journal article·2000-02

Dissolution behaviour of stainless steel weld metals during active potential range: A calculational approach

M. G. Pujar, R. K. Dayal, S. N. Malhotra, T. P. S. Gill

Journal of Materials Science· Volume 35· Issue 3
Publisher page

Abstract

Uniform or localised corrosion resistance of stainless steels is attributed to the presence of a tenacious passive film formed on the surface, the thickness and chemical composition of which depends on the applied potential. The protective properties of such films depend on the bulk composition of the alloy, presence of secondary phases and elemental segregation. In this paper the role of Cr, Mo and ferrite content on the anodic dissolution behaviour of type 316 austenitic stainless steel weld metals has been investigated. A calculational approach was tried in order to qualitatively understand the behaviour of the stainless steel weld metals with different chemical compositions and heat inputs. Extensive iterative calculations were carried out by using the experimental data on the anodic current values to arrive at the results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. K. Asami, M. Naka, K. Hashimoto and T. Masumoto, J. Electrochem. Soc. 127 (1980) 2130.10.1149/1.2129359 ↗
2. B. Brox and I. Olefjord, “Stainless Steels' 84” (The Institute of Metals, London, 1985) p. 134.
3. I. Olefjord and B.-O. Elfstrom, Corrosion 38 (1982) 46.10.5006/1.3577318 ↗
4. R. C. Newman, Corr. Sci. 25 (1985) 331.10.1016/0010-938X(85)90111-8 ↗
5. K. Hashimoto, K. Asami and K. Teramoto, ibid. 19 (1979) 3.10.1016/0010-938X(79)90003-9 ↗
6. R. Goetz and D. Landolt, Electrochim. Acta 27 (1982) 1061.10.1016/0013-4686(82)80110-2 ↗
7. S. Jin and A. Atrens, Appl. Phys. A46 (1988) 51.10.1007/BF00615137 ↗
8. T. G. Gooch, The Welding Institute Research Bulletin 1974, p. 183.
9. T. P. S. Gill and J. B. Gnanamoorthy, J. Mater. Sc. 17 (1982) 1513.10.1007/BF00752268 ↗
10. L. L. Shreir, R. A. Jarman and G. T. Burstein, “CORROSION-Metal/Environment Reaction,” 3rd ed. Vol. 1 (Butterworth-Heinsmanss Ltd., Oxford, 1994) pp. 1-88, 1-106.
11. AWS A 2-74: Standard procedures for calibrating magnetic instruments to measure the delta-ferrite content of austenitic stainless steel weld metal.
12. ASTM-G5-87: “Annual Book of ASTM Standards,” Section 3, Vol. 03.02, (ASTM, Philadelphia, 1992) pp. 73–79.
13. Y. H. Yau and M. A. Streicher,Corrosion 47 (1991) 352.10.5006/1.3585858 ↗
14. I. Olefjord, Mater. Sci. & Engg. 42 (1980) 161.10.1016/0025-5416(80)90025-7 ↗
15. I. Olefjord and B. Brox, “Passivity of Metals and Semi-conductors,” edited by M. Froment (Elsevier Science Publishers, Amsterdam, 1983) p. 56110.1016/B978-0-444-42252-1.50087-4 ↗
16. I. Olefjord, B. Brox and U. Jelvestram, J. Electrochem. Soc. 132 (1985) 2854.10.1149/1.2113683 ↗
17. S. Haupt and H. H. Strehblow, Corr. Sci. 37 (1995) 43.10.1016/0010-938X(94)00104-E ↗
18. I. Epelboin, M. Keddam, O. R. Mattos and H. Takenouti, ibid. 19 (1979) 1105.
19. B. Alexandre, A. Caprani, J. C. Charbonnier, M. Keddam and P. H. Morel, ibid. 21 (1981) 765.10.1016/0010-938X(81)90087-1 ↗
20. R. Oliver, Thesis, Leiden, 1955.
21. M. Klimmeck, Z. Metallkunde, 70 (1979) 260.
22. P. Y. Park, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto, Corr. Sci. 37 (1995) 1843.10.1016/0010-938X(95)00090-7 ↗
23. Y. C. Lu and C. R. Clayton, ibid. 29 (1989) 927.10.1016/0010-938X(89)90085-1 ↗
24. K. Sugimoto and Y. Sawada, ibid. 17 (1977) 425.10.1016/0010-938X(77)90032-4 ↗
25. H. C. Brookes, J. W. Bayles and F. J. Graham, J. Appl. Electrochem. 20 (1990) 223.10.1007/BF01033598 ↗
26. C. A. Olsson, Corr. Sci. 37 (1995) 467.10.1016/0010-938X(94)00148-Y ↗
27. J. N. Wanklyn, ibid. 21 (1981) 211.10.1016/0010-938X(81)90031-7 ↗
28. P. Marcus and J. Oudar, Appl. Suf. Sci. 3 (1979) 48.10.1016/0378-5963(79)90060-6 ↗
29. K. Hashimoto, “Passivity of Metals and Semiconductors,” edited by M. Froment (Elsevier, Amsterdam, 1983) p. 247.10.1016/B978-0-444-42252-1.50042-4 ↗
30. F. J. Graham, H. C. Brookes and J. W. Bayles, J. Appl. Electrochem. 20 (1990) 45.10.1007/BF01012470 ↗
31. M. A. Streicher, Corrosion 30 (1974) 77.10.5006/0010-9312-30.3.77 ↗
32. P. Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto, Corr. Sci. 36 (1994) 1395.10.1016/0010-938X(94)90188-0 ↗
33. M. A. A. Tullmin and F. P. A. Robinson, Corrosion 44 (1988) 664.10.5006/1.3584981 ↗