journal article·2004-07

Resistance of fibrous reinforced silver matrix composites to repeated make-break arc erosion

Chia-Jung Hsu, Shou-Yi Chang, Liang-Yu Chou, Su-Jien Lin

Journal of Materials Science· Volume 39· Issue 13
Publisher page

Abstract

The resistance of fibrous reinforced silver matrix composites to repeated make-break arc erosion has been investigated in this study. Three different types of short fibers were used as reinforcements, including graphite short fibers, Saffil short fibers, and silicon carbide whiskers. The weight losses of eroded composites increase with fiber content, applied current, and test number due to the worse thermal conductivity of the composites and the higher remained temperatures on contact surfaces. The composites reinforced with Saffil short fibers exhibit the best erosion resistance of all reinforcements in the study because of the small spacings between Saffil short fibers and the strengthening of strong short-fiber skeletons. The effective contribution of short fibers to arc erosion resistance depends on their sizes to construct small-spacing and deeply-embedded skeletons.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Material Properties and Applications · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. L. Morin, N. Ben Jemaa and D. Jeannot IEEE Trans. Comp. Pack. Technol. 23 (2000) 240.10.1109/6144.846760 ↗
2. P. Teste, T. Leblanc, R. Andlauer and J. P. Chabrerie Plasma Sources Sci. Technol. 10 (2001) 10.10.1088/0963-0252/10/1/302 ↗
3. A. M. Essiptchouk, A. Marotta and L. I. Sharakhovsky High Temp. Mater. Process 7 (2003) 29.10.1615/HighTempMatProc.v7.i1.50 ↗
4. B. J. Wang and N. Saka Wear 195 (1996) 133.10.1016/0043-1648(95)06816-3 ↗
5. H. H. Chung, R. T. Lee and Y. C. Chiou IEE Proc. Sci. Meas. Technol. 149 (2002) 172.10.1049/ip-smt:20020481 ↗
6. A. V. Nadkarni, J. E. Synk, P. S. Gilman and J. S. Benjamin, in “Metals Handbook”, 9th ed., Vol. 7, edited by K. Mills, J. R. Davis, S. K. Refsnes, and B. R. Sanders (American Society for Metals, Metals Park, OH, 1984) p. 710.
7. Z. K. Chen, T. Hayakawa and K. Sawa IEICE Trans. Electron. E81-C (1998) 435.
8. K. Sawa and M. Hasegawa ibid. E83-C (2000) 1363.
9. M. Takeuchi and T. Kubono ibid. E83-C (2000) 1377.
10. Z. Aslanoglu, Y. Karakas and M. L. Ovecoglu Intern. J. Pwder Metall. 36 (2000) 35.
11. Y. S. Shen, P. Lattari, J. Gardner and H. Weigard, in “Metals Handbook”, 10th ed., Vol. 2, edited by S. R. Lampman and T. B. Zorc (American Society for Metals, Metals Park, OH, 1990) p. 840.
12. K. H. Schroder IEEE Trans. Comp. Hybrids. Manufact. Technol. 10 (1987) 127.10.1109/TCHMT.1987.1134702 ↗
13. W. Rong, J. P. Tu and S. Y. Gu Mater. Sci. Forum 426 (2003) 2065.10.4028/www.scientific.net/MSF.426-432.2065 ↗
14. S. Y. Chang, J. H. Lin, S. J. Lin and T. Z. Kattamis Metall. Mater. Trans. A 30A (1999) 1119.10.1007/s11661-999-0164-z ↗
15. S. Y. Chang, C. J. Hsu, C. H. Hsu and S. J. Lin J. Mater. Res. 18 (2003) 804.10.1557/JMR.2003.0111 ↗
16. C. J. Hsu, S. Y. Chang, L. Y. Chou and S. J. Lin ibid. 18 (2003) 817.10.1557/JMR.2003.0112 ↗
17. K. K. Chawla, in “Composite Materials Science and Engineering” (Spriger-Verlag, New York, 1987) p. 177.
18. V. A. Greenhut, in “Metals Handbook,” 10th ed., Vol. 20, edited by S. R. Lampman and T. B. Zorc (American Society for Metals, Metals Park, OH, 1997) p. 428.