6 ↗
7. R. C. Garvie, C. Urbani, D. R. Kennedy and J. C. McNeuer, J. Mat. Sci. 19 (1984) 3224.10.1007/BF00549808 ↗
8. Y. Murase and E. Kato, J. Amer. Ceram. Soc. 66 (1983) 196.10.1111/j.1151-2916.1983.tb10016.x ↗
9. S. Affatato, M. Goldoni, M. Testoni and A. Toni, Biomaterials 22 (2001) 717.10.1016/S0142-9612(00)00235-0 ↗
10. J. F. Li and R. Watanabe, J. Amer. Ceram. Soc. 81 (1998) 2687.10.1111/j.1151-2916.1998.tb02677.x ↗
11. Y. J. He, A. J. Winnubst, A. J. Burggraaf, H. Verweij, P. G. Van Der Varst and G. De With, J. Eur. Ceram. Soc. (1997) 1371.
12. F. Z. Cui and Z. S. Luo, Surf. Coat. Technol. 112 (1999) 278.10.1016/S0257-8972(98)00763-4 ↗
13. J. Rieu, A. Pichat, L. M. Rabbe, A. Rambert, C. Chabrol and M. Robelet, Mater. Sci. Technol. 8 (1992) 589.10.1179/mst.1992.8.7.589 ↗
14. P. J. Burnett and T. F. Page, J. Mater. Sci. 19 (1984) 3524.10.1007/BF02396926 ↗
15. F. Halitim, N. Ikhlef, L. Boudoukha and G. Fantozzi, Thin Solid Films 300 (1997) 197.10.1016/S0040-6090(96)09492-8 ↗
16. F. Brenscheidt, W. Matz, E. Wieser and W. Moller, Surf. Coat. Technol. 110 (1998) 188.10.1016/S0257-8972(98)00699-9 ↗
17. J. Tian, Q. Wang and Q. Xue, Nucl. Inst. Meth. Phy. Res. B 143 (1998) 488.10.1016/S0168-583X(98)00416-9 ↗
18. E. Smethurst and R. B. Waterhouse, J. Mater. Sci. 12 (1977) 1781.10.1007/BF00566238 ↗
19. W. C. Oliver and G. M. Pharr, J. Mat. Res. 7 (1992) 1564.10.1557/JMR.1992.1564 ↗
20. J. F. Ziegler, J. P. Biersack and U. Littmark, “The Stopping and Range of Ions in Solids” (Pergamon, New York, 1985).
21. B. J. Inkson, Acta Mater. 48 (2000) 1883.10.1016/S1359-6454(99)00468-1 ↗
22. L. Pranevicius, K. F. Badawi, N. Durand, J. Delaford and P. Goudeau, Surf. Coat. Technol. 71 (1995) 254.10.1016/0257-8972(94)02321-G ↗
23. H. Z. Wu, C. W. Lawrence, S. G. Roberts and B. Derbythe, Acta Mater. 46 (1998) 383.
24. L. Lawrence, L. Lil and J. T. Spencer, Surf. Coat. Technol. 115 (1999) 273.10.1016/S0257-8972(99)00251-0 ↗
25. T. Hioki, A. Itoh, M. Ohkubo, S. Noda, H. Doi, J. Kawamoto and O. Kamigaito, J. Mater. Sci. 21 (1986) 1321.10.1007/BF00553270 ↗
26. C. J. McHargue, C. W. White, B. R. Appleton, G. C. Farlow and J. M. Williams, Mater. Res. Soc. Symp. Proc. 27 (1984) 385.10.1557/PROC-27-385 ↗
27. F. Halitim, S. Paletto, G. Fantozzi and D. Treheux, J. Eur. Ceram. Soc. 15 (1995) 833.10.1016/0955-2219(95)00055-Y ↗
28. S. B. Newcomb, Private Commun. (2001).
29. C. J. McHargue, Mater. Sci. Eng. A 253 (1998) 94.10.1016/S0921-5093(98)00714-X ↗
30. P. J. Burnett and T. F. Page, J. Mater. Sci. 20 (1985) 4624.10.1007/BF00559353 ↗
31. L. Boudoukha, S. Paletto and G. Fantozzi, Nucl. Inst. Meth. Phy. Res. B 108 (1996) 87.10.1016/0168-583X(95)00854-3 ↗
32. H. G. Jang, H. B. Kim, J. H. Joo, C. N. Whang, H. K. Kim, D. W. Moon, J. J. Woo and S. O. Kim, Nucl. Inst. Meth. Phy. Res. B 124 (1997) 528.10.1016/S0168-583X(97)00100-6 ↗
33. C. J. McHargue, G. C. Farlow, C. W. White, J. M. Williams, B. R. Appleton and H. Naramoto, Mater. Sci. Eng. 69 (1985) 123.10.1016/0025-5416(85)90382-9 ↗
34. S. J. Bull and T. F. Page, J. Mater. Sci. 23 (1988) 4217.10.1007/BF00551911 ↗
35. L. Cliche, S. Roorda and R. A. Masut, Nucl. Inst. Meth. Phy. Res. B 96 (1995) 319.10.1016/0168-583X(94)00509-5 ↗
36. L. M. Howey and M. H. Rainville, ibid. 19/20 (1987) 61.10.1016/S0168-583X(87)80015-0 ↗
37. P. J. Burnett and T. F. Page, Amer. Ceram. Soc. Bull. 65 (1986) 1393.
38. L. Boudoukha, S. Paletto, F. Halitim and G. Fantozzi, Nucl. Inst. Meth. Phy. Res. B 122 (1997) 233.10.1016/S0168-583X(96)00724-0 ↗
39. Y. Miyagawa, S. Nakao, K. Baba, R. Hatada, M. Ikeyama and S. Miyagawa, Surf. Coat. Technol. 103/104 (1998) 323.10.1016/S0257-8972(98)00408-3 ↗
40. K. E. Sickafus, H. Matzke, T. Hartmann, K. Yasuda, J. A. Valdez, P. Chodak, M. Nastasi and R. A. Verrall, J. Nucl. Mater. 274 (1999) 66.10.1016/S0022-3115(99)00041-0 ↗
41. N. Sasajima, T. Matsui, K. Hojou, S. Furuno, H. Otsu, K. Izui and T. Muromura, Nucl. Inst. Meth. Phy. Res. B 141 (1998) 487.10.1016/S0168-583X(98)00194-3 ↗
42. L. M. Wang, S. X. Wang, S. Zhu and R. C. Ewing, J. Nucl. Mater. 289 (2001) 122.10.1016/S0022-3115(00)00691-7 ↗
43. M. E. Murphy, Thesis: The Use of Ion Implantation for Biomedical Applications, University of Limerick, Ireland, 2002.
44. C. Piconi, W. Burger, H. G. Richter, A. Cittadini, G. Maccauro, V. Covacci, N. Bruzzese, G. A. Ricci and E. Marmo, Biomaterials 19 (1998) 1489.10.1016/S0142-9612(98)00064-7 ↗
45. T. K. Gupta, F. F. Lange and J. H. Bechtold, J. Mater. Sci. 13 (1978) 1464.10.1007/BF00553200 ↗