Fine tuning of terpolymer properties by incorporating electron-accepting difluorobenzene and diketopyrrolopyrrole units
Source abstract
Abstract
A series of low band gap terpolymers (PBDT–DFBx–DPPy) incorporating various ratios of two acceptor units, difluorobenzene (DFB) and diketopyrrolo[3,4-c]pyrrole (DPP), were synthesized by Pd-catalyzed Stille polymerization. The effects of the DFB and DPP units on UV–Vis absorption, highest occupied molecular orbital (HOMO) energy levels, and terpolymer: PC60BM solar cell performance, especially the short-circuit current (J sc), were investigated. The polymer films exhibited broad and intense absorption spectra, covering the spectral range from 300 nm up to 900 nm. The optical properties of these random terpolymers can be easily controlled by tuning the ratio between DFB and DPP; an increase in DFB induced increased absorption between 300 and 550 nm and a lower HOMO energy level. The terpolymer PBDT–DFB50–DPP50 with the percentage of DFB up to 50 % in the bulk heterojunction polymer solar cell showed a high open-circuit voltage of 0.74 V and a J sc of 7.83 mA cm−2. This study demonstrated that significant changes in polymer electronic properties can be tuned by the strategic combination of simple electron-deficient monomers and their composition in the random terpolymers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Nelson J (2011) Polymer: fullerene bulk heterojunction solar cells. Mater Today 14:462–47010.1016/S1369-7021(11)70210-3 ↗
2. Dou LT, You JB, Hong ZR, Xu Z, Li G, Street RA, yang Y (2013) 25th anniversary article: a decade of organic/polymeric photovoltaic research. Adv Mater 25:6642–667110.1002/adma.201302563 ↗
3. Li G, Zhu R, Yang Y (2012) Polymer solar cells. Nat Photonics 6:153–16110.1038/nphoton.2012.11 ↗
4. Cao JM, Liao QG, Du XY, Chen JH, Xia Z, Zuo QQ, Ding LM (2013) A pentacyclic a romatic lactam building block for efficient polymer solar cells. Energy Environ Sci 6:3224–322810.1039/c3ee41948g ↗
5. You JB, Dou LT, Yoshimura K, Kato T, Ohya K, Moriarty T, Emery K, Chen CC, Gao J, Li G, Yang Y (2013) A polymer tandem solar cell with 10.6 % power conversion efficiency. Nat Commun 4:1446–145510.1038/ncomms2411 ↗
6. He ZC, Zhong CM, Su SJ, Xu M, Wu HB, Cao Y (2012) Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat Photonics 6:591–59510.1038/nphoton.2012.190 ↗
7. Dou L, You J, Yang J, Chen CC, He Y, Murase S, Moriarty T, Emery K, Li G, Yang Y (2012) Tandem polymer solar cells featuring a spectrally matched low-band gap polymer. Nat Photonics 6:180–18510.1038/nphoton.2011.356 ↗
8. Zhang SQ, Ye L, Wang Q, Li ZJ, Guo X, Huo LJ, Fan HL, Hou JH (2013) Enhanced photovoltaic performance of diketopyrrolopyrrole (DPP)-based polymers with extended π conjugation. J Phys Chem C 117:9550–955710.1021/jp312450p ↗
9. Sun S, Zhang P, Li JF, Li YK, Wang JL, Zhang SJ, Xia YJ, Meng XJ, Fan DW, Chu JH (2014) Synthetically controlling the optoelectronic properties of dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-alt-diketopyrrolopyrrole-conjugated polymers for efficient solar cells. J Mater Chem A 2:15316–1532510.1039/C4TA01632G ↗
10. Kang TE, Kim KH, Kim BJ (2014) Design of terpolymers as electron donors for highly efficient polymer solar cells. J Mater Chem A 2:15252–1526710.1039/C4TA02426E ↗
11. Chao YH, Jheng JF, Wu JS, Wu KY, Peng HH, Tsai MC, Wang CL, Hsiao YN, Wang CL, Lin CY, Hsu CS (2014) Porphyrin-incorporated 2D D-A polymers with over 8.5 % polymer solar cell efficiency. Adv Mater 26:5205–521010.1002/adma.201401345 ↗
12. Wang H, Yu X, Yi C, Ren H, Liu C, Yang Y, Xiao S, Zheng J, Karim A, Cheng SZD, Gong X (2013) Fine-tuning of fluorinated thieno[3,4-b]thiophene copolymer for efficient polymer solar cells. J Phys Chem C 117:4358–436310.1021/jp311031s ↗
13. Jung JW, Liu F, Russell TP, Jo WH (2013) Semi-crystalline random conjugated copolymers with panchromatic absorption for highly efficient polymer solar cells. Energy Environ Sci 6:3301–330710.1039/c3ee40689j ↗
14. Kang TE, Cho HH, Kim H, Lee W, Kang H, Kim BJ (2013) Importance of optimal composition in random terpolymer-based polymer solar cells. Macromolecules 46:6806–681310.1021/ma401274r ↗
15. Deng Z, Chen L, Wu F, Chen Y (2014) Novel donor-acceptor random copolymers containing phenanthrocarbazole and diketopyrrolopyrrole for organic photovoltaics and the significant molecular geometry effect on their performance. J Phys Chem C 118:6038–604510.1021/jp411286w ↗
16. Zhou J, Xie S, Amond EF, Becker ML (2013) Tuning energy levels of low band gap semi-random two acceptor copolymers. Macromolecules 46:3391–339410.1021/ma400531v ↗
17. Hendriks KH, Heintges GH, Gevaerts VS, Wienk MM, Janssen RA (2013) High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. Angew Chem Int Ed 52:8341–834410.1002/anie.201302319 ↗
18. Li W, Furlan A, Christian Roelofs WS, Hendriks KH, Pruissen GWP, Wienk MM, Janssen RAJ (2014) Wide band gap diketopyrrolopyrrole-based conjugated polymers incorporating biphenyl units applied in polymer solar cells. Chem Commun 50:679–68110.1039/C3CC47868H ↗
19. Zhou HX, Yang LQ, Stuart AC, Price SC, Liu S, You W (2011) Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency. Angew Chem 123:3051–305410.1002/ange.201005451 ↗
20. Park JH, Jung EH, Jung JW, Jo WH (2013) A fluorinated phenylene unit as a building block for high-performance n-type semiconducting polymer. Adv Mater 25:2583–258810.1002/adma.201205320 ↗
21. Wang Z, Li Z, Zhang H, Liu W, Xu X, Si C, Cui Y, Sun Q, Wang H, Shi F, Hao YA (2014) Conjugated random copolymer of benzodithiophene–difluorobenzene–diketopyrrolopyrrole with full visible-light absorption for bulk-heterojunction solar cells. Macromol Chem Phys 215:2119–212410.1002/macp.201400334 ↗
22. Li Z, Qiao Z, Liu W, Wang Z, Wang H, Shi F, Hao Y (2015) Conjugated random copolymer of benzodithiophene–difluorobenzene–diketopyrrolopyrrole–benzothiadiazole with a broad absorption range of 300–900 nm for bulk heterojunction solar cells. Mater Lett 139:307–31010.1016/j.matlet.2014.10.122 ↗
23. Liu C, Wang K, Hu X, Yang Y, Hsu CH, Zhang W, Xiao S, Gong X, Cao Y (2013) Molecular weight effect on the efficiency of polymer solar cells. ACS Appl Mater Interfaces 5:12163–1216710.1021/am404157t ↗
24. Li WT, Yang LQ, Tumbleston JR, Yan L, Ade H, You W (2014) Controlling molecular weight of a high efficiency donor-acceptor conjugated polymer and understanding its significant impact on photovoltaic properties. Adv Mater 26:4456–446210.1002/adma.201305251 ↗
25. Dou L, Gao J, Richard E, You J, Chen CC, Cha KC, He Y, Li G, Yang Y (2012) Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells. J Am Chem Soc 134:10071–1007910.1021/ja301460s ↗
26. Liang Y, Feng D, Wu Y, Tsai ST, Li G, Ray C, Yu LP (2009) Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties. J Am Chem Soc 131:7792–779910.1021/ja901545q ↗
27. Wang E, Hou L, Wang Z, Hellström S, Mammo W, Zhang F, Inganäs O, Andersson MR (2010) Small band gap polymers synthesized via a modified nitration of 4,7-dibromo-2,1,3-benzothiadiazole. Org Lett 12:4470–447310.1021/ol1020724 ↗
28. Kang TE, Cho H, Cho C, Kim K, Kang H, Lee M, Lee S, Kim B, Im C, Kim BJ (2013) Photoinduced charge transfer in donor-acceptor (DA) copolymer: fullerene bis-adduct polymer solar cells. ACS Appl Mater Interfaces 5:861–86810.1021/am302479u ↗
29. Wu PT, Kim FS, Champion RD, Jenekhe SA (2008) Conjugated donor-acceptor copolymer semiconductors. Synthesis, optical properties, electrochemistry, and field-effect carrier mobility of pyridopyrazine-based copolymers. Macromolecules 41:7021–702810.1021/ma801348b ↗
30. Shen P, Bin H, Xiao L, Li Y (2013) Enhancing photovoltaic performance of copolymers containing thiophene unit with D−A conjugated side chain by rational molecular design. Macromolecules 46:9575–958610.1021/ma401886a ↗
31. Li W, Roelofs WSC, Wienk MM, Janssen RAJ (2012) Enhancing the photocurrent in diketopyrrolopyrrole-based polymer solar cells via energy level control. J Am Chem Soc 134:13787–1379510.1021/ja305358z ↗