journal article·2002-07

Load controlled low cycle fatigue of [0]8 Sigma fibre reinforced titanium matrix composite

M. P. Thomas

Journal of Materials Science· Volume 37· Issue 14
Publisher page

Abstract

Fibre reinforced titanium matrix composites (TMCs) are being considered for use in future aeronautical gas-turbine compressor discs. Low cycle fatigue is thought to be one of the mechanisms most damaging to such a component. Here, the low cycle fatigue behaviour of Ti-6-4, reinforced with SM1140+ fibre, is investigated over the temperature range 22°C to 600°C. SN curves have a characteristic “S” shape and can be split into three regions. Fractography, acoustic emission monitoring and cyclic strain recording have elucidated damage mechanisms in each region. In region I (high cyclic stress) damage is caused by matrix creep, that leads to fibre failure. In region III (low cyclic stress), the predominant damage mechanism is matrix crack growth. Cracks initiate at surface machining damage and grow, bridged by intact fibres, into the bulk. The matrix crack growth transfers stress to fibres, eventually causing them to fail in overload, resulting in specimen failure. In region II (intermediate cyclic stress) damage is by a combination of the mechanisms observed in regions I and III. Comparison of Ti-6-4/SM1140+ with Ti-6-4/SCS-6 shows that fatigue lives are similar in regions II and III. In region I it is possible that Ti-6-4/SM1140+ has inferior lives to Ti-6-4/SCS-6.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. M. P. THOMAS, J. G. ROBERTSON and M. R. WINSTONE, J. Mater. Sci. 33 (1998) 3607.10.1023/A:1004655329112 ↗
2. M. P. THOMAS, S. BATE, J. G. ROGERTSON and M. R. WINSTONE, Mat. Sci. Tech. 14 (1998) 1009.10.1179/mst.1998.14.9-10.1009 ↗
3. M. C. MERIENNE and J. P. FAVRE, in Proceedings of the Third International Symposium on Acoustic Emission from Composite Materials-AECM-3 (American Society for Non-Destructive Testing, Ohio, 1989) p. 304.
4. K. TAKASHIMA, K. M. FOX, C. BARNEY, J. G. PURSELL and P. BOWEN, Mat. Sci. Tech. 12 (1996) 917.10.1179/mst.1996.12.11.917 ↗
5. R. L. BRETT, P. J. COTTERILL and P. BOWEN, Int. J. Fat. 18 (1996) 1.10.1016/0142-1123(95)00080-1 ↗
6. T. NICHOLAS, M. G. CASTELLI and M. L. GAMBONE, Scripta Materialia 36 (1997) 585.10.1016/S1359-6462(96)00425-3 ↗
7. S. MALL and T. NICHOLAS in “Titanium Matrix Composites: Mechanical Behavior” (Technomic Publishing, Pennsylvania, 1998) 169.
8. S. M. JENG, P. ALASSEUR, J. M. JANG and S. AKSOY, Mat. Sci. Eng. A 148 (1991)67.10.1016/0921-5093(91)90866-L ↗
9. I. GREAVES, J. R. YATES and H. V. ATKINSON, Composites 25 (1994) 692.10.1016/0010-4361(94)90203-8 ↗
10. E. R. DE LOS RIOS, C. A. RODOPOULOS and J. R. YATES, Fat. Fract. Eng. Mat. Struct. 19 (1996) 539.10.1111/j.1460-2695.1996.tb00990.x ↗
11. J. H. TWEED, J. COOK, N. L. HANCOCK, R. J. LEE and R. F. PRESTON, in AGARD Report 796, paper 20 (NATO AGARD, France, 1994).
12. B. P. SANDERS, S. MALL and R. B. PITTMAN, Comp. Sci. Tech. 59 (1999) 583.10.1016/S0266-3538(98)00100-6 ↗
13. S. M. JENG, J. M. YANG and S. AKSOY, Mat. Sci. Eng. A 156 (1992) 117.10.1016/0921-5093(92)90143-O ↗
14. D. D. ROBERTSON, S. MALL and S. M. LEE, J. Comp. Tech. Res. 20 (1998) 120.10.1520/CTR10052J ↗
15. P. LIPETZKY, G. J. DVORAK and N. S. STOLOFF, Scripta Mater. 35 (1996) 1089.10.1016/1359-6462(96)00255-2 ↗
16. B. P. SANDERS, S. MALL and S. C. JACKSON, Int. J. Fat. 21 (1999) 121.10.1016/S0142-1123(98)00059-0 ↗
17. A. VASSEL, F. PAUTONNIER and M. H. VIDAL-SETIF, in “Test Techniques for Metal Matrix Composites” (Institute of Physics, Bristol, 1991) p. 55.
18. Y. LEPETITCORPS, M. LAHAYE, R. PAILLER and R. NASLAIN, Comp. Sci. Tech. 32 (1988) 31.10.1016/0266-3538(88)90028-0 ↗
19. R. A. SHATWELL, Mat. Sci. Tech. 10 (1994) 552.10.1179/mst.1994.10.6.552 ↗
20. S. Q. GUO, Y. KAGAWA, Y. TANAKA and C. MASUDA, Acta Mater. 46 (1998) 4941.10.1016/S1359-6454(98)00181-5 ↗
21. W. O. SOBOYEJO, B. M. RABEETH and P. KANTZOS, Mat. Sci. Eng. A200 (1995) 140.10.1016/0921-5093(95)07018-4 ↗
22. B. S. MAJUNDAR and G. M. NEWAZ, Phil.Mag.A 66 (1992) 187.10.1080/01418619208201551 ↗
23. R. T. BHATT and H. H. GRIMES, Met. Trans. 13A (1982) 1933.10.1007/BF02645938 ↗
24. B. P. SANDERS and S. MALL, J. Comp. Tech. Res. 16 (1994) 304.10.1520/CTR10590J ↗
25. Y. TANAKA, Y. KAGAWA, C. MASUDA, Y. F. LIU and S. Q. GUO, Met. Trans. 30A (1999) 221.10.1007/s11661-999-0210-x ↗
26. T. P. GABB, J. GAYDA and R. A. MACKAY, J. Comp. Mat. 24 (1990) 667.10.1177/002199839002400605 ↗
27. M. P. THOMAS and M. R. WINSTONE, Comp. Sci. Tech. 59 (1999) 297.10.1016/S0266-3538(98)00072-4 ↗
28. T. P. GABB, J. GAYDA, B. A. LERCH and G. R. HALFORD, Scripta Metall. 25 (1991) 2879.10.1016/0956-716X(91)90173-X ↗
29. M. P. THOMAS, Composite Science and Technology, in press.
30. A. FUKUSHIMA, C. FUJIWARA, Y. KAWACHI and K. YASUHIRA, in Proceedings of ICCM-12: Twelfth International Conference on Composite Materials, CD ROM Proceedings (ICCM12/TCA, Paris, 1999).
31. J. GAYDA, T. P. GABB and B. A. LERCH, Int. J. Fat. 15 (1993) 41.10.1016/0142-1123(93)90076-3 ↗
32. D. P. WALLS, G. BAO and F. W. ZOK, Acta Metall. 41 (1993) 2061.10.1016/0956-7151(93)90375-3 ↗
33. D. D. ROBERTSON and S. MALL, in Proceedings of ICCM-11: Eleventh International Conference on Composite Materials, CD ROM Proceedings, edited by M. L. Scott (Australian Composite Structures Society, Melbourne, 1997) Vol. 3, p. 317.
34. D. HARMON, K. L. JERINA and S. M. L. SASTRY, J. Comp. Mat. 31 (1997) 534.10.1177/002199839703101504 ↗
35. D. L. KRAABEL, B. P. SANDERS and S. MALL, Comp. Sci. Tech. 57 (1997) 99.10.1016/S0266-3538(96)00113-3 ↗
36. B. S. MAJUMDAR and G. M. NEWAZ, Mat. Sci. Eng. A 200 (1995) 114.10.1016/0921-5093(95)07010-9 ↗
37. P. C. WANG, S. M. JENG and J. M. YANG, ibid. A 200 (1995) 173.10.1016/0921-5093(95)07011-7 ↗
38. S. G. WARRIER, B. MARUYAMA, B. S. MAJUMDAR and D. B. MIRACLE,ibid. A259 (1999) 189.10.1016/S0921-5093(98)00891-0 ↗
39. T. NICHOLAS and S. M. RUSS, ibid. A 153 (1992) 514.10.1016/0921-5093(92)90245-V ↗
40. M. P. THOMAS and M. R. WINSTONE, Scripta Materialia 37 (1997) 1855.10.1016/S1359-6462(97)00379-5 ↗