journal article·2022-12

Effect of CeO2 on Al–Ti–C and matrix conversion between TiC and α-Al orientation relationship

Tong Liu, Maoliang Hu, Fei Wang, Bo Jiang, Zesheng Ji

Journal of Materials Science· Volume 57· Issue 48
Publisher page

Abstract

AT the present study, Al–5Ti–0.25C–1Ce alloy was prepared by using Al chips, Ti chips, graphite powder and CeO2 powder as raw materials under different process conditions. The effects of reaction temperature and time on the microstructure and refinement effect of Al–5Ti–0.25C–1Ce were systematically investigated. The results show that the best preparation process is holding at 1273 K for 80 min; the best refinement process for commercially pure aluminum is 1.0 wt% addition and having for 2 min. EDS analysis of the refined pure aluminum confirmed that the reason for the deterioration of refinement in the Al–Ti–C–Ce system is the massive generation of AlxCy with time, which has a high lattice mismatch with α-Al, leading to the decline of refinement. In addition to this, we demonstrate that TiC crystal plane or direction paralleled to a certain crystal plane or direction of α-Al can be obtained by a specific matrix equation arising from selected area electron diffraction: $$left[ {egin{array}{*{20}l} U \ V \ W \ end{array} } ight]_{{{ ext{TiC}}}} = left[ {egin{array}{*{20}c} 0 & {1.0659} & 0 \ {1.0659} & 0 & 0 \ 0 & 0 & { - 1.0659} \ end{array} } ight]left[ {egin{array}{*{20}c} U \ V \ W \ end{array} } ight]_{{{ ext{Al}}}} ,;left[ {egin{array}{*{20}c} H \ K \ L \ end{array} } ight]_{{{ ext{TiC}}}} = left[ {egin{array}{*{20}c} 0 & {0.93817} & 0 \ {0.93817} & 0 & 0 \ 0 & 0 & { - 0.93817} \ end{array} } ight]left[ {egin{array}{*{20}l} H \ K \ L \ end{array} } ight]_{{{ ext{Al}}}}$$ . Which effectively makes up for the heavy labor of obtaining a single orientation relationship from a single high-resolution transmission electron microscope image and the difficulty in capturing high-definition phase interface information originating from insufficient instrument resolution.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Ezugwu EO, Wang ZM (1997) Titanium alloys and their machinability—a review. J Mater Process Technol 68(3):262–274. https://doi.org/10.1016/S0924-0136(96)00030-110.1016/S0924-0136(96)00030-1 ↗
2. Venugopal KA, Paul S, Chattopadhyay AB (2007) Growth of tool wear in turning of Ti–6Al–4V alloy under cryogenic cooling. Wear 262(9):1071–1078. https://doi.org/10.1016/j.wear.2006.11.01010.1016/j.wear.2006.11.010 ↗
3. Gao YY, Qiu F, Zhao QL et al (2019) A new approach for improving the elevated-temperature strength and ductility of Al–Cu–Mg–Si alloys with minor amounts of dual-phased submicron/nanosized TiB2–TiC particles. Mater Sci Eng A 764:138266. https://doi.org/10.1016/j.msea.2019.13826610.1016/j.msea.2019.138266 ↗
4. Masuda T, Sauvage X, Hirosawa S et al (2020) Achieving highly strengthened Al–Cu–Mg alloy by grain refinement and grain boundary segregation. Mater Sci Eng A 793:139668. https://doi.org/10.1016/j.msea.2020.13966810.1016/j.msea.2020.139668 ↗
5. Jia P, Zhang J, Sheng M et al (2019) Effects of Al–3Ti–3B–1Y master alloy on the microstructure, mechanical properties and electrical properties of Al–9Si–0.5Mg casting alloy. Mater Res Express 6(12):126523. https://doi.org/10.1088/2053-1591/ab538410.1088/2053-1591/ab5384 ↗
6. Li Y, Hu B, Liu B et al (2020) Insight into Si poisoning on grain refinement of Al–Si/Al–5Ti–B system. Acta Mater 187:51–65. https://doi.org/10.1016/j.actamat.2020.01.03910.1016/j.actamat.2020.01.039 ↗
7. Lee YC, Dahle AK, Stjohn DH et al (1999) The effect of grain refinement and silicon content on grain formation in hypoeutectic Al–Si alloys. Mater Sci Eng A 259(1):43–52. https://doi.org/10.1016/S0921-5093(98)00884-310.1016/S0921-5093(98)00884-3 ↗
8. Cibula A (1950) The mechanism of grain refinement of sand castings in aluminum alloys. Jinst Inst Met 76:321–360
9. Ding W, Zhao W, Xia T (2014) Grain refining action of Al–5Ti–C and Al–TiC master alloys with Al–5Ti master alloy addition for commercial purity aluminium. Int J Cast Met Res 27(3):187–192. https://doi.org/10.1179/1743133614Y.000000010610.1179/1743133614Y.0000000106 ↗
10. Ding WW, Chen TL, Zhao XY et al (2018) Effect of CeO2 on microstructure and synthesis mechanism of Al–Ti–C Alloy. Materials 11(12):2508. https://doi.org/10.3390/ma1112250810.3390/ma11122508 ↗
11. Xu C, Liang L, Lu B et al (2006) Effect of La on microstructure and grain-refining performance of Al–Ti–C grain refiner. J Rare Earths 24(5):596–601. https://doi.org/10.1016/S1002-0721(06)60171-310.1016/S1002-0721(06)60171-3 ↗
12. Zhao H, Song Y, Li M et al (2010) Grain refining efficiency and microstructure of Al–Ti–C–RE master alloy. J Alloy Compd 508(1):206–211. https://doi.org/10.1016/j.jallcom.2010.08.04710.1016/j.jallcom.2010.08.047 ↗
13. Ding W, Zhang X, Zhao W et al (2015) Microstructure of A1–5Ti–0.6C–1Ce master alloy and its grain-refining performance. Int J Mater Res 106:1–4. https://doi.org/10.3139/146.11130010.3139/146.111300 ↗
14. Wang Y, Li HT, Fan Z (2012) Oxidation of aluminium alloy melts and inoculation by oxide particles. Trans Indian Inst Met 65(6):653–661. https://doi.org/10.1007/s12666-012-0194-x10.1007/s12666-012-0194-x ↗
15. Xu C, Xiao W, Zhao W et al (2015) Microstructure and formation mechanism of grain-refining particles in Al–Ti–C–RE grain refiners. J Rare Earths 33(5):553–560. https://doi.org/10.1016/s1002-0721(14)60455-510.1016/s1002-0721(14)60455-5 ↗
16. Cai J, Kulovits A, Ravi Shankar M et al (2008) Novel microstructures from severely deformed Al–Ti alloys created by chip formation in machining. J Mater Sci 43(23):7474–7480. https://doi.org/10.1007/s10853-008-2887-410.1007/s10853-008-2887-4 ↗
17. Qian P, Tang Z, Yuan M et al (2019) Microstructure and refinement mechanism of TiB2/TiAl3 in remelted Al–5Ti–1B system. Mater Sci Technol 35(13):1563–1571. https://doi.org/10.1080/02670836.2019.162952610.1080/02670836.2019.1629526 ↗
18. Zhao J, He J, Tang Q et al (2016) Grain refinement efficiency in commercial-purity aluminum influenced by the addition of Al–4Ti master alloys with varying TiAl3 particles. Materials 9(11):869. https://doi.org/10.3390/ma911086910.3390/ma9110869 ↗
19. Finsy R (2004) On the critical radius in ostwald ripening. Langmuir 20(7):2975–2976. https://doi.org/10.1021/la035966d10.1021/la035966d ↗
20. Yu H, Wang N, Guan R et al (2018) Evolution of secondary phase particles during deformation of Al–5Ti–1B master alloy and their effect on α-Al grain refinement. J Mater Sci Technol 34(12):2297–2306. https://doi.org/10.1016/j.jmst.2018.04.01810.1016/j.jmst.2018.04.018 ↗
21. Holt JB, Munir ZA (1986) Combustion synthesis of titanium carbide: theory and experiment. J Mater Sci 21:251–259. https://doi.org/10.1007/bf0114472910.1007/bf01144729 ↗
22. Zhao H, Song Y, Li M, Guan S (2010) Grain refining efficiency and microstructure of Al–Ti–C–RE master alloy. J Alloy Compd 508(1):206–211. https://doi.org/10.1016/j.jallcom.2010.08.04710.1016/j.jallcom.2010.08.047 ↗
23. Vinod Kumar GS, Murty BS, Chakraborty M (2010) Settling behaviour of TiAl3, TiB2, TiC and AlB2 particles in liquid Al during grain refinement. Int J Cast Met Res 23(4):193–204. https://doi.org/10.1179/136404610x1266508853749110.1179/136404610x12665088537491 ↗
24. Limmaneevichitr C, Eidhed W (2003) Fading mechanism of grain refinement of aluminum–silicon alloy with Al–Ti–B grain refiners. Mater Sci Eng A 349(1–2):197–206. https://doi.org/10.1016/s0921-5093(02)00751-710.1016/s0921-5093(02)00751-7 ↗
25. Dong B-X, Yang H-Y, Qiu F, Li Q, Shu S-L, Zhang B-Q, Jiang Q-C (2019) Design of TiCx nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: experiment and first-principle calculation. Mater Des 181:107951. https://doi.org/10.1016/j.matdes.2019.10795110.1016/j.matdes.2019.107951 ↗
26. Yang H, Gao T, Wang H, Nie J, Liu X (2017) Influence of C/Ti stoichiometry in TiCx on the grain refinement efficiency of Al–Ti–C master alloy. J Mater Sci Technol 33(7):616–622. https://doi.org/10.1016/j.jmst.2017.04.01510.1016/j.jmst.2017.04.015 ↗
27. Yoon G-Y, Lee JS, Heo Y-U (2020) Accurate determination of orientation relationship between ferrite and (Fe, Mn)3AlC in an Fe–Mn–Al–C eutectoid alloy. Mater Lett 272:127849. https://doi.org/10.1016/j.matlet.2020.12784910.1016/j.matlet.2020.127849 ↗
28. Nemirovskii YR, Khadyev MS, Lesnikov VP, Kuznetsov VP, Galoyan AG (2008) Formation of the mu phase in the transition zone of a diffusion chromium aluminide coating on a nickel superalloy. Phys Met Metallogr 106:389–398. https://doi.org/10.1134/S0031918X0810009810.1134/S0031918X08100098 ↗
29. Zhao B, Cai Q, Cheng J, Yang S, Chen F (2019) Investigation on recrystallization and precipitation behaviors of Al–4.5Cu–1.5 Mg alloy refined by Ti-supported TiC nanoparticles. J Alloy Compd 800:392–402. https://doi.org/10.1016/j.jallcom.2019.05.32310.1016/j.jallcom.2019.05.323 ↗
30. Hu Z, Cao C, Pozuelo M, Sokoluk M, Yang J-M, Li X (2019) Microstructure formation and micropillar compression of Al–TiC nanocomposite manufactured by solidification nanoprocessing. Metall and Mater Trans A 50:4620–4631. https://doi.org/10.1007/s11661-019-05389-510.1007/s11661-019-05389-5 ↗
31. Gao Y-Y, Qiu F, Zhao Q-L, Jiang Q-C (2019) A new approach for improving the elevated-temperature strength and ductility of Al–Cu–Mg–Si alloys with minor amounts of dual-phased submicron/nanosized TiB2–TiC particles. Mater Sci Eng A 764:138266. https://doi.org/10.1016/j.msea.2019.13826610.1016/j.msea.2019.138266 ↗