journal article·2015-11

Fabrication of variable frequency motors using polyester-imide-hybridized resins and hyperbranched polysiloxane coated nano-TiO2

Cheng Zhou, Guozheng Liang, Aijuan Gu

Journal of Materials Science· Volume 50· Issue 22
Publisher page

Abstract

The key for fabricating variable frequency motors is to develop high-performance resins that not only have excellent corona resistance and high breakdown strength, but also are suitable for vacuum pressure impregnation (VPI) technique; however, few resins simultaneously possess these features. Herein, a series of unique hybridized resins based on polyester-imide resin (EPEI) and hyperbranched polysiloxane coated nano-TiO2 (HSi-TiO2) were prepared, and their structure, processing characteristics, corona resistance, and high breakdown strength were investigated systematically. Results show that EPEI/HSi-TiO2-hybridized resins have excellent storage stability and are suitable for VPI, completely overcoming the disadvantages of traditional nanofiller-modified resins. In addition, the presence of HSi-TiO2 changes the microstructure of crosslinked network, endowing EPEI/HSi-TiO2-hybridized resins with outstanding corona resistance, high breakdown strength, and remarkably decreased partial discharge. The maximum corona--resistant life is 1586 min, about 57 times that of EPEI resin. As the content of HSi-TiO2 increases, the breakdown strength of the hybridized resin increases, and the maximum value is 28.1 kV/mm, 15.2 % higher than that of EPEI resin. These attractive performance characteristics demonstrate that EPEI/HSi-TiO2-hybridized resins have great potential in fabricating variable frequency motors and high-performance electric equipments. The origin behind these attractive performance characteristics possessed by EPEI/HSi-TiO2-hybridized resins was intensively discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Thermal Analysis in Power Transmission · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Ferguson LG, Dogan F (2002) Spectral analysis of transition metal-doped MgO “matched emitters” for thermophotovoltaic energy conversion. J Mater Sci 37:1301–1308. doi: 10.1023/A:101459992437210.1023/A:1014599924372 ↗
2. Harry L, Curiac RS (2012) Energy conservation: motor efficiency, efficiency tolerances, and the factors that influence them. IEEE Ind Appl Mag 18:62–68
3. Mihailovic D, Šaponjic Z et al (2011) Novel properties of PES fabrics modified by corona discharge and colloidal TiO2 nanoparticles. Polym Adv Technol 22:703–70910.1002/pat.1568 ↗
4. Vershinin AV, Dragomirov MS, Zaitsev AM, Kruglikov OV (2008) Development of embodiments of variable-frequency induction motors. Russ Electr Eng 79:624–62610.3103/S1068371208110072 ↗
5. Koktsinskaya YM, Vakser BD (2007) The effect of vacuum pressure impregnation on the properties of a nonlinear semiconducting tape coating for high-voltage electrical machines. Elektrichestvo 5:71–74
6. Drachev AI, Pak VM (2005) Corona-resistant dielectric based on polyimide film. Russ Electr Eng 76:57–59
7. Zha JW, Chen G, Dang ZM, Yin Y (2011) The influence of TiO2 nanoparticle incorporation on surface potential decay of corona-resistant polyimide nanocomposite films. J Electrostat 69:255–26010.1016/j.elstat.2011.04.001 ↗
8. Fang LJ, Wu C, Qian R, Xie LY et al (2014) Nano-micro structure of functionalized boron nitride and aluminum oxide for epoxy composites with enhanced thermal conductivity and breakdown strength. RSC Adv 4:21010–2101710.1039/c4ra01194e ↗
9. Soliveri G, Meroni D, Cappelletti G (2014) Engineered organic/inorganic hybrids for superhydrophobic coatings by wet and vapour procedures. J Mater Sci 49:2734–2744. doi: 10.1007/s10853-013-7976-310.1007/s10853-013-7976-3 ↗
10. Goh PS, Ismail AF, Ng BC (2014) Directional alignment of carbon nanotubes in polymer matrices: contemporary approaches and future advances. Compos Part A Appl Sci Manuf 56:103–12610.1016/j.compositesa.2013.10.001 ↗
11. Zeng CP, Xia Y, Wang W (2013) Application of epoxy-anhydride VPI resin with low viscosity in 5 MW permanent magnet synchronous wind generators. In: Electrical manufacturing and coil winding expo, pp 19–22
12. Cheng GJ, Qian JS, Miao JB, Yang B, Xia R, Chen P (2014) The surface modification of TiN nano-particles using macromolecular coupling agents, and their resulting dispersibility. Appl Surf Sci 301:79–8410.1016/j.apsusc.2013.12.098 ↗
13. Taguet A, Cassagnau P, Lopez-Cuesta JM (2014) Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends. Prog Polym Sci 39:1526–156310.1016/j.progpolymsci.2014.04.002 ↗
14. Peroutka Z (2003) Motor insulation breakdowns due to operation of frequency converters. IEEE Bologna Power Tech 2:299–306
15. Chiang WY, Chiang WC (1988) Condensation polymerization of multifunctional monomers and properties of related polyester resins. Thermal properties of polyester-imide varnishes. J Appl Polym Sci 35:1433–143910.1002/app.1988.070350603 ↗
16. Zhou C, Gu AJ, Liang GZ, Yuan L (2011) Novel toughened cyanate ester resin with good dielectric properties and thermal stability by copolymerizing with hyperbranched polysiloxane and epoxy resin. Polym Adv Technol 22:710–71710.1002/pat.1570 ↗
17. Wang DH, Tan LS, Huang HJ, Dai LM, Osawa EJ (2009) In-situ nanocomposite synthesis: arylcarbonylation and grafting of primary diamond nanoparticles with a poly(ether-ketone) in polyphosphoric acid. Macromolecules 42:114–12410.1021/ma8019078 ↗
18. Gershon AL, Cole DP, Kota AK, Bruck HA (2010) Nanomechanical characterization of dispersion and its effects in nano-enhanced polymers and polymer composites. J Mater Sci 45:6353–6364. doi: 10.1007/s10853-010-4597-y10.1007/s10853-010-4597-y ↗
19. Dalle VS, Oliveira F, Leterrier Y et al (2014) Effect of silane coupling agent on the morphology, structure, and properties of poly(vinylidene fluoride-trifluoroethylene)/BaTiO3 composites. J Mater Sci 49:4552–4564. doi: 10.1007/s10853-014-8155-x10.1007/s10853-014-8155-x ↗
20. Park OK, Kang YS (2005) Preparation and characterization of silica-coated TiO2 nanoparticle. Colloids Surf A Physicochem Eng Asp 257–258:261–26510.1016/j.colsurfa.2004.10.014 ↗
21. Umboh MK, Adachi T, Oishi K et al (2013) Mechanical properties of nano-silica particulate-reinforced epoxy composites considered in terms of crosslinking effect in matrix resins. J Mater Sci 48:5148–5156. doi: 10.1007/s10853-013-7300-210.1007/s10853-013-7300-2 ↗
22. Jancar J (2008) Review of the role of the interphase in the control of composite performance on micro- and nano-length scales. J Mater Sci 43:6747–6757. doi: 10.1007/s10853-008-2692-010.1007/s10853-008-2692-0 ↗
23. Ghosh S, Goswami SK, Mathias LJ (2013) Surface modification of nano-silica with amides and imides for use in polyester nanocomposites. J Mater Chem 1:6073–608010.1039/c3ta10381a ↗
24. Chen L, Tian ZF, Yang Y et al (2013) Study of novel solvent-free polyester-imide impregnating resin. Insul Mater 46:4–7
25. Marco M, Rosaria AM, Esposito CC et al (2014) Catalytic activity of graphite-based nanofillers on cure reaction of epoxy resins. Polymer 55:5612–561510.1016/j.polymer.2014.09.019 ↗
26. Ward IM, Hadley DW (1993) An introduction to the mechanical properties of solid polymers. Wiley, New York, p 93
27. Zeng MF, Sun XD, Wang Y et al (2008) A positron annihilation study on the microstructure of cyanate ester resin toughened by carboxyl-terminated butadiene-acrylonitrile rubber system. Polym Adv Technol 19:1664–167110.1002/pat.1185 ↗
28. Wu GN, Wu JD, Zhou LR et al (2010) Microscopic view of aging mechanism of polyimide film under pulse voltage in presence of partial discharge. IEEE Trans Dielectr Electr Insul 17:125–13210.1109/TDEI.2010.5412010 ↗
29. Mansour DE, Kojima H et al (2013) Physical mechanisms of partial discharges at nitrogen filled delamination in epoxy cast resin power apparatus. IEEE Trans Dielectr Electr Insul 20:454–46110.1109/TDEI.2013.6508747 ↗
30. Masood A, Zuberi MU, Mohsin MM (2013) Estimation of breakdown strength of solid insulating materials in ambient medium. Invertis J Sci Technol 6:16–1910.3923/jest.2013.16.28 ↗
31. Zha JW, Song HT, Dang ZM et al (2008) Mechanism analysis of improved corona-resistant characteristic in polyimide/TiO2 nanohybrid films. Appl Phys Lett 93:19291110.1063/1.3025408 ↗
32. Li HY, Guo L, Liu B, Chen W, Chen SF (2005) A study of dielectric properties of polymer/nano-titanium/dioxide composites film. Insul Mater 6:30–33
33. Preetha P, Thomas MJ (2011) AC breakdown characteristics of epoxy nanocomposites. IEEE Trans Dielectr Electr Insul 18:1526–153410.1109/TDEI.2011.6032821 ↗