Aqueous electrophoretic deposition as a method for producing an investment casting shell mould ceramic face-coat. Part 1: formation of a carbon-filled investment casting wax electrode material
Source abstract
Abstract
Aqueous electrophoretic deposition (EPD), using a zircon, i.e., zirconium silicate (ZrSiO4) suspension, has been investigated as an alternative to the conventional slurry dip-coating process for producing the face-coat of investment casting ceramic shell moulds. This is because EPD has the potential to (a) increase dimensional tolerances in the resultant casting, and (b) form a uniform face-coat on the entire mould-surface of complex shell moulds, including the small and/or complex cavities that are a problem for conventional dip-coating. Part 1 of this work addresses the formation of carbon-filled investment casting wax composite electrode materials. A carbon black powder and a micronised graphite powder were used as the alternative fillers in a water-emulsified pattern wax, an unfilled pattern wax and an unfilled runner wax. The runner wax composites exhibited consistently higher resistivities for both filler types and across the range of filler concentrations. Electrical resistivities of 1200 and 240 Ω cm were attained for the 16 vol% micronised graphite-filled and carbon black-filled straight pattern wax composites, respectively. The higher conductivity values associated with the use of carbon black filler are attributed to its high-surface area and hierarchical agglomerated structure. Rheologically, the micronised graphite-filled runner wax and water-emulsified pattern wax composites followed the Krieger–Dougherty model, which is helpful given that investment casting waxes are invariably injection moulded. In summary, these results confirm, in conjunction with Part 2, the feasibility of developing EPD as a promising technique for forming the investment casting shell mould ceramic face-coat.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Additive Manufacturing and 3D Printing Technologies · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Wolz S (2009) US Patent Application No: 20090255813
2. Uchikoshi T, Furumi S, Shirahata N, Suzuki TS, Sakka Y (2008) J Am Ceram Soc 91(5):167410.1111/j.1551-2916.2007.02228.x ↗
3. Wang K.-C., Hu C.-M. (2003) US Patent No: 6623662
4. Pinto G, López-González C, Jiménez-Martín A (1999) Polym Compos 20(6):80410.1002/pc.10404 ↗
5. Chan Chi-Ming, Cheng Chi-Leung, Yuen MMF (1997) Polym Eng Sci 37(7):112710.1002/pen.11757 ↗
6. Guo-Hua Chen, Da-Jun Wu, Wen-Gui Weng, Bin He, Wen-li Yan (2001) Polym Int 50:98010.1002/pi.729 ↗
7. Chakrabarty RK, Bardhan KK, Basu A (1991) Phys Rev B 44(13):677310.1103/PhysRevB.44.6773 ↗
8. Piwonka TS, Woodbury KA, Wiest JM (2000) Mater Des 21(4):36510.1016/S0261-3069(99)00080-1 ↗
9. Grimmett G (1989) Percolation. Springer, New York10.1007/978-1-4757-4208-4 ↗
10. McLachlan DS, Blaszkiewicz M, Newnham RE (1990) J Am Ceram Soc 73(8):218710.1111/j.1151-2916.1990.tb07576.x ↗
11. Scarisbrick RM (1973) J Phys D Appl Phys 6:209810.1088/0022-3727/6/17/316 ↗
12. Kusy RP (1977) J Appl Phys 48(12):530110.1063/1.323560 ↗
13. Carbon Black User’s Guide, International Carbon Black Association (June 2004). http://www.carbon-black.org/user_guide.html . Accessed 2 May 2013
14. Uhlir A (1955) Bell Syst Tech J 34(1):105. http://www3.alcatel-lucent.com/bstj/vol34-1955/articles/bstj34-1-105.pdf . Accessed 2 May 201310.1002/j.1538-7305.1955.tb03765.x ↗
15. Geometric factors in four point resistivity measurement (1968) Bulletin No. 472–13, 2nd edn. Haldor Topsoe, Semiconductor division, Vedbaek, Denmark. http://www.four-point-probes.com/haldor.html#hal . Accessed 2 May 2013
16. Kaye GWC, Laby TH (1995) Tables of physical and chemical constants: 2.6.3 electrical insulating materials, 16th edn. http://www.kayelaby.npl.co.uk/general_physics/2_6/2_6_3.html Accessed 2 May 2013
17. Mezger TG (2006) The rheology handbook: for users of rotational and oscillatory rheometers. Vincentz Network GmbH & Co KG, Hannover
18. Barnes HA, Hutton JF, Walters K (1997) An introduction to rheology, vol 3. Elsevier, Amsterdam
19. King JA, Johnson BA, Via MD, Ciarkowski CJ (2009) J Appl Polym Sci 112(1):42510.1002/app.29422 ↗
20. Elias HG (2003) An introduction to plastics. Wiley, New York, p 136
21. Clarke B (1967) Chem Eng Res Des 45a:251
22. Pal R, Bhattacharya SN, Rhodes E (1986) Can J Chem Eng 64(1):310.1002/cjce.5450640102 ↗
23. Barnes HA (1981) Dispersion rheology 1980: a Survey of Industrial Problems and Academic Progress, R Soc Chem, Industrial Division, Burlington House, London, p 31